Engine-Codes.com
Engine-Codes – Ford – P2014 Ford

P2014 Ford Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

Quick Answer

The P2014 Ford code indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1. Common causes include Faulty sensor/switch: The intake manifold runner position sensor/switch may be defective and not sending accurate signals to the ECM, Wiring or connector issues: Damage to the wiring or connectors in the sensor circuit can interrupt communication between the sensor and the ECM, ECM malfunction: A malfunctioning ECM can also cause issues with the intake manifold runner position sensor/switch circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2014 Ford indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
Common causes
Common causes include Faulty sensor/switch: The intake manifold runner position sensor/switch may be defective and not sending accurate signals to the ECM, Wiring or connector issues: Damage to the wiring or connectors in the sensor circuit can interrupt communication between the sensor and the ECM, ECM malfunction: A malfunctioning ECM can also cause issues with the intake manifold runner position sensor/switch circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 06, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2014 Ford Description

The P2014 Ford code indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1. The intake manifold runner control is a system that controls the amount of air entering the engine by adjusting the length of the intake runners. This helps optimize engine performance and efficiency at different RPMs. The position sensor/switch is responsible for detecting the position of the intake manifold runners and sending this information to the engine control module (ECM) for proper adjustment.

OBDII Code P2014 Ford - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1
P2014 Ford Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

Common Causes of P2014 Ford

  1. Faulty sensor/switch: The intake manifold runner position sensor/switch may be defective and not sending accurate signals to the ECM.
  2. Wiring or connector issues: Damage to the wiring or connectors in the sensor circuit can interrupt communication between the sensor and the ECM.
  3. ECM malfunction: A malfunctioning ECM can also cause issues with the intake manifold runner position sensor/switch circuit.
  4. Mechanical issue: The intake manifold runners themselves may be stuck or damaged, preventing proper adjustment.

Symptoms of P2014 Ford

  1. Rough idle: The engine may run erratically or have a rough idle when the intake manifold runner position sensor/switch circuit is malfunctioning.
  2. Hesitation during acceleration: The vehicle may hesitate or struggle to accelerate smoothly when the sensor is not functioning correctly.
  3. Reduced power output: The engine may lack power and feel sluggish, especially at higher RPMs.
  4. Check Engine Light: The Check Engine Light may illuminate on the dashboard to indicate a problem with the intake manifold runner position sensor/switch circuit.
  5. Poor fuel efficiency: The vehicle may experience decreased fuel efficiency due to improper air intake adjustment.

How to Fix P2014 Ford

  1. Diagnose the problem: Use a diagnostic scanner to retrieve the fault code and perform further testing to pinpoint the exact cause of the issue.
  2. Inspect sensor/switch: Check the intake manifold runner position sensor/switch for any visible damage or signs of malfunction.
  3. Check wiring and connectors: Inspect the wiring and connectors in the sensor circuit for any damage, corrosion, or loose connections.
  4. Replace sensor/switch: If the sensor/switch is faulty, replace it with a new one following the manufacturer's guidelines.
  5. Clear codes and test: Clear the fault codes stored in the ECM and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P2014 Ford

The typical repair costs for addressing a P2014 Ford code can range from $150 to $400, depending on the specific cause of the issue and the cost of the parts involved. This estimate includes the cost of the intake manifold runner position sensor/switch, any necessary wiring or connectors, and labor charges. It's important to note that repair costs can vary based on factors such as location, vehicle make and model, and the rates of the auto repair shop. Additionally, diagnosis time and labor rates can impact the overall cost of the repair. It's recommended to consult with a qualified mechanic for a more accurate estimate based on your specific situation.

Need more information about the P2014 Ford code?

Need more information on how to fix the P2014 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2014 Ford code diagnosed by a professional: Find a repair shop in your area

Information for Specific Ford Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2014 Ford Code

No Frequently Asked Questions about P2014 Ford Code found.

Discuss the causes and fixes for P2014 Ford OBDII Code

Submit a New Comment

Code P2014 Ford comments

No comments found for this page.