Engine-Codes.com
Engine-Codes – Buick – P1AEA Buick

P1AEA Buick Code - Drive Motor 2 Control Module Hybrid Battery Voltage Sense Circuit Low Voltage

Quick Answer

The P1AEA code indicates a malfunction in the Drive Motor 2 Control Module related to the hybrid battery voltage sense circuit, specifically noting a low voltage condition. Common causes include Faulty hybrid battery or cells within the battery pack, Damaged or corroded wiring in the voltage sense circuit, Poor electrical connections at the battery terminals or control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1AEA Buick indicates Drive Motor 2 Control Module Hybrid Battery Voltage Sense Circuit Low Voltage.
Common causes
Common causes include Faulty hybrid battery or cells within the battery pack, Damaged or corroded wiring in the voltage sense circuit, Poor electrical connections at the battery terminals or control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 25, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1AEA Buick Description

The P1AEA code indicates a malfunction in the Drive Motor 2 Control Module related to the hybrid battery voltage sense circuit, specifically noting a low voltage condition. This code is particularly relevant for hybrid vehicles, where the hybrid battery plays a critical role in powering the electric motor and assisting the internal combustion engine. When the voltage sense circuit reports low voltage, it suggests that the control module is not receiving adequate voltage readings from the hybrid battery, which can severely impact the vehicle's performance.

OBDII Code P1AEA Buick - Drive Motor 2 Control Module Hybrid Battery Voltage Sense Circuit Low Voltage
P1AEA Buick Code - Drive Motor 2 Control Module Hybrid Battery Voltage Sense Circuit Low Voltage

Common Causes of P1AEA Buick

  1. Faulty hybrid battery or cells within the battery pack.
  2. Damaged or corroded wiring in the voltage sense circuit.
  3. Poor electrical connections at the battery terminals or control module.
  4. Malfunctioning Drive Motor 2 Control Module.
  5. Environmental factors such as extreme temperatures affecting battery performance.

Symptoms of P1AEA Buick

  1. Reduced acceleration and overall power output.
  2. Warning lights illuminated on the dashboard, particularly the hybrid system warning light.
  3. Decreased fuel efficiency compared to previous performance metrics.
  4. Vehicle entering limp mode, limiting speed and power.
  5. Unusual noises from the hybrid system or electric motor during operation.

How to Fix P1AEA Buick

  1. Diagnostic Testing: Begin with a thorough diagnostic scan to confirm the P1AEA code and check for any additional codes that may provide further insight into the issue.
  2. Visual Inspection: Inspect the wiring and connectors associated with the hybrid battery and Drive Motor 2 Control Module for signs of damage, corrosion, or loose connections.
  3. Battery Testing: Conduct a load test on the hybrid battery to assess its health and determine if any cells are failing, which could contribute to low voltage readings.
  4. Repair or Replace Components: If damaged wiring or connectors are found, repair or replace them as necessary. If the hybrid battery is determined to be faulty, consider replacing it.
  5. Reprogramming or Replacement of Control Module: If the Drive Motor 2 Control Module is malfunctioning, it may require reprogramming or replacement to restore proper communication and functionality.

Cost to Fix P1AEA Buick

The cost to repair the P1AEA code can vary significantly based on the specific diagnosis and the components that require attention. Typical repair costs may range from $500 to $2,500, depending on whether the issue is with the wiring, the hybrid battery, or the control module itself. Labor costs can vary widely; most auto repair shops charge between $80 and $150 per hour. In metropolitan areas or at dealerships, rates may be higher, while independent shops often offer lower rates. Additionally, the time required for diagnosis and repair can differ based on the complexity of the issue and the vehicle's make and model. It is advisable to check local rates for a more precise estimate tailored to your situation.

Need more information about the P1AEA Buick code?

Need more information on how to fix the P1AEA Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1AEA Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1AEA Buick Code

1. What does OBDII code P1AEA mean for a Buick?

Code P1AEA indicates a problem with the hybrid battery voltage sense circuit in Drive Motor 2 Control Module, specifically low voltage.

2. What are the symptoms of code P1AEA in a Buick?

Common symptoms include reduced hybrid performance, warning lights on the dashboard, poor fuel economy, or the vehicle entering limp mode.

3. What causes the P1AEA code to appear?

This code is typically caused by issues such as damaged wiring, a faulty Drive Motor 2 Control Module, a malfunctioning hybrid battery, or a poor electrical connection.

4. Can I drive my Buick with the P1AEA code?

It’s not recommended to drive with this code active, as it could lead to further damage to the hybrid system and reduced vehicle performance.

5. How do you diagnose the P1AEA code?

Diagnosis involves using an OBDII scanner to confirm the code, inspecting wiring and connections, testing the voltage sense circuit, and checking the hybrid battery and control module.

6. What repairs are needed to fix the P1AEA code?

Repairs may include replacing damaged wiring, repairing faulty connectors, replacing the Drive Motor 2 Control Module, or servicing the hybrid battery.

7. How much does it cost to repair the P1AEA code on a Buick?

Repair costs can vary widely depending on the issue but typically range from $200 for wiring repairs to over $1,000 if the hybrid battery or control module needs replacement.

8. Can a weak hybrid battery cause the P1AEA code?

Yes, a degraded or weak hybrid battery can cause low voltage in the sense circuit, triggering this code.

9. Will resetting the code fix the P1AEA issue?

Resetting the code may clear the warning temporarily, but the underlying issue must be addressed to prevent the code from returning.

10. Is the P1AEA code specific to Buicks?

While specific to hybrid or electric vehicles like Buicks, similar codes may appear in other brands with hybrid systems if they experience similar issues.

Discuss the causes and fixes for P1AEA Buick OBDII Code

Submit a New Comment

Code P1AEA Buick comments

No comments found for this page.