P2014 Chrysler Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1
Quick Answer
The P2014 Chrysler code indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1 of the vehicle's engine. Common causes include Faulty Intake Manifold Runner Position Sensor: The sensor itself may be defective or damaged, causing it to send incorrect signals to the ECM, Wiring Issues: Damage to the wiring harness or connectors connected to the sensor can disrupt the signal transmission and trigger the code, Intake Manifold Runner Control Module Failure: The control module responsible for managing the intake manifold runner may be faulty, leading to the code being triggered. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2014 Chrysler indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor: The sensor itself may be defective or damaged, causing it to send incorrect signals to the ECM, Wiring Issues: Damage to the wiring harness or connectors connected to the sensor can disrupt the signal transmission and trigger the code, Intake Manifold Runner Control Module Failure: The control module responsible for managing the intake manifold runner may be faulty, leading to the code being triggered.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2014 Chrysler Description
The P2014 Chrysler code indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1 of the vehicle's engine. The intake manifold runner is a vital component in the engine's air intake system, responsible for controlling the airflow to the engine cylinders. The position sensor/switch circuit is designed to monitor the position of the intake manifold runner and ensure that it is functioning correctly.
Common Causes of P2014 Chrysler
- Faulty Intake Manifold Runner Position Sensor: The sensor itself may be defective or damaged, causing it to send incorrect signals to the ECM.
- Wiring Issues: Damage to the wiring harness or connectors connected to the sensor can disrupt the signal transmission and trigger the code.
- Intake Manifold Runner Control Module Failure: The control module responsible for managing the intake manifold runner may be faulty, leading to the code being triggered.
- Vacuum Leaks: Any leaks in the intake system can affect the sensor's ability to accurately monitor the runner position.
- Carbon Build-up: Accumulation of carbon deposits in the intake manifold can obstruct the movement of the runner, leading to sensor inaccuracies and triggering the code.
Symptoms of P2014 Chrysler
- Check Engine Light: The most common symptom associated with the P2014 code is the illumination of the check engine light on the dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in power and acceleration due to the improper airflow caused by the malfunctioning sensor.
- Rough Idle: The engine may idle roughly or inconsistently, indicating an issue with the intake manifold runner position sensor/switch circuit.
- Decreased Fuel Efficiency: A malfunction in this system can lead to poor fuel economy, as the engine may not be receiving the correct air-fuel mixture for combustion.
- Engine Stalling: In severe cases, the engine may stall or have difficulty starting, especially at lower speeds or when idling.
How to Fix P2014 Chrysler
- Diagnostic Scan: Begin by using an OBD-II scanner to retrieve the specific fault code and confirm the issue is related to the intake manifold runner position sensor/switch circuit.
- Inspect Sensor and Wiring: Check the sensor for any visible damage or signs of wear, and inspect the wiring and connectors for any breaks, frays, or corrosion.
- Replace Sensor or Repair Wiring: If the sensor is faulty, replace it with a new one, ensuring it is properly calibrated and installed. Repair any damaged wiring or connectors to restore proper functionality.
- Clear Codes and Test Drive: After completing the repair, clear the fault codes and test drive the vehicle to ensure the issue has been resolved and the check engine light does not reappear.
- Perform Relearn Procedure: Some vehicles may require a relearn procedure to recalibrate the intake manifold runner position sensor after replacement.
Cost to Fix P2014 Chrysler
The cost of repairing the P2014 Chrysler code can vary depending on the specific vehicle make and model, as well as the extent of the issue. Generally, the replacement of the intake manifold runner position sensor can range from $150 to $300, including parts and labor. However, if additional components need to be replaced or if there are wiring issues that require more extensive repairs, the cost can increase.
Need more information about the P2014 Chrysler code?
Need more information on how to fix the P2014 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2014 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2014 Chrysler Code
No Frequently Asked Questions about P2014 Chrysler Code found.
Discuss the causes and fixes for P2014 Chrysler OBDII Code
Code P2014 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.