P2006 2007 Ford Fusion Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The P2006 diagnostic trouble code for a 2007 Ford Fusion specifically indicates that the Intake Manifold Runner Control (IMRC) is stuck closed on Bank 1. Common causes include Faulty IMRC actuator, Stuck IMRC valve, Wiring issues in the IMRC system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2007 Ford Fusion indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty IMRC actuator, Stuck IMRC valve, Wiring issues in the IMRC system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2006 2007 Ford Fusion Description
The P2006 diagnostic trouble code for a 2007 Ford Fusion specifically indicates that the Intake Manifold Runner Control (IMRC) is stuck closed on Bank 1. The IMRC system is designed to vary the length of the intake manifold runners to optimize airflow and increase engine performance at different RPM ranges. When the IMRC is stuck closed on Bank 1, it means that the intake manifold runners are not able to adjust properly, resulting in restricted airflow to the engine.
Common Causes of P2006 2007 Ford Fusion
- Faulty IMRC actuator
- Stuck IMRC valve
- Wiring issues in the IMRC system
- Vacuum leak in the IMRC system
Symptoms of P2006 2007 Ford Fusion
- Reduced engine power
- Poor fuel efficiency
- Rough idling
- Hesitation during acceleration
- Engine stalling or misfiring
How to Fix P2006 2007 Ford Fusion
- Diagnose the issue using a scan tool to confirm the P2006 code and inspect the IMRC system for any visible damage or leaks.
- Test the IMRC actuator and valve for proper operation and replace if necessary.
- Check the wiring harness for any damaged or corroded wires and repair as needed.
- Inspect the vacuum lines connected to the IMRC system for leaks or blockages and address any issues found.
- Clear the trouble code from the vehicle's computer after completing the repair and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2006 2007 Ford Fusion
The typical repair costs for addressing a P2006 code on a 2007 Ford Fusion can vary depending on the specific cause of the issue and the labor rates at the repair shop. On average, the cost of parts for this repair can range from $200 to $500, with additional labor costs of $150 to $300. Keep in mind that these estimates are general guidelines and actual costs may vary based on the location, vehicle make and model, and the extent of the repair needed. It is recommended to obtain a detailed quote from a trusted auto repair shop before proceeding with the repair.
Need more information about the P2006 2007 Ford Fusion code?
Need more information on how to fix the P2006 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2007 Ford Fusion Code
1. What does the OBDII code P2006 mean for a 2007 Ford Fusion?
The P2006 code indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position, which can affect engine airflow and performance.
2. What are the common symptoms of a P2006 code in a 2007 Ford Fusion?
Symptoms may include reduced engine performance, poor fuel economy, rough idling, lack of power, and the Check Engine Light being illuminated.
3. What causes the P2006 code on a 2007 Ford Fusion?
Common causes include a malfunctioning IMRC actuator, carbon buildup on the intake manifold runner, a broken or disconnected linkage, or a wiring/connector issue in the IMRC system.
4. Can you drive a 2007 Ford Fusion with the P2006 code?
While the car may still be drivable, it is not recommended to ignore the issue because it can lead to reduced performance, increased emissions, and potential damage to the engine over time.
5. How is the P2006 code diagnosed on a 2007 Ford Fusion?
A mechanic will typically inspect the IMRC system's actuator, linkage, and wiring; check for carbon buildup; and use a scan tool to monitor IMRC operation and confirm the fault.
6. How can you fix the P2006 code on a 2007 Ford Fusion?
Possible fixes include cleaning carbon deposits from the intake manifold, repairing or replacing the IMRC actuator, fixing broken linkages, or addressing wiring/connector issues.
7. How much does it cost to repair the P2006 code on a 2007 Ford Fusion?
Repair costs can vary widely depending on the exact issue but typically range from $150 to $600, including parts and labor.
8. What happens if the P2006 code is not resolved?
Ignoring the P2006 code can lead to poor engine performance, increased emissions, and potential long-term damage to the intake or engine components.
9. Does the P2006 code indicate a serious problem?
While not immediately critical, it is important to address this code promptly to prevent further issues with engine efficiency and performance.
10. Can a dirty air filter cause the P2006 code on a 2007 Ford Fusion?
No, a dirty air filter is not a typical cause of the P2006 code, as it specifically relates to the Intake Manifold Runner Control system.
Discuss the causes and fixes for P2006 2007 Ford Fusion OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.