P182C 2017 GMC Sierra Code - Internal Mode Switch 'B' Circuit High Voltage
Quick Answer
The P182C diagnostic trouble code (DTC) for a 2017 GMC Sierra refers to an issue with the Internal Mode Switch 'B' Circuit High Voltage. Common causes include Faulty internal mode switch, Damaged wiring or connectors, Issues with the TCM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P182C 2017 GMC Sierra indicates Internal Mode Switch 'B' Circuit High Voltage.
- Common causes
- Common causes include Faulty internal mode switch, Damaged wiring or connectors, Issues with the TCM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P182C 2017 GMC Sierra Description
The P182C diagnostic trouble code (DTC) for a 2017 GMC Sierra refers to an issue with the Internal Mode Switch 'B' Circuit High Voltage. This code indicates that there is a problem with the circuit that controls the internal mode switch, which is responsible for selecting the gear range in the transmission. The internal mode switch is a critical component that communicates with the transmission control module (TCM) to determine the appropriate gear selection based on driver input and vehicle operating conditions.
Common Causes of P182C 2017 GMC Sierra
- Faulty internal mode switch
- Damaged wiring or connectors
- Issues with the TCM
- Corrosion or moisture in the transmission system
- Electrical system malfunctions
Symptoms of P182C 2017 GMC Sierra
- Erratic shifting behavior
- Harsh or delayed gear changes
- Transmission slipping
- Illuminated check engine light
- Reduced fuel efficiency
How to Fix P182C 2017 GMC Sierra
- Begin by conducting a thorough diagnostic scan to confirm the P182C code and identify any additional related codes.
- Inspect the internal mode switch, wiring, and connectors for any visible damage or corrosion.
- Test the internal mode switch using a multimeter to check for proper voltage readings.
- If the internal mode switch is faulty, replace it with a new OEM part and ensure proper calibration.
- Clear the DTCs from the vehicle's memory and perform a test drive to verify that the issue has been resolved.
Cost to Fix P182C 2017 GMC Sierra
The typical repair costs for addressing the Internal Mode Switch 'B' Circuit High Voltage code can vary depending on the specific cause of the issue. In general, replacing the internal mode switch and addressing any related wiring or connector issues can range from $200 to $500 in parts and labor. However, it's important to note that diagnostic time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. It's recommended to consult with a trusted mechanic or dealership to obtain a more accurate estimate based on your specific circumstances.
Need more information about the P182C 2017 GMC Sierra code?
Need more information on how to fix the P182C 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P182C 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P182C 2017 GMC Sierra Code
1. What does the OBDII code P182C mean on a 2017 GMC Sierra?
P182C indicates a high voltage issue in the Internal Mode Switch 'B' circuit, which is part of the transmission range sensor system.
2. What are the common symptoms of the P182C code?
Symptoms may include the transmission stuck in one gear, erratic shifting, a check engine light, or the inability to move the vehicle.
3. What causes the P182C code to appear?
Possible causes include a faulty internal mode switch, damaged wiring or connectors in the circuit, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2017 GMC Sierra with the P182C code?
Driving with this code is not recommended as it can cause transmission performance issues and may lead to further damage.
5. How is the P182C code diagnosed?
A mechanic will use a scan tool to monitor the transmission range sensor data, inspect wiring and connectors, and test the internal mode switch for proper operation.
6. What repairs are typically needed for a P182C code?
Repairs may include replacing the internal mode switch, repairing or replacing damaged wiring, or reprogramming or replacing the TCM if necessary.
7. How much does it cost to fix the P182C code?
Repair costs vary but may range from $150 to $700 depending on the extent of the issue and labor costs.
8. Can a weak battery cause the P182C code?
While unlikely, low voltage from the battery or charging system issues can sometimes affect electrical circuits and should be ruled out.
9. How do I prevent the P182C code from recurring?
Regularly inspect and maintain the transmission wiring and connectors, and address any shifting issues promptly to prevent electrical failures.
10. Does the P182C code require a software update?
In some cases, a TCM software update may be necessary after repairs to ensure proper operation of the transmission system.
Discuss the causes and fixes for P182C 2017 GMC Sierra OBDII Code
Code P182C 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.