P2008 2009 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1
Quick Answer
The P2008 code for a 2009 Ford Fusion relates to the Intake Manifold Runner Control Circuit/Open Bank 1. Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Damaged wiring or connectors in the circuit, Failed IMRC solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2008 2009 Ford Fusion indicates Intake Manifold Runner Control Circuit/Open Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Damaged wiring or connectors in the circuit, Failed IMRC solenoid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2008 2009 Ford Fusion Description
The P2008 code for a 2009 Ford Fusion relates to the Intake Manifold Runner Control Circuit/Open Bank 1. This code indicates that there is an issue with the intake manifold runner control system in the engine. The intake manifold runner control system is responsible for adjusting the length of the intake manifold runners to optimize engine performance at different RPMs. Bank 1 refers to the side of the engine where cylinder 1 is located.
Common Causes of P2008 2009 Ford Fusion
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Damaged wiring or connectors in the circuit
- Failed IMRC solenoid
- Issue with the intake manifold
- ECM (Engine Control Module) failure
Symptoms of P2008 2009 Ford Fusion
- Reduced engine performance or power
- Rough idle or stalling
- Decreased fuel efficiency
- Check Engine Light illuminated on the dashboard
- Engine misfires or hesitation during acceleration
How to Fix P2008 2009 Ford Fusion
- Begin by diagnosing the specific cause of the P2008 code using a scan tool to pinpoint the issue.
- Inspect the wiring and connectors in the intake manifold runner control circuit for any damage or breaks.
- Test the IMRC actuator and solenoid for proper operation and replace if necessary.
- Check the intake manifold for any signs of damage or clogging that could be affecting performance.
- Clear the code after repairing the issue and test drive the vehicle to ensure the problem has been resolved.
Cost to Fix P2008 2009 Ford Fusion
The typical repair costs for addressing a P2008 code on a 2009 Ford Fusion can range from $200 to $600, including parts and labor. However, it's important to note that actual costs can vary depending on the specific diagnosis time and labor rates at auto repair shops. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer lower prices. It's recommended to obtain quotes from local shops for a more accurate estimate.
Need more information about the P2008 2009 Ford Fusion code?
Need more information on how to fix the P2008 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2008 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2008 2009 Ford Fusion Code
1. What does the OBDII code P2008 mean on a 2009 Ford Fusion?
P2008 indicates an issue with the Intake Manifold Runner Control (IMRC) Circuit/Open for Bank 1, meaning the system is unable to properly control the airflow through the intake manifold.
2. What are the symptoms of a P2008 code on a 2009 Ford Fusion?
Common symptoms include reduced engine performance, rough idling, decreased fuel efficiency, and the Check Engine Light turning on.
3. What causes the P2008 code in a 2009 Ford Fusion?
Potential causes include a faulty IMRC solenoid, damaged wiring or connectors in the IMRC circuit, a malfunctioning intake manifold runner, or a failed PCM (Powertrain Control Module).
4. Can I drive my 2009 Ford Fusion with a P2008 code?
While the vehicle may still be drivable, it could experience reduced performance and efficiency. Prolonged driving without addressing the issue may lead to further engine damage.
5. How do I diagnose a P2008 code on a 2009 Ford Fusion?
Start by inspecting the IMRC solenoid, wiring, and connectors for damage or disconnection. Use a multimeter to check for proper voltage and continuity in the circuit, and perform a scan tool test to confirm IMRC operation.
6. How do I fix the P2008 code on my 2009 Ford Fusion?
Repairs may include replacing the IMRC solenoid, repairing or replacing damaged wiring or connectors, cleaning the intake manifold runners, or reprogramming/replacing the PCM if necessary.
7. How much does it cost to repair a P2008 code on a 2009 Ford Fusion?
The cost can vary depending on the issue. Replacing the IMRC solenoid typically costs $100–$300, while wiring repairs or PCM replacement could cost more.
8. Can a dirty intake manifold cause a P2008 code?
Yes, carbon buildup in the intake manifold can cause the IMRC to stick or malfunction, potentially triggering the P2008 code.
9. Does the P2008 code affect emissions on a 2009 Ford Fusion?
Yes, a malfunctioning IMRC system can affect the air-fuel mixture, potentially increasing emissions and causing the vehicle to fail an emissions test.
10. Is a P2008 code specific to Bank 1 on a 2009 Ford Fusion?
Yes, the code specifically relates to the IMRC circuit for Bank 1, which is the side of the engine containing cylinder 1.
Discuss the causes and fixes for P2008 2009 Ford Fusion OBDII Code
Code P2008 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.