P185F GMC Code - Transfer Case Shift Pending Signal Not Plausible
Quick Answer
The P185F GMC code indicates that the transfer case shift pending signal is not plausible. Common causes include Faulty transfer case shift motor, Wiring issues or loose connections, Damaged transfer case position sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P185F GMC indicates Transfer Case Shift Pending Signal Not Plausible.
- Common causes
- Common causes include Faulty transfer case shift motor, Wiring issues or loose connections, Damaged transfer case position sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P185F GMC Description
The P185F GMC code indicates that the transfer case shift pending signal is not plausible. The transfer case is a critical component in four-wheel-drive and all-wheel-drive vehicles that allows for the distribution of power between the front and rear axles. When this signal is not plausible, it means that there is an issue with the communication between the transfer case control module and other related components.
Common Causes of P185F GMC
- Faulty transfer case shift motor
- Wiring issues or loose connections
- Damaged transfer case position sensor
- Malfunctioning transfer case control module
- Corrosion or debris in the transfer case shift mechanism
Symptoms of P185F GMC
- Difficulty shifting between two-wheel drive and four-wheel drive modes
- Illumination of the service 4WD light on the dashboard
- Unusual noises coming from the transfer case area
- Loss of traction or stability in slippery conditions
- Delayed engagement of four-wheel drive mode
How to Fix P185F GMC
- Begin by conducting a thorough diagnostic scan to retrieve the specific trouble codes and identify the underlying cause of the issue.
- Inspect the transfer case shift motor, wiring harness, and connectors for any signs of damage or wear. Replace or repair any faulty components.
- Check the transfer case position sensor for proper function and alignment. Calibrate or replace as necessary.
- Test the transfer case control module for communication errors and functionality. Replace if deemed defective.
- Clear the trouble codes from the vehicle's computer system and perform a test drive to ensure the issue has been resolved.
Cost to Fix P185F GMC
The typical repair costs for addressing a P185F GMC code can range from $200 to $600, depending on the specific cause of the issue and the cost of replacement parts. This estimate includes the cost of parts such as the transfer case shift motor, wiring harness, position sensor, or control module, as well as labor charges. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is advisable to check with local providers for a more accurate estimate.
Need more information about the P185F GMC code?
Need more information on how to fix the P185F GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P185F GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P185F 2014 GMC Sierra — Transfer Case Shift Pending Signal Not Plausible
- P185F 2015 GMC Sierra — Transfer Case Shift Pending Signal Not Plausible
- P185F 2016 GMC Sierra — Transfer Case Shift Pending Signal Not Plausible
- P185F 2017 GMC Sierra — Transfer Case Shift Pending Signal Not Plausible
- P185F 2018 GMC Sierra — Transfer Case Shift Pending Signal Not Plausible
Frequently Asked Questions about P185F GMC Code
1. What are the common symptoms of OBDII code P185F GMC?
- Common symptoms include difficulty shifting the transfer case, the transfer case getting stuck in a particular mode, and warning lights illuminating on the dashboard.
2. What can cause the OBDII code P185F GMC to trigger?
- The code P185F GMC typically triggers due to issues with the transfer case shift control module, faulty wiring or connectors, or a malfunction in the transfer case actuator.
3. How serious is the OBDII code P185F GMC?
- The code P185F GMC can affect the proper functioning of the transfer case, leading to potential drivability issues. It is recommended to address this code promptly to prevent further damage.
4. Can I continue driving my vehicle with the OBDII code P185F GMC?
- It is not advisable to continue driving the vehicle with the code P185F GMC present, as it can lead to further damage to the transfer case system.
5. What are some DIY repair tips for OBDII code P185F GMC?
- DIY repair tips include checking and tightening any loose wiring connections, inspecting the transfer case shift control module for signs of damage, and ensuring all components are securely in place.
6. How can I diagnose the OBDII code P185F GMC?
- Diagnosis of the code P185F GMC involves using a scan tool to retrieve the fault codes, conducting a visual inspection of the transfer case components, and performing tests on the transfer case shift control module.
7. Is it necessary to reset the OBDII code P185F GMC after making repairs?
- Yes, it is essential to reset the code P185F GMC after making any repairs to clear the fault code from the vehicle's memory and verify if the issue has been resolved.
8. Can extreme weather conditions contribute to triggering the OBDII code P185F GMC?
- Yes, extreme temperature changes or harsh driving conditions can sometimes contribute to triggering the code P185F GMC due to the strain they put on the transfer case components.
9. How much does it typically cost to repair the OBDII code P185F GMC?
- The cost of repairing the code P185F GMC can vary depending on the root cause of the issue, but it may involve expenses for parts replacement, labor, and potential diagnostic fees.
10. Are there any recalls or technical service bulletins related to the OBDII code P185F GMC?
- It is advisable to check with the manufacturer or authorized service centers for any recalls or technical service bulletins related to the OBDII code P185F GMC to see if your vehicle is eligible for any repair assistance.
Discuss the causes and fixes for P185F GMC OBDII Code
Code P185F GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.