P1925 Lincoln Code - Fuel Additive Level Circuit High
Quick Answer
The P1925 diagnostic trouble code for Lincoln vehicles refers to a Fuel Additive Level Circuit High. Common causes include Faulty Fuel Additive Level Sensor: A defective sensor can send incorrect signals to the ECM, triggering the code, Damaged Wiring: Any damage to the wiring connecting the sensor to the ECM can cause a high voltage signal, Poor Electrical Connection: Corrosion or poor connections in the sensor circuit can lead to high voltage readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1925 Lincoln indicates Fuel Additive Level Circuit High.
- Common causes
- Common causes include Faulty Fuel Additive Level Sensor: A defective sensor can send incorrect signals to the ECM, triggering the code, Damaged Wiring: Any damage to the wiring connecting the sensor to the ECM can cause a high voltage signal, Poor Electrical Connection: Corrosion or poor connections in the sensor circuit can lead to high voltage readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1925 Lincoln Description
The P1925 diagnostic trouble code for Lincoln vehicles refers to a Fuel Additive Level Circuit High. This code is triggered when the engine control module (ECM) detects a high voltage signal from the fuel additive level sensor circuit. The fuel additive level sensor is responsible for monitoring the level of fuel additives in the tank, such as diesel exhaust fluid (DEF) in modern diesel vehicles. The ECM uses this information to optimize the fuel injection timing and ensure proper emissions control.
Common Causes of P1925 Lincoln
- Faulty Fuel Additive Level Sensor: A defective sensor can send incorrect signals to the ECM, triggering the code.
- Damaged Wiring: Any damage to the wiring connecting the sensor to the ECM can cause a high voltage signal.
- Poor Electrical Connection: Corrosion or poor connections in the sensor circuit can lead to high voltage readings.
- Malfunctioning ECM: In rare cases, a malfunctioning ECM can misinterpret sensor signals and trigger the code.
- Contaminated Fuel Additive: Contaminants in the fuel additive tank can interfere with the sensor's operation and trigger the code.
Symptoms of P1925 Lincoln
- Check Engine Light: The most common symptom associated with the P1925 code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Engine Power: The vehicle may experience a decrease in engine power, especially during acceleration.
- Emissions Issues: The vehicle may fail emissions tests due to improper DEF levels.
- Difficulty Starting: In severe cases, the vehicle may have difficulty starting or may not start at all.
- Poor Fuel Efficiency: The vehicle may experience decreased fuel efficiency as a result of the ECM compensating for the high fuel additive level signal.
How to Fix P1925 Lincoln
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and pinpoint the exact cause of the high voltage signal.
- Inspect Wiring and Connections: Check the wiring and connections for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test Fuel Additive Level Sensor: Test the fuel additive level sensor using a multimeter to ensure it is functioning properly. Replace if faulty.
- Clear Codes: Clear the trouble codes from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
- Monitor System: Monitor the fuel additive level circuit for any reoccurrence of the code and address any issues promptly.
Cost to Fix P1925 Lincoln
The typical repair costs for addressing a P1925 code can vary depending on the specific cause of the issue. In general, replacing a faulty fuel additive level sensor can cost between $100 and $300, including parts and labor. However, if the issue is related to wiring or electrical connections, the cost may increase due to additional diagnostic time and labor. It is recommended to consult with a professional mechanic for an accurate cost estimate based on the specific circumstances of the vehicle. Keep in mind that labor rates at auto repair shops can vary based on location, vehicle make and model, and engine type.
Need more information about the P1925 Lincoln code?
Need more information on how to fix the P1925 Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1925 Lincoln code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1925 Lincoln Code
No Frequently Asked Questions about P1925 Lincoln Code found.
Discuss the causes and fixes for P1925 Lincoln OBDII Code
Code P1925 Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.