P2016 Dodge Code - Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
Quick Answer
The P2016 diagnostic trouble code for Dodge vehicles indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1. Common causes include Damaged wiring or connectors, Faulty Intake Manifold Runner Position Sensor/Switch, Vacuum leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2016 Dodge indicates Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1.
- Common causes
- Common causes include Damaged wiring or connectors, Faulty Intake Manifold Runner Position Sensor/Switch, Vacuum leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2016 Dodge Description
The P2016 diagnostic trouble code for Dodge vehicles indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1. This sensor is responsible for monitoring the position of the intake manifold runner, which helps control the airflow into the engine. The intake manifold runner is a component that directs air into the engine's combustion chamber, and its position can be adjusted to optimize performance at different engine speeds.
Common Causes of P2016 Dodge
- Damaged wiring or connectors
- Faulty Intake Manifold Runner Position Sensor/Switch
- Vacuum leaks
- Intake manifold issues
- Electrical problems
Symptoms of P2016 Dodge
- Reduced engine power
- Poor acceleration
- Rough idling
- Stalling
- Check Engine Light illuminated
How to Fix P2016 Dodge
- Perform a comprehensive diagnostic to identify the exact cause of the P2016 code.
- Inspect the wiring and connectors for any damage or corrosion. Repair or replace as needed.
- Test the Intake Manifold Runner Position Sensor/Switch and replace if faulty.
- Check for vacuum leaks and repair any damaged hoses or components.
- Inspect the intake manifold for any issues and address as necessary.
Cost to Fix P2016 Dodge
The typical repair cost for addressing the P2016 code on a Dodge vehicle can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate. Labor rates usually range between $80 and $150 per hour, with rates potentially higher in metropolitan areas or at dealerships, while independent shops may charge less.
Tech Notes for P2016 Dodge
2009 Dodge Ram Truck (1500)
2009 Dodge Ram Trucks (1500/2500)
2009 Dodge Cab Chassis (3500)
Dodge Factory Service Bulletin OBDII Code P2016
Need more information about the P2016 Dodge code?
Need more information on how to fix the P2016 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2016 Dodge code diagnosed by a professional: Find a repair shop in your area
Information for Specific Dodge Models
- P2016 2006 Dodge Charger — Short Runner Valve Position Sensor/Switch Circuit Low
- P2016 2007 Dodge Charger — Short Runner Valve Position Sensor/Switch Circuit Low
- P2016 2008 Dodge Charger — Short Runner Valve Position Sensor/Switch Circuit Low
- P2016 2009 Dodge Charger — Short Runner Valve Position Sensor/Switch Circuit Low
- P2016 2010 Dodge Charger — Short Runner Valve Position Sensor/Switch Circuit Low
Frequently Asked Questions about P2016 Dodge Code
What does the OBDII code P2016 mean on a Dodge vehicle?
P2016 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Low on Bank 1, often caused by a malfunction in the intake manifold runner control system.
What are the common symptoms of the P2016 code on a Dodge?
Symptoms may include an illuminated check engine light, reduced engine performance, poor fuel economy, and hesitation or rough idling.
What causes the P2016 code to appear on a Dodge?
Common causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, or a stuck intake manifold runner valve.
Can I drive my Dodge with the P2016 code?
While it may be possible to drive, it’s not recommended as the issue can lead to reduced performance and potentially cause further engine damage over time.
How do I diagnose the P2016 code on a Dodge?
Start by scanning for additional codes, inspecting the intake manifold runner position sensor and its wiring, and checking if the runner valves are stuck or damaged.
What tools are needed to fix the P2016 code on a Dodge?
You’ll typically need an OBDII scanner, a multimeter for testing wiring, and basic hand tools to inspect or replace components.
How much does it cost to fix the P2016 code on a Dodge?
Repair costs vary, but replacing the intake manifold runner position sensor typically ranges from $150 to $400, including parts and labor.
Is the P2016 code covered under warranty for Dodge vehicles?
It may be covered under the powertrain warranty if your vehicle is still within the warranty period. Check with your dealer for specifics.
Can cleaning the intake manifold runner valve fix the P2016 code?
In some cases, cleaning a stuck intake manifold runner valve may resolve the issue, but if components are damaged, they will need to be replaced.
How can I prevent the P2016 code from occurring on my Dodge?
Regular maintenance, such as cleaning the intake manifold and inspecting wiring, can help prevent issues with the intake manifold runner system.
Discuss the causes and fixes for P2016 Dodge OBDII Code
Code P2016 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.