P1901 2010 Ford Fusion Code - Turbine Shaft Speed Sensor Circuit Intermittent
Quick Answer
The P1901 code for a 2010 Ford Fusion indicates a problem with the Turbine Shaft Speed Sensor Circuit being intermittent. Common causes include Faulty turbine shaft speed sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1901 2010 Ford Fusion indicates Turbine Shaft Speed Sensor Circuit Intermittent.
- Common causes
- Common causes include Faulty turbine shaft speed sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1901 2010 Ford Fusion Description
The P1901 code for a 2010 Ford Fusion indicates a problem with the Turbine Shaft Speed Sensor Circuit being intermittent. The turbine shaft speed sensor is a crucial component in the transmission system of the vehicle. It is responsible for monitoring the speed of the input shaft of the transmission, which is essential for the proper operation of the transmission and the vehicle as a whole.
Common Causes of P1901 2010 Ford Fusion
- Faulty turbine shaft speed sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion or contamination in the sensor connections
- Issues with the vehicle's computer or software
- Electrical interference or grounding issues
Symptoms of P1901 2010 Ford Fusion
- Erratic shifting
- Hesitation when accelerating
- Transmission slippage
- Illumination of the Check Engine Light
- Reduced fuel efficiency
How to Fix P1901 2010 Ford Fusion
- Begin by diagnosing the specific cause of the intermittent circuit, which may involve testing the sensor, checking the wiring, and inspecting the connections.
- Replace the turbine shaft speed sensor if it is found to be faulty.
- Repair or replace any damaged wiring or connectors in the sensor circuit.
- Clean any corrosion or contamination in the sensor connections.
- Reset the vehicle's computer and clear the error code to see if the issue has been resolved.
Cost to Fix P1901 2010 Ford Fusion
The typical repair costs for addressing a P1901 code on a 2010 Ford Fusion can range from $200 to $500, depending on the specific cause of the issue and the labor rates at the repair shop. This estimate includes the cost of the sensor, any necessary wiring or connectors, and the labor involved in diagnosing and repairing the problem. It's important to note that prices can vary based on location, vehicle make and model, and the extent of the repairs needed. It's recommended to obtain quotes from local repair shops for a more accurate estimate.
Need more information about the P1901 2010 Ford Fusion code?
Need more information on how to fix the P1901 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1901 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1901 2010 Ford Fusion Code
What does the OBDII code P1901 mean for a 2010 Ford Fusion?
The P1901 code indicates an intermittent issue in the Turbine Shaft Speed (TSS) Sensor Circuit, which monitors the rotational speed of the transmission's input shaft.
What are common symptoms of the P1901 code in a 2010 Ford Fusion?
Symptoms can include erratic shifting, harsh or delayed gear changes, reduced fuel efficiency, or the transmission going into limp mode. You may also see the Check Engine Light illuminated.
What causes the P1901 code in a 2010 Ford Fusion?
Common causes include a faulty TSS sensor, damaged wiring or connectors in the TSS circuit, transmission fluid contamination, or a malfunctioning Powertrain Control Module (PCM).
Can I drive my 2010 Ford Fusion with the P1901 code?
Driving with the P1901 code is not recommended, as it can lead to further transmission issues, poor drivability, and potential damage to other components.
How is the P1901 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the TSS sensor and its wiring for damage, check transmission fluid levels and quality, and possibly perform a transmission input/output speed comparison.
How can I fix the P1901 code on my 2010 Ford Fusion?
Repairs may include replacing the TSS sensor, repairing or replacing damaged wiring or connectors, flushing and refilling the transmission fluid, or reprogramming the PCM if needed.
Where is the Turbine Shaft Speed Sensor located on a 2010 Ford Fusion?
The TSS sensor is typically located inside the transmission, near the input shaft. Refer to a repair manual for the exact location in your vehicle.
How much does it cost to fix the P1901 code on a 2010 Ford Fusion?
Repair costs typically range from $150 to $500, depending on whether the TSS sensor, wiring repairs, or other components need replacement or service.
What happens if I ignore the P1901 code on my 2010 Ford Fusion?
Ignoring the code can lead to worsening transmission performance, additional component failures, and higher repair costs over time.
Can the P1901 code be caused by low transmission fluid?
Yes, low or contaminated transmission fluid can cause erratic sensor readings and trigger the P1901 code. Always check fluid levels and condition as part of the diagnostic process.
Discuss the causes and fixes for P1901 2010 Ford Fusion OBDII Code
Code P1901 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.