P2007 Ford Code - Intake Manifold Runner Control Stuck Closed Bank 2
Quick Answer
The P2007 Ford code indicates that the Intake Manifold Runner Control (IMRC) is stuck closed on Bank 2. Common causes include Faulty IMRC actuator, Defective IMRC control module, Vacuum leak. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2007 Ford indicates Intake Manifold Runner Control Stuck Closed Bank 2.
- Common causes
- Common causes include Faulty IMRC actuator, Defective IMRC control module, Vacuum leak.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2007 Ford Description
The P2007 Ford code indicates that the Intake Manifold Runner Control (IMRC) is stuck closed on Bank 2. The IMRC system is designed to optimize the airflow into the engine by adjusting the length of the intake manifold runners. In this case, Bank 2 refers to the side of the engine where the issue is occurring. When the IMRC is stuck closed, it restricts the airflow and can lead to poor engine performance, reduced fuel efficiency, and increased emissions.
Common Causes of P2007 Ford
- Faulty IMRC actuator
- Defective IMRC control module
- Vacuum leak
- Intake manifold issues
- Wiring or electrical problems
Symptoms of P2007 Ford
- Reduced engine power
- Rough idle
- Hesitation or stumbling during acceleration
- Stalling
- Illumination of the Check Engine Light
How to Fix P2007 Ford
- Begin by diagnosing the specific cause of the issue using a scan tool to retrieve the trouble codes and performing a visual inspection of the IMRC system.
- Test the IMRC actuator and control module for proper operation and replace them if necessary.
- Check for vacuum leaks in the intake manifold system and repair any leaks found.
- Inspect the intake manifold for any damage or blockages that may be causing the IMRC to be stuck closed.
- Clear the trouble codes, reset the engine control module, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2007 Ford
The typical repair costs for addressing the P2007 Ford code can range from $200 to $600, including parts and labor. However, the actual cost may vary depending on the specific cause of the issue, the extent of the repair needed, and the labor rates at the auto repair shop. It's advisable to consult with a qualified mechanic or service center to get an accurate estimate based on your vehicle's make and model. Keep in mind that diagnostics and labor rates can fluctuate based on location and other factors.
Tech Notes for P2007 Ford
2005-2006 Ford Mustang
2006 Ford Explorer
2007 Ford Explorer Sport Trac
Ford Factory Service Bulletin OBDII Code P2007
2011 Ford Ranger w/2.3L
Ford Windstar, Ford Freestar
2006 Ford F150
User Submitted Video
Need more information about the P2007 Ford code?
Need more information on how to fix the P2007 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2007 Ford code diagnosed by a professional: Find a repair shop in your area
Information for Specific Ford Models
- P2007 2006 Ford Fusion — Intake Manifold Runner Control Stuck Closed Bank 2
- P2007 2007 Ford Fusion — Intake Manifold Runner Control Stuck Closed Bank 2
- P2007 2008 Ford Fusion — Intake Manifold Runner Control Stuck Closed Bank 2
- P2007 2009 Ford Fusion — Intake Manifold Runner Control Stuck Closed Bank 2
- P2007 2010 Ford Fusion — Intake Manifold Runner Control Stuck Closed Bank 2
- P2007 2011 Ford Fusion — Intake Manifold Runner Control Stuck Closed Bank 2
- P2007 2012 Ford Fusion — Intake Manifold Runner Control Stuck Closed Bank 2
Frequently Asked Questions about P2007 Ford Code
1. What are the common symptoms of OBDII code P2007 Ford (Intake Manifold Runner Control Stuck Closed Bank 2)?
- Common symptoms include a decrease in engine performance, rough idling, and a reduction in fuel efficiency.
2. What causes the Intake Manifold Runner Control to get stuck closed on Bank 2?
- The most common causes are a faulty intake manifold runner control actuator, carbon buildup in the intake manifold, or a stuck intake manifold runner flap.
3. How can I diagnose the issue related to OBDII code P2007 on my Ford vehicle?
- Diagnosis involves using a scan tool to read the code, visually inspecting the intake manifold components, and testing the intake manifold runner control actuator.
4. Can I continue driving my vehicle with the intake manifold runner control stuck closed?
- It is not recommended to continue driving with this issue as it can lead to further engine damage and decreased performance.
5. What is the typical repair process for fixing OBDII code P2007 on a Ford vehicle?
- The repair process usually involves cleaning the intake manifold, replacing the intake manifold runner control actuator, or repairing/replacing the intake manifold runner flap.
6. Are there any preventative maintenance measures to avoid encountering P2007 code in the future?
- Regularly cleaning the intake manifold and using high-quality fuel can help prevent carbon buildup and potential issues with the intake manifold runner control.
7. How long does it take to repair the intake manifold runner control stuck closed issue?
- The repair time can vary depending on the extent of the issue and the availability of parts, but it typically takes a few hours to complete the repair.
8. Will resetting the OBDII code P2007 clear the issue permanently?
- Resetting the code may temporarily clear the issue, but if the root cause is not addressed, the code is likely to reappear.
9. Can a DIY enthusiast fix the intake manifold runner control stuck closed issue at home?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address this issue at home, but it is recommended to consult a professional mechanic for proper diagnosis and repair.
10. Is OBDII code P2007 specific to Ford vehicles, or can it occur in other makes and models?
- While the exact code may vary, similar intake manifold runner control issues can occur in vehicles from other manufacturers as well.
Discuss the causes and fixes for P2007 Ford OBDII Code
-
Its going into limp mode sometimes it works sometimes it doesnt it seems like the more it sets at idle the more it does it it will go into limp mode right when i press on the gas or the rpms will go real high then they will drop and BAM car goes into limp mode could this be my probkem the actuatir the rods on it seem fine
-
Let me check if I can find more information, what make, model and year is your vehicle?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.