Engine-Codes.com
Engine-Codes – Audi – P1911 Audi

P1911 Audi Code - Data Bus ECM 1/2 Circuit Malfunction

Quick Answer

The P1911 code for Audi indicates a Data Bus ECM 1/2 Circuit Malfunction. Common causes include Damaged Wiring: Frayed or corroded wiring in the ECM circuit can disrupt the communication signal between the ECM and the data bus, Faulty ECM: A malfunctioning ECM can cause communication errors and trigger this code, Loose or Corroded Connectors: Loose or corroded connectors in the data bus system can interrupt the communication flow between ECUs. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1911 Audi indicates Data Bus ECM 1/2 Circuit Malfunction.
Common causes
Common causes include Damaged Wiring: Frayed or corroded wiring in the ECM circuit can disrupt the communication signal between the ECM and the data bus, Faulty ECM: A malfunctioning ECM can cause communication errors and trigger this code, Loose or Corroded Connectors: Loose or corroded connectors in the data bus system can interrupt the communication flow between ECUs.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1911 Audi Description

The P1911 code for Audi indicates a Data Bus ECM 1/2 Circuit Malfunction. This means that there is a communication issue between the Engine Control Module (ECM) and the data bus system in the vehicle. The data bus system is responsible for transmitting information between various electronic control units (ECUs) in the vehicle, allowing them to communicate with each other and work together efficiently.

OBDII Code P1911 Audi - Data Bus ECM 1/2 Circuit Malfunction
P1911 Audi Code - Data Bus ECM 1/2 Circuit Malfunction

Common Causes of P1911 Audi

  1. Damaged Wiring: Frayed or corroded wiring in the ECM circuit can disrupt the communication signal between the ECM and the data bus.
  2. Faulty ECM: A malfunctioning ECM can cause communication errors and trigger this code.
  3. Loose or Corroded Connectors: Loose or corroded connectors in the data bus system can interrupt the communication flow between ECUs.
  4. Software Issues: Software glitches or updates in the ECM can also lead to communication errors and trigger this code.
  5. Other Electrical Issues: Problems with other electrical components connected to the data bus system, such as sensors or modules, can also contribute to this malfunction.

Symptoms of P1911 Audi

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Engine Performance Issues: The vehicle may experience rough idling, stalling, or hesitation during acceleration due to the communication breakdown between the ECM and other systems.
  3. Reduced Fuel Efficiency: A malfunction in the ECM data bus circuit can lead to poor fuel efficiency, causing the vehicle to consume more fuel than usual.
  4. Transmission Problems: The transmission may shift erratically or experience delays in response due to the lack of proper communication between the ECM and transmission control module.

How to Fix P1911 Audi

  1. Diagnostic Scan: Begin by conducting a diagnostic scan using an OBD-II scanner to retrieve the specific fault codes and identify the source of the issue.
  2. Inspect Wiring and Connectors: Check the wiring harness and connectors in the ECM circuit for any signs of damage, corrosion, or looseness. Repair or replace as necessary.
  3. Test ECM: Test the ECM for proper functionality and communication with other systems. Replace the ECM if it is found to be faulty.
  4. Clear Codes: Clear the fault codes from the vehicle's memory after completing the repairs and test drive the vehicle to ensure the issue has been resolved.
  5. Relearn Procedures: Perform any necessary relearn procedures for the ECM to recalibrate and establish proper communication with other systems in the vehicle.

Cost to Fix P1911 Audi

The typical repair costs for addressing a Data Bus ECM 1/2 Circuit Malfunction can range from $200 to $600, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary depending on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It is advisable to check with local repair shops for a more accurate estimate based on the specific circumstances.

Need more information about the P1911 Audi code?

Need more information on how to fix the P1911 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1911 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1911 Audi Code

1. What does the OBDII code P1911 mean on an Audi?

P1911 indicates a "Data Bus ECM 1/2 Circuit Malfunction," meaning there is a communication issue between the engine control modules (ECM 1 and ECM 2) on the vehicle's data bus network.

2. What are the common symptoms of the P1911 code on an Audi?

Common symptoms include the check engine light being illuminated, reduced engine performance, poor fuel efficiency, erratic shifting (in automatic vehicles), or difficulty starting the engine.

3. What causes the P1911 code to appear?

The code can be triggered by faulty wiring or connectors in the data bus circuit, a malfunctioning ECM, software issues, or interference from other failing components on the data bus network.

4. How is the P1911 code diagnosed?

A technician will use a diagnostic scanner to verify the code, inspect the data bus wiring and connectors for damage or corrosion, and test the communication signal between ECM 1 and ECM 2.

5. Can a P1911 code cause long-term damage if ignored?

Ignoring this code can lead to worsening performance issues, potential damage to the ECMs, or failure of other systems that rely on accurate data communication.

6. Is it safe to drive with the P1911 code on an Audi?

Driving with the P1911 code is not recommended, as it may cause unpredictable performance issues or result in the vehicle entering limp mode, which limits power and drivability.

7. How can I fix the P1911 code on my Audi?

Repairs may involve inspecting and repairing damaged wiring or connectors, reprogramming or updating the ECM software, or replacing a faulty ECM if necessary.

8. Can a weak battery cause the P1911 code?

Yes, a weak or failing battery can cause voltage fluctuations that may disrupt communication on the data bus network and trigger the P1911 code.

9. How much does it cost to repair an Audi with a P1911 code?

Repair costs can vary, ranging from $100–$300 for wiring repairs to over $1,000 if an ECM replacement is needed. Diagnostic fees may also apply.

10. How can I prevent the P1911 code from reoccurring?

Regularly inspect and maintain the vehicle's electrical system, ensure software updates are applied, and address any warning signs like flickering lights or intermittent power loss promptly.

Discuss the causes and fixes for P1911 Audi OBDII Code

Submit a New Comment

Code P1911 Audi comments

No comments found for this page.