Engine-Codes.com
Engine-Codes – Acura – P1E27 Acura

P1E27 Acura Code - Brake Fluid Pressure Sensor PU Circuit High Voltage

Quick Answer

The P1E27 diagnostic trouble code (DTC) for Acura vehicles refers to an issue with the Brake Fluid Pressure Sensor PU Circuit High Voltage. Common causes include Faulty brake fluid pressure sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the brake fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1E27 Acura indicates Brake Fluid Pressure Sensor PU Circuit High Voltage.
Common causes
Common causes include Faulty brake fluid pressure sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the brake fluid.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1E27 Acura Description

The P1E27 diagnostic trouble code (DTC) for Acura vehicles refers to an issue with the Brake Fluid Pressure Sensor PU Circuit High Voltage. This code indicates that the brake fluid pressure sensor, which is responsible for monitoring the hydraulic pressure in the braking system, is detecting a higher than normal voltage. The brake fluid pressure sensor plays a crucial role in ensuring the proper functioning of the vehicle's braking system, as it helps regulate the hydraulic pressure applied to the brakes during operation.

OBDII Code P1E27 Acura - Brake Fluid Pressure Sensor PU Circuit High Voltage
P1E27 Acura Code - Brake Fluid Pressure Sensor PU Circuit High Voltage

Common Causes of P1E27 Acura

  1. Faulty brake fluid pressure sensor.
  2. Damaged wiring or connectors in the sensor circuit.
  3. Corrosion or contamination in the brake fluid.
  4. Issues with the vehicle's electronic control unit (ECU).
  5. Low brake fluid level or air in the brake system.

Symptoms of P1E27 Acura

  1. Illumination of the brake warning light on the instrument panel.
  2. Increased brake pedal effort required to stop the vehicle.
  3. Longer braking distances or reduced braking effectiveness.
  4. ABS (Anti-lock Braking System) malfunction or activation under normal braking conditions.

How to Fix P1E27 Acura

  1. Begin by conducting a visual inspection of the brake fluid pressure sensor, wiring, and connectors for any signs of damage or corrosion.
  2. Test the brake fluid pressure sensor using a multimeter to check for proper voltage output.
  3. Inspect the brake fluid level and quality, ensuring it meets manufacturer specifications.
  4. If necessary, replace the faulty brake fluid pressure sensor and repair any damaged wiring or connectors.
  5. Clear the DTC from the vehicle's ECU using a diagnostic scan tool and perform a test drive to verify that the issue has been resolved.

Cost to Fix P1E27 Acura

The typical repair costs for addressing the Brake Fluid Pressure Sensor PU Circuit High Voltage code can vary depending on the specific cause of the issue and the extent of repairs needed. In general, replacing a faulty brake fluid pressure sensor and addressing any related wiring issues can range from $200 to $500, including parts and labor. However, it is important to note that diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. It is recommended to consult with a qualified mechanic or service center to obtain a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing.

Need more information about the P1E27 Acura code?

Need more information on how to fix the P1E27 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1E27 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1E27 Acura Code

1. What does the OBDII code P1E27 mean on an Acura?

P1E27 indicates a high voltage issue in the Brake Fluid Pressure Sensor PU Circuit, which monitors brake fluid pressure in the braking system.

2. What are the common symptoms of code P1E27 in an Acura?

Symptoms may include the brake warning light illuminating, reduced braking performance, ABS or stability control system malfunctions, and a possible soft or unresponsive brake pedal.

3. What causes the P1E27 code to appear?

Common causes include a faulty brake fluid pressure sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning ABS control module.

4. Can I drive my Acura with a P1E27 code?

It is not recommended to drive with this code as it may indicate compromised braking performance, putting your safety at risk.

5. How do you diagnose the P1E27 code?

Diagnosis involves inspecting the brake fluid pressure sensor, checking the wiring and connectors for damage, and using a scan tool to monitor sensor voltage readings.

6. How can the P1E27 code be fixed?

Repairs may include replacing the brake fluid pressure sensor, repairing or replacing damaged wiring, or reprogramming/resetting the ABS control module if necessary.

7. Does the P1E27 code mean I need to replace my brake fluid?

Not necessarily. While low or contaminated brake fluid is not usually the direct cause of this code, it’s a good idea to check the fluid level and condition as part of diagnosing the issue.

8. What tools are needed to fix a P1E27 code on an Acura?

You’ll need a scan tool or OBDII scanner, a multimeter for testing voltage, and basic hand tools for inspecting and replacing components.

9. How much does it cost to repair the P1E27 code?

Repair costs vary depending on the issue. Replacing a brake fluid pressure sensor typically costs $200–$400, while wiring repairs or ABS module replacement can increase costs.

10. Can a P1E27 code trigger other error codes?

Yes, it may trigger related ABS or stability control system codes as the affected sensor is integral to these systems.

Discuss the causes and fixes for P1E27 Acura OBDII Code

Submit a New Comment

Code P1E27 Acura comments

No comments found for this page.