P2067 2011 Ford Fusion Code - Fuel Level Sensor 'B' Circuit Low
Quick Answer
The diagnostic trouble code (DTC) P2067 for a 2011 Ford Fusion indicates that there is an issue with the Fuel Level Sensor 'B' Circuit, specifically that the circuit is reading a lower than expected voltage. Common causes include Faulty fuel level sensor, Corrosion or damage to the sensor wiring, Poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2067 2011 Ford Fusion indicates Fuel Level Sensor 'B' Circuit Low.
- Common causes
- Common causes include Faulty fuel level sensor, Corrosion or damage to the sensor wiring, Poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2067 2011 Ford Fusion Description
The diagnostic trouble code (DTC) P2067 for a 2011 Ford Fusion indicates that there is an issue with the Fuel Level Sensor 'B' Circuit, specifically that the circuit is reading a lower than expected voltage. The fuel level sensor is responsible for sending information about the fuel level in the tank to the vehicle's engine control module (ECM). This information is crucial for the ECM to accurately calculate fuel consumption, adjust air-fuel mixture, and optimize engine performance.
Common Causes of P2067 2011 Ford Fusion
- Faulty fuel level sensor
- Corrosion or damage to the sensor wiring
- Poor electrical connection
- ECM software issue
- Fuel pump malfunction
Symptoms of P2067 2011 Ford Fusion
- Inaccurate fuel level readings on the dashboard gauge
- Engine running rich or lean
- Decreased fuel efficiency
- Engine stalling
- Check Engine Light illuminated
How to Fix P2067 2011 Ford Fusion
- Diagnose the issue by using a scan tool to read the DTC and inspecting the fuel level sensor and its wiring for any visible damage.
- Replace the fuel level sensor if it is found to be faulty.
- Repair or replace any damaged wiring or connectors.
- Clear the DTC and reset the ECM to see if the issue is resolved.
- Test drive the vehicle to ensure the problem is fixed and the code does not return.
Cost to Fix P2067 2011 Ford Fusion
The cost of repairing a Fuel Level Sensor 'B' Circuit Low issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, the cost of replacing a fuel level sensor can range from $150 to $300, including parts and labor. Additional costs may apply if there is damage to the wiring or connectors that need to be repaired or replaced. It's recommended to consult with a trusted mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary, with rates typically ranging from $80 to $150 per hour.
Need more information about the P2067 2011 Ford Fusion code?
Need more information on how to fix the P2067 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2067 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2067 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P2067 in a 2011 Ford Fusion related to the Fuel Level Sensor 'B' Circuit Low?
The common symptoms include inaccurate fuel level readings on the dashboard, fuel gauge fluctuations, and potential issues with fuel consumption calculations.
2. What are the possible causes of OBDII code P2067 in a 2011 Ford Fusion?
Possible causes include a faulty fuel level sensor, damaged wiring or connectors in the fuel level sensor circuit, a defective fuel pump module, or issues with the vehicle's powertrain control module (PCM).
3. How can I diagnose the Fuel Level Sensor 'B' Circuit Low issue in my 2011 Ford Fusion?
Diagnosis typically involves using an OBDII scanner to retrieve the trouble codes, conducting a visual inspection of the fuel level sensor and its wiring, and performing electrical tests to check for proper voltage and continuity in the circuit.
4. Is it safe to continue driving my 2011 Ford Fusion with OBDII code P2067 active?
It is generally not recommended to drive the vehicle with this code active, as inaccurate fuel level readings can lead to running out of fuel unexpectedly. It is best to address the issue promptly to avoid potential problems.
5. Can I repair OBDII code P2067 in my 2011 Ford Fusion myself?
While some DIY enthusiasts may attempt to diagnose and repair this issue themselves, it is recommended to seek professional help, especially if you are not experienced with automotive electrical systems. Proper diagnosis and repair are crucial to resolving the problem effectively.
6. How much does it typically cost to fix OBDII code P2067 in a 2011 Ford Fusion?
The cost of repair can vary depending on the exact cause of the issue. It may involve replacing the fuel level sensor, repairing damaged wiring, or addressing other underlying problems. Costs can range from a few hundred to over a thousand dollars, including parts and labor.
7. Will resetting the OBDII code P2067 in my 2011 Ford Fusion make the issue go away?
Resetting the code without addressing the root cause of the problem will not fix the issue permanently. The code is likely to reappear once the problem persists, so it is important to diagnose and repair the underlying issue to resolve it effectively.
8. Can a bad fuel level sensor cause other problems in my 2011 Ford Fusion?
A faulty fuel level sensor can lead to inaccurate fuel level readings and potentially affect other systems that rely on this data, such as fuel management and emissions control. It is essential to address the issue to prevent further complications.
9. How long does it typically take to repair OBDII code P2067 in a 2011 Ford Fusion?
The repair time can vary depending on the exact cause of the issue and the extent of the repair needed. Simple fixes like replacing a sensor may take a few hours, while more complex issues could require a day or more to diagnose and repair.
10. Is OBDII code P2067 a common issue in 2011 Ford Fusion vehicles?
While not as common as some other OBDII codes, issues related to the Fuel Level Sensor 'B' Circuit Low can occur in 2011 Ford Fusion models. Proper maintenance and prompt attention to any warning signs can help prevent this and other potential problems.
Discuss the causes and fixes for P2067 2011 Ford Fusion OBDII Code
Code P2067 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.