P1912 Audi Code - Brake Servo Pressure Sensor Open Circuit/Short To Positive
Quick Answer
The P1912 diagnostic trouble code for Audi indicates a potential issue with the brake servo pressure sensor being open circuit or shorted to positive. Common causes include Damaged wiring harness or connectors, Failed brake servo pressure sensor, Faulty electronic control unit (ECU). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1912 Audi indicates Brake Servo Pressure Sensor Open Circuit/Short To Positive.
- Common causes
- Common causes include Damaged wiring harness or connectors, Failed brake servo pressure sensor, Faulty electronic control unit (ECU).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1912 Audi Description
The P1912 diagnostic trouble code for Audi indicates a potential issue with the brake servo pressure sensor being open circuit or shorted to positive. The brake servo pressure sensor is a crucial component of the vehicle's braking system, responsible for measuring the pressure applied to the brakes and transmitting this information to the vehicle's electronic control unit (ECU). When this sensor malfunctions or experiences an open circuit or short to positive, it can lead to inaccurate readings being sent to the ECU, resulting in potential safety hazards and compromised braking performance.
Common Causes of P1912 Audi
- Damaged wiring harness or connectors
- Failed brake servo pressure sensor
- Faulty electronic control unit (ECU)
- Corrosion or contamination in sensor connections
- Electrical short circuits in the brake system
Symptoms of P1912 Audi
- Illuminated brake warning light on the dashboard
- Inconsistent or delayed brake response
- Increased brake pedal effort required for braking
- ABS system malfunctions or error codes
- Loss of power assistance in braking
How to Fix P1912 Audi
- Begin by conducting a thorough inspection of the brake servo pressure sensor, wiring harness, and connectors for any visible damage or corrosion.
- Test the sensor's resistance and output voltage to determine if it is functioning within the manufacturer's specifications.
- Check the ECU for any error codes related to the brake servo pressure sensor and perform any necessary diagnostic procedures.
- Replace the brake servo pressure sensor if it is found to be faulty, ensuring proper installation and calibration.
- Clear the diagnostic trouble codes from the ECU memory and perform a test drive to verify that the issue has been resolved.
Cost to Fix P1912 Audi
The typical repair costs for addressing a P1912 code related to the brake servo pressure sensor open circuit or short to positive can vary depending on the extent of the issue and the specific components that require replacement. In general, the cost of replacing a faulty brake servo pressure sensor can range from $150 to $300, including parts and labor. Additional costs may arise if wiring harnesses or connectors need to be repaired or replaced.
Need more information about the P1912 Audi code?
Need more information on how to fix the P1912 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1912 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1912 Audi Code
1. What does the OBDII code P1912 mean on an Audi?
P1912 indicates a fault with the brake servo pressure sensor, specifically an open circuit or a short to positive.
2. What are the common symptoms of code P1912 in an Audi?
Symptoms may include a malfunctioning brake assist system, warning lights on the dashboard (such as ABS or brake system warning), and reduced braking performance.
3. What causes the P1912 code to appear?
Possible causes include a faulty brake servo pressure sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning ABS control module.
4. Can I still drive my Audi with the P1912 code?
You may still be able to drive, but braking performance could be compromised. It’s important to address the issue promptly to ensure safety.
5. How do I diagnose the P1912 code in my Audi?
Start by checking the brake servo pressure sensor and its wiring for visible damage, corrosion, or loose connections. Use a multimeter to test for proper voltage and continuity in the circuit.
6. How can I fix the P1912 code in an Audi?
Repairs may involve replacing the brake servo pressure sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ABS control module if necessary.
7. What tools are needed to repair the P1912 code?
You’ll typically need a diagnostic scanner, a multimeter, and basic automotive tools to inspect and repair the sensor or wiring.
8. How much does it cost to fix the P1912 code on an Audi?
Repair costs can vary, but replacing the brake servo pressure sensor typically ranges from $100 to $300, depending on parts and labor.
9. Can a bad battery cause the P1912 code?
While unlikely, a weak or failing battery can cause electrical issues that might trigger fault codes. It’s worth checking the battery’s condition during diagnosis.
10. Is it necessary to clear the P1912 code after repairs?
Yes, after completing the repairs, use a diagnostic scanner to clear the code and verify that it doesn’t return.
Discuss the causes and fixes for P1912 Audi OBDII Code
Code P1912 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.