P2067 2014 GMC Sierra Code - Fuel Level Sensor 2 Circuit Low Voltage
Quick Answer
The P2067 diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically refers to the Fuel Level Sensor 2 Circuit Low Voltage. Common causes include Faulty fuel level sensor 2, Damaged or corroded wiring connecting the sensor to the ECM, Poor electrical connection between the sensor and the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2067 2014 GMC Sierra indicates Fuel Level Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty fuel level sensor 2, Damaged or corroded wiring connecting the sensor to the ECM, Poor electrical connection between the sensor and the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2067 2014 GMC Sierra Description
The P2067 diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically refers to the Fuel Level Sensor 2 Circuit Low Voltage. This code indicates that the fuel level sensor 2 in the vehicle's fuel tank is sending a signal to the engine control module (ECM) that is lower than expected. The fuel level sensor is responsible for sending the ECM information about the amount of fuel in the tank, allowing the ECM to adjust fuel delivery and optimize engine performance. When the voltage from the fuel level sensor 2 is too low, it can lead to inaccurate fuel level readings, which can affect the vehicle's performance and fuel efficiency.
Common Causes of P2067 2014 GMC Sierra
- Faulty fuel level sensor 2.
- Damaged or corroded wiring connecting the sensor to the ECM.
- Poor electrical connection between the sensor and the ECM.
- ECM software issue affecting the interpretation of the sensor's signal.
- Fuel contamination affecting the sensor's operation.
Symptoms of P2067 2014 GMC Sierra
- Inaccurate fuel level readings on the dashboard.
- Check Engine Light illuminated on the dashboard.
- Poor engine performance, such as hesitation or rough idling.
- Reduced fuel efficiency.
- Engine stalling or difficulty starting.
How to Fix P2067 2014 GMC Sierra
- Diagnose the issue by using a scan tool to read the P2067 code and check the fuel level sensor 2's voltage output.
- Inspect the wiring and connections between the sensor and the ECM for any damage or corrosion.
- Test the fuel level sensor 2 for proper operation or replace it if necessary.
- Clear the DTC and reset the ECM to see if the issue is resolved.
- Test drive the vehicle to ensure the problem is fixed and the code does not return.
Cost to Fix P2067 2014 GMC Sierra
The typical repair costs for addressing a P2067 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. In general, replacing a faulty fuel level sensor 2 and addressing any wiring or connection issues can range from $150 to $300 for parts and labor. However, it's important to note that the cost can be higher if additional components need to be replaced or if the diagnosis process is more complex. Additionally, labor rates at auto repair shops can vary between $80 and $150 per hour, so it's advisable to check local rates for a more accurate estimate.
Tech Notes for P2067 2014 GMC Sierra
Need more information about the P2067 2014 GMC Sierra code?
Need more information on how to fix the P2067 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2067 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2067 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code P2067 in a 2014 GMC Sierra related to the Fuel Level Sensor 2 Circuit Low Voltage?
- Common symptoms include inaccurate fuel level readings on the dashboard, fluctuating fuel gauge readings, and the fuel gauge staying at empty even when there is fuel in the tank.
2. What are the possible causes of the Fuel Level Sensor 2 Circuit Low Voltage OBDII code (P2067) in a 2014 GMC Sierra?
- The code P2067 can be triggered by issues such as a faulty fuel level sensor, damaged wiring or connectors in the fuel level sensor circuit, or a problem with the vehicle's PCM (Powertrain Control Module).
3. How can I diagnose the cause of the P2067 code in my 2014 GMC Sierra related to the fuel level sensor?
- Diagnosing the issue involves checking the fuel level sensor and its wiring for any damage, testing the sensor's resistance, inspecting the connectors for corrosion, and scanning the vehicle's PCM for any related error codes.
4. Can a DIY enthusiast repair the Fuel Level Sensor 2 Circuit Low Voltage issue (P2067) in a 2014 GMC Sierra?
- Repairing the P2067 code may require specialized tools and knowledge, so it is recommended to consult a professional mechanic for accurate diagnosis and repair.
5. Is it safe to continue driving my 2014 GMC Sierra with the P2067 code related to the Fuel Level Sensor 2 Circuit Low Voltage?
- While the vehicle may still be operational with the P2067 code, it is not advisable to continue driving as inaccurate fuel level readings can lead to running out of fuel unexpectedly. Seek professional assistance to resolve the issue promptly.
6. How much does it typically cost to repair the Fuel Level Sensor 2 Circuit Low Voltage issue (P2067) in a 2014 GMC Sierra?
- Repair costs can vary depending on the exact cause of the issue. It is recommended to obtain quotes from reputable mechanics or dealerships to determine the cost of parts and labor for the repair.
7. Are there any preventive maintenance tips to avoid triggering the P2067 code related to the Fuel Level Sensor in a 2014 GMC Sierra?
- Regularly checking and maintaining the fuel level sensor, ensuring proper wiring connections, and promptly addressing any fuel system issues can help prevent the occurrence of the P2067 code.
8. Can a faulty fuel level sensor impact the overall performance of a 2014 GMC Sierra, aside from triggering the P2067 code?
- Yes, a faulty fuel level sensor can affect the vehicle's performance by causing inaccurate fuel level readings, leading to potential fuel-related issues and impacting overall driving experience.
9. How long does it typically take to repair the Fuel Level Sensor 2 Circuit Low Voltage issue (P2067) in a 2014 GMC Sierra?
- Repair times can vary based on the exact cause of the issue and the availability of parts. It is recommended to consult with a mechanic to get an estimate of the repair timeline.
10. Can resetting the OBDII system clear the P2067 code in a 2014 GMC Sierra, or is professional diagnosis and repair necessary?
- While resetting the OBDII system may temporarily clear the code, it is crucial to address the underlying issue causing the P2067 code by seeking professional diagnosis and repair to prevent the problem from recurring.
Discuss the causes and fixes for P2067 2014 GMC Sierra OBDII Code
Code P2067 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.