P2006 2011 Ford Fusion Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The P2006 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates that the Intake Manifold Runner Control (IMRC) is stuck closed on Bank 1. Common causes include Carbon buildup in the IMRC system, Faulty IMRC actuator or control module, Wiring or electrical issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2011 Ford Fusion indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Carbon buildup in the IMRC system, Faulty IMRC actuator or control module, Wiring or electrical issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2006 2011 Ford Fusion Description
The P2006 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates that the Intake Manifold Runner Control (IMRC) is stuck closed on Bank 1. The IMRC system is responsible for adjusting the length of the intake manifold runners to optimize airflow into the engine, improving performance and fuel efficiency. When the IMRC is stuck closed, it restricts airflow, leading to decreased engine performance, reduced fuel efficiency, and potential drivability issues.
Common Causes of P2006 2011 Ford Fusion
- Carbon buildup in the IMRC system
- Faulty IMRC actuator or control module
- Wiring or electrical issues
- Vacuum leaks in the intake manifold
- Mechanical obstruction in the intake manifold runners
Symptoms of P2006 2011 Ford Fusion
- Rough idling or stalling
- Reduced engine power
- Poor acceleration
- Decreased fuel efficiency
- Illumination of the check engine light
How to Fix P2006 2011 Ford Fusion
- Diagnose the issue using a scan tool to confirm the P2006 code and inspect the IMRC system for any visible damage or obstructions.
- Clean the intake manifold runners and IMRC components to remove any carbon buildup or debris that may be causing the obstruction.
- Test the IMRC actuator and control module for proper operation and replace any faulty components as needed.
- Check for and repair any wiring or electrical issues that may be affecting the IMRC system's functionality.
- Clear the DTC and perform a test drive to verify that the issue has been resolved and that the IMRC system is functioning correctly.
Cost to Fix P2006 2011 Ford Fusion
The cost of repairing a P2006 code on a 2011 Ford Fusion can vary depending on the specific cause of the issue and the labor rates in your area. On average, the repair for a stuck closed IMRC can range from $200 to $500, including parts and labor. It's recommended to consult with a trusted mechanic or dealership to get an accurate estimate based on your vehicle's condition and location. Keep in mind that diagnostic time and labor rates can impact the final cost, so it's essential to factor in these variables when budgeting for the repair.
Need more information about the P2006 2011 Ford Fusion code?
Need more information on how to fix the P2006 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2011 Ford Fusion Code
1. What does the OBDII code P2006 mean on a 2011 Ford Fusion?
The P2006 code indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position, which can affect engine performance and efficiency.
2. What are the symptoms of code P2006 in a 2011 Ford Fusion?
Common symptoms include reduced engine power, poor fuel economy, rough idling, and a check engine light.
3. What causes the P2006 code to appear in a 2011 Ford Fusion?
Possible causes include a faulty IMRC actuator, carbon buildup in the intake manifold, a broken IMRC control linkage, or an electrical issue such as damaged wiring or a bad sensor.
4. Can I drive my 2011 Ford Fusion with a P2006 code?
Driving with a P2006 code is possible but not recommended, as it can lead to reduced performance, increased emissions, and potential engine damage over time if not addressed.
5. How is the P2006 code diagnosed?
A mechanic will typically use a scan tool to confirm the code, inspect the IMRC actuator and linkage, check for carbon buildup, and test the electrical components in the IMRC system.
6. How can I fix the P2006 code on my 2011 Ford Fusion?
Repairs may involve cleaning or replacing the IMRC actuator, clearing carbon buildup from the intake manifold, repairing the IMRC linkage, or fixing any damaged wiring or connectors.
7. How much does it cost to fix a P2006 code on a 2011 Ford Fusion?
The cost varies depending on the cause, but repairs typically range from $150 to $600, with actuator replacement being on the higher end.
8. Can cleaning the intake manifold fix the P2006 code?
Yes, if the issue is caused by carbon buildup, cleaning the intake manifold may resolve the problem.
9. What tools are needed to repair the IMRC system for a P2006 code?
Depending on the repair, you may need a scan tool, basic hand tools, cleaning supplies for carbon buildup, and possibly a replacement IMRC actuator or linkage.
10. Is the P2006 code specific to Bank 1 on the 2011 Ford Fusion?
Yes, the code specifically refers to the IMRC system on Bank 1, which is the side of the engine containing cylinder 1.
Discuss the causes and fixes for P2006 2011 Ford Fusion OBDII Code
Code P2006 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.