P1908 Code - Data Bus ECM 1/2 Software Version Monitoring
Quick Answer
The diagnostic trouble code P1908 refers to an issue with the Data Bus ECM 1/2 Software Version Monitoring system in a vehicle. Common causes include Software Update Issue: A recent software update or reprogramming of a module could result in a mismatch of software versions on the data bus, Faulty Module: A malfunctioning module or sensor on the data bus system could be sending incorrect software version information to the ECM, Wiring or Connection Problem: A damaged or loose connection in the data bus system could disrupt communication between modules. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1908 indicates Data Bus ECM 1/2 Software Version Monitoring.
- Common causes
- Common causes include Software Update Issue: A recent software update or reprogramming of a module could result in a mismatch of software versions on the data bus, Faulty Module: A malfunctioning module or sensor on the data bus system could be sending incorrect software version information to the ECM, Wiring or Connection Problem: A damaged or loose connection in the data bus system could disrupt communication between modules.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1908 Description
The diagnostic trouble code P1908 refers to an issue with the Data Bus ECM 1/2 Software Version Monitoring system in a vehicle. In modern vehicles, the Electronic Control Module (ECM) is responsible for controlling various engine functions, such as fuel injection timing, ignition timing, and emissions control. The ECM communicates with other modules and sensors in the vehicle through a data bus system, which allows for the exchange of information necessary for proper vehicle operation.
Common Causes of P1908
- Software Update Issue: A recent software update or reprogramming of a module could result in a mismatch of software versions on the data bus.
- Faulty Module: A malfunctioning module or sensor on the data bus system could be sending incorrect software version information to the ECM.
- Wiring or Connection Problem: A damaged or loose connection in the data bus system could disrupt communication between modules.
- ECM Malfunction: A faulty ECM could also be the cause of the P1908 code, as it may not be properly monitoring the software versions on the data bus.
Symptoms of P1908
- Check Engine Light: The most common symptom associated with the P1908 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Poor Engine Performance: The vehicle may experience rough idling, hesitation, or a decrease in overall engine performance.
- Decreased Fuel Efficiency: A discrepancy in the software versions on the data bus system can lead to increased fuel consumption.
- Stalling: In some cases, the vehicle may stall or have difficulty starting due to communication errors between modules.
How to Fix P1908
- Diagnose Fault Codes: Use a scan tool to retrieve the P1908 code and any related fault codes stored in the ECM.
- Check Software Versions: Verify the software versions of all modules and sensors on the data bus system to identify any discrepancies.
- Repair or Replace Faulty Components: Replace any faulty modules, sensors, or wiring that may be causing the issue.
- Clear Fault Codes: Once the repairs are completed, clear the fault codes stored in the ECM to reset the Check Engine Light.
Cost to Fix P1908
The typical repair costs for addressing the P1908 code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of diagnosing and repairing this issue could range from $100 to $500, including parts and labor. However, it's important to note that the actual cost may be higher or lower based on factors such as the vehicle make and model, the location of the repair shop, and the complexity of the repairs required. It's recommended to consult with a qualified mechanic for a more accurate estimate based on your specific circumstances.
Need more information about the P1908 code?
Need more information on how to fix the P1908 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1908 code diagnosed by a professional: Find a repair shop in your area
Code P1908 Information for Specific Makes
- P1908 Audi — Data Bus ECM 1/2 Software Version Monitoring
- P1908 Ford — Transmission Pressure Circuit Solenoid Open or Short to Ground
- P1908 Saab — CAN Data Bus Instrument Panel
- P1908 Volkswagen — Data Bus ECM 1/2 Software Version Monitoring
Frequently Asked Questions about P1908 Code
No Frequently Asked Questions about P1908 Code found.
Discuss the causes and fixes for P1908 OBDII Code
Code P1908 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.