P1743 GMC Code - Throttle Position Invalid Signal
Quick Answer
When the diagnostic code P1743 GMC appears, it indicates that there is an issue with the throttle position sensor sending an invalid signal to the engine control module (ECM). Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the throttle position sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1743 GMC indicates Throttle Position Invalid Signal.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the throttle position sensor circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1743 GMC Description
When the diagnostic code P1743 GMC appears, it indicates that there is an issue with the throttle position sensor sending an invalid signal to the engine control module (ECM). The throttle position sensor is a crucial component that monitors the position of the throttle valve and informs the ECM about the amount of air entering the engine. This information is used by the ECM to adjust the air-fuel mixture for optimal engine performance.
Common Causes of P1743 GMC
- Faulty throttle position sensor
- Damaged wiring or connectors in the throttle position sensor circuit
- Malfunctioning ECM
- Poor electrical connections or grounds
- Environmental factors like moisture or corrosion affecting sensor performance
Symptoms of P1743 GMC
- Rough idling or erratic engine behavior
- Poor acceleration or lack of power
- Stalling or difficulty starting the engine
- Check Engine Light illuminated on the dashboard
- Limp mode activation, limiting the vehicle's speed
How to Fix P1743 GMC
- Perform a thorough diagnostic scan to confirm the presence of the P1743 code and identify the exact cause of the issue.
- Inspect the throttle position sensor, wiring, and connectors for any signs of damage or wear.
- Test the throttle position sensor for proper functionality using a multimeter or scan tool.
- Replace the throttle position sensor if it is found to be faulty.
- Clear the code from the ECM memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P1743 GMC
The typical repair costs for addressing the P1743 GMC code can vary depending on the specific cause of the issue. In general, replacing a faulty throttle position sensor can cost between $100 and $300, including parts and labor. However, if additional repairs or diagnostics are required, the total cost may increase. Keep in mind that labor rates at auto repair shops can vary based on location, vehicle make and model, and engine type, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P1743 GMC code?
Need more information on how to fix the P1743 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1743 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1743 GMC Code
1. What does the OBDII code P1743 mean for a GMC vehicle?
P1743 indicates an "Invalid Throttle Position Signal," meaning the transmission control module is receiving an unexpected or incorrect signal from the throttle position sensor (TPS).
2. What are the common symptoms of a P1743 code in GMC vehicles?
Symptoms may include poor acceleration, erratic shifting, transmission slipping, reduced fuel efficiency, or the Check Engine Light being illuminated.
3. What causes the P1743 code to appear on GMC vehicles?
Common causes include a faulty throttle position sensor (TPS), damaged wiring or connectors, issues with the transmission control module, or incorrect calibration of the TPS.
4. Can a faulty throttle position sensor cause transmission problems?
Yes, a faulty TPS can send incorrect signals to the transmission control module, leading to shifting issues and triggering the P1743 code.
5. How do I diagnose a P1743 code on my GMC vehicle?
Start by scanning for additional codes, inspecting the throttle position sensor and its wiring, checking for loose connections, and testing the TPS voltage with a multimeter.
6. Is it safe to drive a GMC vehicle with a P1743 code?
Driving with this code is not recommended, as it can cause transmission issues, poor performance, and potential damage if left unresolved.
7. Can a software issue cause the P1743 code in a GMC vehicle?
Yes, a software glitch in the transmission control module may occasionally cause this code. Updating or reprogramming the module may resolve the issue.
8. How can I fix a P1743 code on my GMC vehicle?
Repairs may include replacing the throttle position sensor, repairing damaged wiring, cleaning corroded connectors, or recalibrating the TPS.
9. How much does it cost to repair a P1743 code on a GMC vehicle?
The cost depends on the specific repair, but replacing a TPS typically costs $100–$300, while wiring repairs or module programming may vary.
10. Can a dirty throttle body trigger the P1743 code?
Yes, a dirty or obstructed throttle body can cause erratic TPS signals, potentially leading to a P1743 code. Cleaning the throttle body may help resolve the issue.
Discuss the causes and fixes for P1743 GMC OBDII Code
Code P1743 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.