P1763 Jeep Code - Governor Pressure Sensor Too High Conditions
Quick Answer
The P1763 code for Jeep vehicles indicates that the Governor Pressure Sensor is detecting pressure levels that are too high. Common causes include Malfunctioning Governor Pressure Sensor, Clogged transmission filter, Faulty transmission pump. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1763 Jeep indicates Governor Pressure Sensor Too High Conditions.
- Common causes
- Common causes include Malfunctioning Governor Pressure Sensor, Clogged transmission filter, Faulty transmission pump.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1763 Jeep Description
The P1763 code for Jeep vehicles indicates that the Governor Pressure Sensor is detecting pressure levels that are too high. The Governor Pressure Sensor is a crucial component of the transmission system that monitors and regulates the hydraulic pressure inside the transmission. When the sensor detects that the pressure is too high, it can lead to various performance issues and potential long-term damage if not addressed promptly.
Common Causes of P1763 Jeep
- Malfunctioning Governor Pressure Sensor
- Clogged transmission filter
- Faulty transmission pump
- Low transmission fluid level
- Contaminated transmission fluid
Symptoms of P1763 Jeep
- Harsh shifting
- Delayed shifting
- Slipping gears
- Transmission overheating
- Check Engine Light illuminated
How to Fix P1763 Jeep
- Diagnose the issue by using a scan tool to retrieve the fault code and inspect the Governor Pressure Sensor for proper operation.
- Check the transmission fluid level and quality, ensuring it is at the correct level and not contaminated.
- Inspect the transmission filter for any clogs or debris, replacing it if necessary.
- Test the transmission pump for proper function and replace if found faulty.
- Clear the fault code after completing the repair and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1763 Jeep
The cost of repairing the Governor Pressure Sensor Too High Conditions code can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of parts for this repair can range from $100 to $300, with labor costs adding an additional $100 to $200. Overall, you can expect to pay anywhere from $200 to $500 for this repair. It's important to note that these are rough estimates, and actual costs may differ based on the factors mentioned above. Be sure to consult with a trusted auto repair shop for a more accurate cost estimate.
Need more information about the P1763 Jeep code?
Need more information on how to fix the P1763 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1763 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1763 Jeep Code
No Frequently Asked Questions about P1763 Jeep Code found.
Discuss the causes and fixes for P1763 Jeep OBDII Code
-
Hook a scanner to my 2003 Jeep gc Laredo..gave code 1763..the over drive light goes on and off along with the transmission temp light...also does not shift...does this sound right for the code??...also when I turn the key on and off 3 times the dash gives the codes p0713 and 1763...but the scanner only gives the 1763.....any answers please or suggestions???
-
Unfortunately I don't have much experience with your vehicle, but I checked a national database of repairs, and according to the database the most common problem for your exact model with the P1763 code is the "Automatic Transmission Governor Pressure Sensor". Unfortunately I don't have an image of the location, but the Governor Pressure Sensor, is part of the Governor Body, which is attached to the Transmission Valve Body inside the transmission. In some rare cases the problem could also be caused by the Transmission Filter.
I found this video online, I hope it helps:
-
I just took my 2002 jeep gc in to the shop to get the throttle relay and cooling fan relay fixed a couple days ago and today I filled up my coolant to fill and now my light is on giving this code.
-
The P1763 is for the Governor Pressure Sensor, which is not related to the Fan Relay or Throttle Relay
-
Did you ever figure this out? My 2004 Jeep gc Laredo has the exact same issues. I'd be curious to know if you found a solution. I figure this is 4 years late but gotta try.
-
On 1999 Grand Cherokee Laredo I had P1762 and 1763 at the same time, appeared after the filter and fluid change. Since the most probable causes are faulty sensor harness or connection, and harness and connections were ok, we changed the sensor. After about 50 miles 1762 showed up again, then after another 20 miles both 62 and 63 are back. I need to mention that after the change it runs and shifts much smoother and less noisy. Sensors are mostly all the same, and made in same place, but with different markings and abviously prices. They differ in o-ring and plastic parts qualty, also visually in materials used. Question: can the gov press. sensor be bench checked somehow? resistance or under power action, so that we can stop the circle of buying, installing new sensors, monkeying 14 bolts, fluid drain, fluid fill, road test? Actually for example on same car you can do it with oil pressure sensor - checking proper resistance on the terminals would prevent from several circles of buying new and installing blindly, only to see yet another failure on road test. Thanks in advance.
-
Took my 1999 jeep grand Cherokee laredo 4.0 into a shop to have the sensors changed out I supplied the new parts from cascade transmission in Oregon these are the upgraded ones now got 2 codes p1763 an p0783 had p0783 before fixed that now it's back taking it back having shop look at it again they must have missed or didn't do something right but they want me to pay for them to fix whatever they did or didn't do could it have been a bad sensor or something else
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.