P2033 2016 GMC Sierra Code - Exhaust Gas Temperature Sensor 2 Circuit High Voltage
Quick Answer
The P2033 diagnostic trouble code (DTC) on a 2016 GMC Sierra indicates a problem with the Exhaust Gas Temperature Sensor 2 Circuit High Voltage. Common causes include Faulty exhaust gas temperature sensor, Wiring issue in the sensor circuit, ECM malfunction. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P2033 2016 GMC Sierra indicates Exhaust Gas Temperature Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty exhaust gas temperature sensor, Wiring issue in the sensor circuit, ECM malfunction.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2033 2016 GMC Sierra Description
The P2033 diagnostic trouble code (DTC) on a 2016 GMC Sierra indicates a problem with the Exhaust Gas Temperature Sensor 2 Circuit High Voltage. This sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine. When the sensor detects a high voltage signal, it means that the exhaust gas temperature is higher than expected, which can lead to a variety of performance issues.
Common Causes of P2033 2016 GMC Sierra
- Faulty exhaust gas temperature sensor
- Wiring issue in the sensor circuit
- ECM malfunction
- Exhaust system leak
- Engine running too hot
Symptoms of P2033 2016 GMC Sierra
- Check engine light illuminated on the dashboard
- Reduced fuel economy
- Reduced engine performance
- Increased emissions
- Rough idling or misfiring
How to Fix P2033 2016 GMC Sierra
- Begin by diagnosing the specific cause of the high voltage reading with a scan tool to pinpoint the issue.
- Inspect the exhaust gas temperature sensor and its wiring for any signs of damage or wear. Replace the sensor if necessary.
- Check the ECM for any fault codes or malfunctions. Reset or replace the ECM as needed.
- Repair any exhaust system leaks that may be contributing to the issue.
- Clear the DTC and test drive the vehicle to ensure the problem has been resolved.
Cost to Fix P2033 2016 GMC Sierra
The typical repair costs for addressing a P2033 DTC on a 2016 GMC Sierra can range from $150 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that the diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check local rates for a more precise estimate. In general, most auto repair shops charge between $80 and $150 per hour for labor.
Tech Notes for P2033 2016 GMC Sierra
Need more information about the P2033 2016 GMC Sierra code?
Need more information on how to fix the P2033 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2033 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2033 2016 GMC Sierra Code
What does the OBDII code P2033 mean on a 2016 GMC Sierra?
P2033 indicates a high voltage issue in the Exhaust Gas Temperature (EGT) Sensor 2 circuit, which monitors exhaust temperatures to optimize emissions control.
What are the common symptoms of code P2033 on a 2016 GMC Sierra?
Symptoms may include a check engine light, reduced fuel efficiency, increased emissions, or potentially reduced engine performance.
What causes the P2033 code to appear on a 2016 GMC Sierra?
Common causes include a faulty EGT Sensor 2, damaged wiring or connectors, excessive exhaust temperatures, or issues with the vehicle’s emissions control system.
Can I drive my 2016 GMC Sierra with code P2033 active?
Driving with this code is possible but not recommended, as it could lead to increased emissions, reduced efficiency, and potential damage to the exhaust system.
How do I diagnose the P2033 code on a 2016 GMC Sierra?
Start by inspecting the wiring and connectors for damage or corrosion, then test the EGT Sensor 2 for proper operation using a multimeter or diagnostic tool.
How do I fix code P2033 on a 2016 GMC Sierra?
Repairs typically involve replacing the faulty EGT Sensor 2, repairing damaged wiring, or addressing any underlying exhaust system issues.
How much does it cost to fix code P2033 on a 2016 GMC Sierra?
Repair costs vary but typically range from $100 to $300, depending on whether the sensor or wiring needs replacement.
Can a faulty EGT Sensor 2 cause other problems on a 2016 GMC Sierra?
Yes, a malfunctioning sensor can lead to inaccurate exhaust temperature readings, affecting emissions and potentially causing damage to the catalytic converter.
How can I prevent code P2033 from occurring on my 2016 GMC Sierra?
Regular maintenance, including inspecting exhaust system components and ensuring wiring is intact, can help prevent this issue.
Do I need special tools to repair code P2033 on a 2016 GMC Sierra?
Basic tools like a multimeter and a socket set are usually sufficient, but a diagnostic scanner may be helpful for pinpointing the issue.
Discuss the causes and fixes for P2033 2016 GMC Sierra OBDII Code
Code P2033 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.