P1902 Audi Code - Engine Coolant Blower Motor Run-On Relay Short To Ground
Quick Answer
The P1902 diagnostic trouble code for Audi indicates a problem with the Engine Coolant Blower Motor Run-On Relay Short to Ground. Common causes include Faulty engine coolant blower motor relay, Short circuit in the wiring of the blower motor relay, Corrosion in the electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1902 Audi indicates Engine Coolant Blower Motor Run-On Relay Short To Ground.
- Common causes
- Common causes include Faulty engine coolant blower motor relay, Short circuit in the wiring of the blower motor relay, Corrosion in the electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1902 Audi Description
The P1902 diagnostic trouble code for Audi indicates a problem with the Engine Coolant Blower Motor Run-On Relay Short to Ground. The engine coolant blower motor is responsible for ensuring that the engine stays at the optimal operating temperature by cooling down the engine coolant. The relay controls when the blower motor turns on and off. When the relay is shorted to ground, it means that there is an electrical issue where the relay is sending a continuous signal to the blower motor, causing it to run constantly even when it is not needed. This can lead to overheating of the engine and other components, potentially causing damage to the engine and other systems.
Common Causes of P1902 Audi
- Faulty engine coolant blower motor relay
- Short circuit in the wiring of the blower motor relay
- Corrosion in the electrical connections
- Faulty engine coolant temperature sensor
- Electrical issues in the cooling system
Symptoms of P1902 Audi
- Engine overheating
- Constant fan noise coming from the engine compartment
- Battery drain
- Check Engine Light illuminated
- Reduced fuel efficiency
How to Fix P1902 Audi
- Begin by diagnosing the issue by checking the engine coolant blower motor relay for any signs of damage or short circuits.
- Inspect the wiring and connections related to the blower motor relay for any signs of corrosion or damage.
- Test the engine coolant temperature sensor to ensure it is functioning correctly.
- Replace the faulty engine coolant blower motor relay if necessary.
- Clear the diagnostic trouble code and test the vehicle to ensure the issue has been resolved.
Cost to Fix P1902 Audi
The typical repair costs for resolving the P1902 code related to the Engine Coolant Blower Motor Run-On Relay Short to Ground can range from $150 to $300, including parts and labor. However, it is essential to note that the actual cost can vary based on several factors such as the location of the repair shop, the make and model of the vehicle, and the extent of the damage. Additionally, the diagnosis time and labor rates at auto repair shops can influence the final cost. It is advisable to contact local repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P1902 Audi code?
Need more information on how to fix the P1902 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1902 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1902 Audi Code
What does OBDII code P1902 mean for an Audi?
P1902 indicates a short-to-ground issue in the Engine Coolant Blower Motor Run-On Relay circuit.
What are common symptoms of code P1902?
Symptoms may include the engine cooling fan running excessively, overheating, or a check engine light.
What causes code P1902 in an Audi?
Common causes include damaged wiring, a faulty relay, or a short circuit within the blower motor run-on relay.
Can I drive my Audi with a P1902 code?
While the car may still be drivable, ignoring the issue can lead to overheating or further electrical damage.
How is code P1902 diagnosed?
Diagnosis includes inspecting the wiring, testing the relay, and checking the cooling fan circuit for shorts or damage.
What tools are needed to fix P1902?
Basic tools include a multimeter for testing electrical circuits and a scan tool to clear the code after repairs.
How do you repair code P1902?
Repairs may involve replacing the faulty relay, fixing damaged wiring, or addressing any short circuits.
How much does it cost to fix P1902?
Repair costs vary but typically range from $100 to $300 depending on labor and parts.
Can a faulty cooling fan cause P1902?
Yes, a malfunctioning cooling fan can contribute to the short circuit triggering this code.
Will replacing the relay clear the P1902 code?
Replacing a damaged relay can resolve the issue, but the code must be cleared with an OBDII scan tool after repairs.
Discuss the causes and fixes for P1902 Audi OBDII Code
Code P1902 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.