Engine-Codes.com
Engine-Codes – Chrysler – P1C97 Chrysler

P1C97 Chrysler Code - Gear Shift Position Sensor 1 Circuit High

Quick Answer

The P1C97 code indicates a malfunction in the Gear Shift Position Sensor 1 Circuit, specifically that the circuit is reading a high voltage signal. Common causes include Faulty gear shift position sensor that is sending incorrect voltage signals, Damaged or frayed wiring in the sensor circuit, leading to shorts or open circuits, Corroded or loose electrical connectors that disrupt the signal transmission. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1C97 Chrysler indicates Gear Shift Position Sensor 1 Circuit High.
Common causes
Common causes include Faulty gear shift position sensor that is sending incorrect voltage signals, Damaged or frayed wiring in the sensor circuit, leading to shorts or open circuits, Corroded or loose electrical connectors that disrupt the signal transmission.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 01, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1C97 Chrysler Description

The P1C97 code indicates a malfunction in the Gear Shift Position Sensor 1 Circuit, specifically that the circuit is reading a high voltage signal. This sensor is crucial for the proper functioning of the vehicle's transmission system, as it relays the position of the gear shift lever to the engine control module (ECM). When the ECM receives a high voltage signal from the sensor, it may interpret this as the gear shift being in a position that does not correspond with the actual position, leading to potential issues with gear selection and overall vehicle performance.

OBDII Code P1C97 Chrysler - Gear Shift Position Sensor 1 Circuit High
P1C97 Chrysler Code - Gear Shift Position Sensor 1 Circuit High

Common Causes of P1C97 Chrysler

  1. Faulty gear shift position sensor that is sending incorrect voltage signals.
  2. Damaged or frayed wiring in the sensor circuit, leading to shorts or open circuits.
  3. Corroded or loose electrical connectors that disrupt the signal transmission.
  4. Issues with the engine control module (ECM) that misinterpret sensor data.
  5. Mechanical problems within the transmission that may affect sensor operation.

Symptoms of P1C97 Chrysler

  1. Erratic or harsh shifting of gears, leading to a rough driving experience.
  2. Inability to shift into certain gears, resulting in limited vehicle functionality.
  3. Transmission warning light illuminated on the dashboard.
  4. Poor acceleration or deceleration response, affecting overall vehicle performance.
  5. Engine stalling or hesitation when attempting to change gears.

How to Fix P1C97 Chrysler

  1. Diagnostic Testing: Begin with a thorough diagnostic scan to confirm the P1C97 code and check for any additional codes that may provide further insight into the issue.
  2. Visual Inspection: Inspect the wiring and connectors associated with the gear shift position sensor for signs of damage, corrosion, or loose connections.
  3. Sensor Replacement: If the sensor is determined to be faulty, replace it with a new one. Ensure that the new sensor is compatible with the vehicle's make and model.
  4. Wiring Repair: If any wiring issues are found, repair or replace damaged sections to ensure proper electrical connectivity.
  5. ECM Reprogramming: In some cases, the ECM may need to be reprogrammed or reset to recognize the new sensor and clear any stored fault codes.

Cost to Fix P1C97 Chrysler

The repair costs for addressing the P1C97 code can vary widely, but on average, you can expect to pay between $150 and $500. This estimate includes the cost of parts (typically $50 to $200 for a new gear shift position sensor) and labor (ranging from $100 to $300 depending on the complexity of the repair and the shop's hourly rate). It's important to note that specific diagnosis times and labor rates can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops commonly charge between $80 and $150 per hour; however, rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. For a more precise estimate, it's advisable to check local rates and consult with a trusted mechanic.

Need more information about the P1C97 Chrysler code?

Need more information on how to fix the P1C97 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1C97 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1C97 Chrysler Code

1. What does the OBDII code P1C97 mean on a Chrysler?

The P1C97 code indicates a "Gear Shift Position Sensor 1 Circuit High," meaning the vehicle's powertrain control module (PCM) has detected a high voltage signal from the gear shift position sensor.

2. What are the common symptoms of the P1C97 code on a Chrysler?

Symptoms may include the transmission not shifting properly, erratic gear changes, failure to engage certain gears, a check engine light, or the vehicle going into limp mode.

3. What causes the P1C97 code to appear?

Common causes include a faulty gear shift position sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning powertrain control module (PCM).

4. Can I drive my Chrysler with a P1C97 code?

Driving with this code is not recommended, as it can lead to poor transmission performance or even further damage to the transmission system.

5. How do I diagnose the cause of the P1C97 code?

Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and related wiring for damage, and testing the gear shift position sensor's voltage and resistance.

6. How do I fix the P1C97 code on a Chrysler?

Repairs may include replacing the gear shift position sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.

7. Can a low battery cause the P1C97 code?

While unlikely, a weak or low battery can sometimes cause erratic sensor readings. It’s a good idea to ensure your battery is fully charged and functioning properly.

8. How much does it cost to fix the P1C97 code on a Chrysler?

Repair costs vary based on the issue but can range from $100 to $300 for sensor replacement, with additional costs for wiring repairs or PCM reprogramming.

9. Is the P1C97 code specific to Chrysler vehicles?

Yes, the P1C97 code is manufacturer-specific to Chrysler, Dodge, Jeep, and RAM vehicles and relates to their gear shift position sensor systems.

10. Can I clear the P1C97 code without fixing the problem?

Clearing the code without addressing the underlying issue will only result in the code returning. Proper diagnosis and repair are necessary to resolve it.

Discuss the causes and fixes for P1C97 Chrysler OBDII Code

Submit a New Comment

Code P1C97 Chrysler comments

No comments found for this page.