P2017 KIA Code - Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1
Quick Answer
The P2017 diagnostic trouble code for KIA vehicles indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit High on Bank 1. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch: The sensor itself may be malfunctioning and sending a high voltage signal to the ECM, Damaged Wiring or Connectors: Wiring or connectors in the circuit may be damaged, causing a high voltage reading, Stuck Intake Manifold Runner Valves: The intake manifold runner valves may be stuck in a specific position, causing the sensor to detect a high voltage signal. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2017 KIA indicates Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch: The sensor itself may be malfunctioning and sending a high voltage signal to the ECM, Damaged Wiring or Connectors: Wiring or connectors in the circuit may be damaged, causing a high voltage reading, Stuck Intake Manifold Runner Valves: The intake manifold runner valves may be stuck in a specific position, causing the sensor to detect a high voltage signal.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2017 KIA Description
The P2017 diagnostic trouble code for KIA vehicles indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit High on Bank 1. This sensor is responsible for monitoring the position of the intake manifold runner valves, which control the airflow into the engine. When this sensor detects a high voltage signal in the circuit, it triggers the P2017 code.
Common Causes of P2017 KIA
- Faulty Intake Manifold Runner Position Sensor/Switch: The sensor itself may be malfunctioning and sending a high voltage signal to the ECM.
- Damaged Wiring or Connectors: Wiring or connectors in the circuit may be damaged, causing a high voltage reading.
- Stuck Intake Manifold Runner Valves: The intake manifold runner valves may be stuck in a specific position, causing the sensor to detect a high voltage signal.
- Vacuum Leaks: Vacuum leaks in the intake manifold system can also trigger the P2017 code by affecting the sensor's readings.
- ECM Malfunction: In rare cases, a malfunctioning Engine Control Module (ECM) could be causing the high voltage signal in the circuit.
Symptoms of P2017 KIA
- Check Engine Light: The most common symptom associated with the P2017 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Rough Idling: The engine may experience rough idling or fluctuations in RPM while at a standstill.
- Decreased Fuel Efficiency: A malfunctioning intake manifold runner position sensor can lead to decreased fuel efficiency due to improper air/fuel ratios.
- Engine Misfires: The engine may experience misfires, particularly during acceleration or under load.
- Lack of Power: The vehicle may exhibit a lack of power or reduced performance, especially during acceleration.
How to Fix P2017 KIA
- Diagnose the Issue: Use a diagnostic scan tool to retrieve the fault code and perform further testing to pinpoint the exact cause of the P2017 code.
- Inspect Wiring and Connectors: Check the wiring and connectors in the circuit for any damage or corrosion and repair or replace as needed.
- Test Intake Manifold Runner Position Sensor/Switch: Test the sensor for proper operation and replace if found to be faulty.
- Check Intake Manifold Runner Valves: Inspect the intake manifold runner valves for any obstructions or sticking and clean or replace as necessary.
- Clear Code and Test Drive: After completing the repairs, clear the fault code from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2017 KIA
The typical repair costs for addressing the P2017 code on a KIA vehicle can vary depending on the specific cause of the issue and the parts/labour required for repair. In general, the cost of replacing a faulty Intake Manifold Runner Position Sensor/Switch can range from $150 to $300, while addressing wiring/connectors or intake manifold runner valves may add to the total cost. The total repair cost, including parts and labour, could range from $200 to $600 or more. It's important to note that diagnosis time and labour rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P2017 KIA code?
Need more information on how to fix the P2017 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2017 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2017 KIA Code
1. What does the OBDII code P2017 mean for a Kia vehicle?
P2017 indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit High on Bank 1, meaning the sensor is detecting a position outside the expected range.
2. What are the common symptoms of a P2017 code in a Kia?
Symptoms may include an illuminated check engine light, reduced engine performance, poor fuel efficiency, or hesitation during acceleration.
3. What causes the P2017 code to appear on a Kia?
Common causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, carbon buildup in the intake manifold, or a malfunctioning intake manifold runner control valve.
4. Can I drive my Kia with a P2017 code?
While it may be possible to drive, it is not recommended as the issue could lead to reduced performance and potentially cause further engine damage if left unresolved.
5. How do I diagnose the P2017 code on a Kia?
Diagnosis typically involves using an OBDII scanner to confirm the code, inspecting the intake manifold runner sensor and wiring for damage, and checking for carbon buildup in the intake manifold.
6. How much does it cost to fix a P2017 code on a Kia?
Repair costs vary but can range from $100 to $500, depending on whether the issue is a sensor replacement, wiring repair, or intake manifold cleaning.
7. Can a dirty intake manifold cause the P2017 code?
Yes, carbon buildup in the intake manifold can restrict the movement of the runners, triggering the P2017 code.
8. What tools are needed to fix the P2017 code on a Kia?
You may need an OBDII scanner, a multimeter for electrical testing, basic hand tools, and possibly intake manifold cleaning supplies.
9. How can I prevent the P2017 code from recurring on a Kia?
Regular maintenance, such as cleaning the intake manifold and ensuring the sensor and wiring are in good condition, can help prevent this code.
10. Does the P2017 code on a Kia always indicate a faulty sensor?
Not necessarily. The code could also result from wiring issues, actuator problems, or mechanical restrictions in the intake manifold.
Discuss the causes and fixes for P2017 KIA OBDII Code
Code P2017 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.