Engine-Codes.com
Engine-Codes – Generic – P2034

P2034 Code - Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 2

Quick Answer

The P2034 diagnostic trouble code (DTC) refers to an issue with the Exhaust Gas Temperature (EGT) sensor circuit for Bank 2 Sensor 2 in the vehicle's exhaust system. Common causes include Faulty EGT Sensor: The sensor itself may be malfunctioning, providing inaccurate data to the ECM, Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the EGT sensor can cause circuit problems, ECM Malfunction: A malfunctioning engine control module may not be able to interpret the data from the EGT sensor correctly. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P2034 indicates Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 2.
Common causes
Common causes include Faulty EGT Sensor: The sensor itself may be malfunctioning, providing inaccurate data to the ECM, Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the EGT sensor can cause circuit problems, ECM Malfunction: A malfunctioning engine control module may not be able to interpret the data from the EGT sensor correctly.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2034 Description

The P2034 diagnostic trouble code (DTC) refers to an issue with the Exhaust Gas Temperature (EGT) sensor circuit for Bank 2 Sensor 2 in the vehicle's exhaust system. This sensor plays a crucial role in monitoring the exhaust gas temperature levels to ensure optimal performance and emissions compliance of the vehicle. Bank 2 Sensor 2 typically indicates the sensor located after the catalytic converter on the side of the engine with the cylinder #2.

OBDII Code P2034 - Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 2
P2034 Code - Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 2

Common Causes of P2034

  1. Faulty EGT Sensor: The sensor itself may be malfunctioning, providing inaccurate data to the ECM.
  2. Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the EGT sensor can cause circuit problems.
  3. ECM Malfunction: A malfunctioning engine control module may not be able to interpret the data from the EGT sensor correctly.
  4. Exhaust System Leaks: Any leaks in the exhaust system near the EGT sensor can affect its readings and trigger the code.
  5. Sensor Placement: If the EGT sensor is improperly placed or installed, it may not be able to accurately measure the exhaust gas temperature.

Symptoms of P2034

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Decreased Fuel Efficiency: A faulty EGT sensor can lead to incorrect fuel mixture, resulting in decreased fuel efficiency.
  3. Reduced Engine Performance: The vehicle may experience a loss of power or sluggish acceleration due to incorrect data from the EGT sensor.
  4. Increased Emissions: A faulty EGT sensor can cause the vehicle to produce higher emissions than normal, potentially leading to a failed emissions test.
  5. Rough Idle: In some cases, the engine may exhibit rough idling or misfires due to the issues with the EGT sensor circuit.

How to Fix P2034

  1. Diagnose the Issue: Use a diagnostic scanner to retrieve the specific trouble code and pinpoint the exact cause of the problem.
  2. Inspect EGT Sensor: Check the EGT sensor for any signs of damage or corrosion. Replace the sensor if necessary.
  3. Check Wiring: Inspect the wiring harness connected to the EGT sensor for any damage or loose connections. Repair or replace as needed.
  4. Clear Codes: After making the necessary repairs, clear the DTC using the diagnostic scanner to reset the check engine light.
  5. Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the check engine light does not reappear.

Cost to Fix P2034

The typical repair costs for addressing a P2034 code can range from $150 to $400, depending on the extent of the issue and the parts needed for replacement. This estimate includes the cost of the EGT sensor, wiring repairs, and labor charges. However, it's essential to note that the actual costs can vary based on the location, vehicle make and model, and the specific diagnosis time and labor rates at the auto repair shop. It's recommended to obtain a detailed quote from a reputable mechanic or repair shop for a more accurate estimate.

Need more information about the P2034 code?

Need more information on how to fix the P2034 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2034 code diagnosed by a professional: Find a repair shop in your area

Code P2034 Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2034 Code

No Frequently Asked Questions about P2034 Code found.

Discuss the causes and fixes for P2034 OBDII Code

Submit a New Comment

Code P2034 comments

No comments found for this page.