P1E35 Acura Code - Brake Pedal Feel Simulator Cut Valve Incorrect Operation
Quick Answer
The P1E35 diagnostic trouble code for Acura vehicles indicates an issue with the Brake Pedal Feel Simulator Cut Valve Incorrect Operation. Common causes include Faulty brake pedal feel simulator cut valve, Wiring or electrical issues, Brake system fluid contamination. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1E35 Acura indicates Brake Pedal Feel Simulator Cut Valve Incorrect Operation.
- Common causes
- Common causes include Faulty brake pedal feel simulator cut valve, Wiring or electrical issues, Brake system fluid contamination.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1E35 Acura Description
The P1E35 diagnostic trouble code for Acura vehicles indicates an issue with the Brake Pedal Feel Simulator Cut Valve Incorrect Operation. This code typically points to a malfunction in the brake system that affects the brake pedal feel simulator cut valve. The brake pedal feel simulator is a component that helps simulate the feel of a traditional hydraulic brake system in vehicles equipped with brake-by-wire technology. When the cut valve is not operating correctly, it can lead to abnormal brake pedal feel, potentially affecting the driver's ability to modulate braking force effectively.
Common Causes of P1E35 Acura
- Faulty brake pedal feel simulator cut valve
- Wiring or electrical issues
- Brake system fluid contamination
- Brake system component failure
- Software or calibration issues
Symptoms of P1E35 Acura
- Inconsistent brake pedal feel
- Spongy or overly firm brake pedal
- Lack of response when applying brakes
- Illumination of ABS or brake system warning lights
How to Fix P1E35 Acura
- Diagnose the issue using a diagnostic scanner to confirm the P1E35 code and identify the specific cause of the problem.
- Inspect the brake pedal feel simulator cut valve for proper operation and check for any signs of damage or malfunction.
- Test the wiring and electrical connections related to the brake system to ensure they are secure and functioning correctly.
- Replace the faulty brake pedal feel simulator cut valve if necessary, following manufacturer guidelines and using OEM parts.
- Clear the diagnostic trouble codes from the vehicle's computer and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P1E35 Acura
The typical repair costs for addressing the P1E35 code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, replacing a faulty brake pedal feel simulator cut valve and addressing related wiring or electrical issues can range from $200 to $500, including parts and labor. However, it is essential to note that the actual cost may vary based on factors such as the vehicle make and model, location, and labor rates at the auto repair shop. It is advisable to consult with a professional mechanic or dealership for a more accurate estimate based on the specific circumstances. Keep in mind that diagnostic time and labor rates at auto repair shops typically range from $80 to $150 per hour.
Need more information about the P1E35 Acura code?
Need more information on how to fix the P1E35 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1E35 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1E35 Acura Code
What does OBDII code P1E35 mean for an Acura?
Code P1E35 indicates an issue with the Brake Pedal Feel Simulator Cut Valve, specifically incorrect operation detected by the vehicle's control system.
What are the symptoms of code P1E35 on an Acura?
Common symptoms include inconsistent brake pedal feel, reduced braking performance, or activation of the check engine or brake system warning lights.
What causes code P1E35 on an Acura?
Causes may include a malfunctioning brake pedal feel simulator cut valve, electrical issues with the valve’s circuit, or a failure in the brake system control module.
Can code P1E35 affect vehicle safety?
Yes, this code impacts the brake system, potentially leading to reduced braking effectiveness and compromised safety.
How is code P1E35 diagnosed?
Technicians typically use a diagnostic scanner to retrieve the code, inspect the brake pedal feel simulator cut valve, and check for wiring or control module issues.
Can I drive my Acura with code P1E35 active?
It’s not recommended, as braking performance may be compromised, which can pose a safety risk.
How is code P1E35 fixed on an Acura?
Repairs may include replacing the brake pedal feel simulator cut valve, repairing or replacing damaged wiring, or reprogramming the brake system control module.
How much does it cost to fix code P1E35 on an Acura?
Repair costs vary but typically range from $200 to $600, depending on the exact cause and labor rates.
Will resetting the code fix P1E35?
Simply clearing the code without addressing the underlying issue will not resolve the problem, and the code is likely to return.
Is code P1E35 common in Acura vehicles?
This code is less common but may occur in models equipped with advanced braking systems that use a brake pedal feel simulator.
Discuss the causes and fixes for P1E35 Acura OBDII Code
Code P1E35 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.