P182A 2017 GMC Sierra Code - Internal Mode Switch 'A' Circuit Low Voltage
Quick Answer
The P182A code for a 2017 GMC Sierra indicates an issue with the Internal Mode Switch 'A' Circuit Low Voltage. Common causes include Faulty internal mode switch, Damaged wiring or connectors in the circuit, Malfunctioning transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P182A 2017 GMC Sierra indicates Internal Mode Switch 'A' Circuit Low Voltage.
- Common causes
- Common causes include Faulty internal mode switch, Damaged wiring or connectors in the circuit, Malfunctioning transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P182A 2017 GMC Sierra Description
The P182A code for a 2017 GMC Sierra indicates an issue with the Internal Mode Switch 'A' Circuit Low Voltage. The internal mode switch is a component of the transmission control module that helps to determine the desired gear position based on driver input. In this case, the low voltage detected in the circuit suggests a problem with the electrical signal being sent to the transmission control module.
Common Causes of P182A 2017 GMC Sierra
- Faulty internal mode switch
- Damaged wiring or connectors in the circuit
- Malfunctioning transmission control module
- Low battery voltage affecting the circuit
- Corrosion or moisture in the electrical connections
Symptoms of P182A 2017 GMC Sierra
- Harsh or delayed shifting
- Transmission slipping
- Stuck in a single gear
- Reduced fuel efficiency
- Poor acceleration
How to Fix P182A 2017 GMC Sierra
- Begin by conducting a thorough inspection of the internal mode switch, wiring, and connectors to identify any visible damage or corrosion.
- Test the internal mode switch using a multimeter to check for proper voltage and continuity.
- Inspect the transmission control module for any signs of malfunction and perform a diagnostic scan to retrieve any additional fault codes.
- Replace the internal mode switch if it is found to be faulty, ensuring proper installation and connection.
- Clear the diagnostic trouble codes from the vehicle's system and test drive to confirm that the issue has been resolved.
Cost to Fix P182A 2017 GMC Sierra
The typical repair costs for addressing the Internal Mode Switch 'A' Circuit Low Voltage code on a 2017 GMC Sierra can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary significantly. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing. It's advisable to obtain quotes from multiple sources to get a more accurate estimate for this repair.
Need more information about the P182A 2017 GMC Sierra code?
Need more information on how to fix the P182A 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P182A 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P182A 2017 GMC Sierra Code
1. What does the OBDII code P182A mean on a 2017 GMC Sierra?
P182A indicates a low voltage issue in the Internal Mode Switch 'A' circuit, which is part of the transmission range sensor system responsible for monitoring gear selection.
2. What are the common symptoms of code P182A in a GMC Sierra?
Symptoms may include the transmission not shifting correctly, the vehicle being stuck in one gear, a check engine light, or erratic gear indicator behavior.
3. What causes the P182A code to appear on a 2017 GMC Sierra?
Common causes include a faulty internal mode switch, damaged wiring or connectors in the circuit, corrosion, or a failing transmission control module (TCM).
4. Can driving with the P182A code cause further damage to my 2017 GMC Sierra?
Yes, continuing to drive with this code can lead to transmission damage or unsafe driving conditions due to improper gear selection.
5. How can I diagnose the P182A code on my GMC Sierra?
Begin by checking the wiring and connectors for damage or corrosion. Use a multimeter to test circuit voltage and inspect the internal mode switch for proper function.
6. How do I fix the P182A code on a 2017 GMC Sierra?
Repairs may involve replacing the internal mode switch, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming the transmission control module if necessary.
7. What tools are required to troubleshoot the P182A code?
You’ll need an OBDII scanner, a multimeter, and basic tools to inspect and repair wiring or replace components in the circuit.
8. Is the P182A code specific to GMC Sierra trucks?
No, P182A can appear on other GM vehicles, but the exact symptoms and solutions may vary depending on the make and model.
9. How much does it cost to repair the P182A code on a GMC Sierra?
The cost can range from $100 to $400, depending on whether the issue is a simple wiring repair or requires replacing the internal mode switch.
10. Can a software update fix the P182A code on a 2017 GMC Sierra?
In some cases, reprogramming the transmission control module (TCM) with updated software can resolve the issue if it is related to a software glitch.
Discuss the causes and fixes for P182A 2017 GMC Sierra OBDII Code
Code P182A 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.