P1733 Chrysler Code - 4C Pressure Switch Sense Circuit
Quick Answer
The P1733 Chrysler code refers to the 4C Pressure Switch Sense Circuit. Common causes include Faulty pressure switch sensor, Wiring issues in the sensor circuit, Electrical faults in the transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1733 Chrysler indicates 4C Pressure Switch Sense Circuit.
- Common causes
- Common causes include Faulty pressure switch sensor, Wiring issues in the sensor circuit, Electrical faults in the transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1733 Chrysler Description
The P1733 Chrysler code refers to the 4C Pressure Switch Sense Circuit. This code indicates that there is a problem with the pressure switch sensor circuit in the transmission system of a Chrysler vehicle. The pressure switch sensor is responsible for monitoring the hydraulic pressure within the transmission system and sending signals to the vehicle's onboard computer. This information is crucial for the proper operation of the transmission, as it helps to ensure smooth shifting and overall performance.
Common Causes of P1733 Chrysler
- Faulty pressure switch sensor
- Wiring issues in the sensor circuit
- Electrical faults in the transmission control module
- Transmission fluid leaks
- Overheating of the transmission
Symptoms of P1733 Chrysler
- Erratic shifting
- Harsh gear changes
- Delayed engagement
- Transmission slipping
- Transmission failure
How to Fix P1733 Chrysler
- Begin by conducting a thorough diagnostic scan to retrieve the fault codes and pinpoint the issue.
- Inspect the pressure switch sensor and its wiring for any signs of damage or corrosion.
- Test the pressure switch sensor using a multimeter to determine if it is functioning correctly.
- Replace the pressure switch sensor if it is found to be faulty, ensuring proper installation and connection.
- Clear the fault codes from the vehicle's computer and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P1733 Chrysler
The typical repair costs for addressing the P1733 Chrysler code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of replacing a pressure switch sensor can range from $150 to $300, including parts and labor. Additional costs may be incurred if there are wiring issues or other underlying problems that need to be addressed. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is recommended to check with local shops for a more accurate estimate.
Need more information about the P1733 Chrysler code?
Need more information on how to fix the P1733 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1733 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1733 Chrysler Code
1. What does the OBDII code P1733 mean on a Chrysler?
The P1733 code indicates an issue with the 4C Pressure Switch Sense Circuit, which is part of the transmission system used to monitor hydraulic pressure.
2. What are the common symptoms of the P1733 code in a Chrysler?
Symptoms may include erratic shifting, the transmission stuck in limp mode, delayed gear engagement, or the illumination of the check engine light.
3. What causes the P1733 code to appear in a Chrysler vehicle?
Common causes include a faulty 4C pressure switch, wiring or connector issues in the pressure switch circuit, or a malfunction in the transmission control module (TCM).
4. Can I drive my Chrysler with a P1733 code?
While it may be possible to drive, continuing to do so could worsen transmission issues. It’s best to address the problem promptly to avoid further damage.
5. How can I diagnose the P1733 code on my Chrysler?
Start by checking the wiring and connectors for damage or corrosion. Then, test the 4C pressure switch and inspect the transmission fluid for proper level and condition.
6. How do I fix the P1733 code in a Chrysler?
Repairs may include replacing the 4C pressure switch, repairing or replacing damaged wiring, or reprogramming or replacing the TCM if necessary.
7. Does the P1733 code require a transmission replacement?
Not necessarily. The issue is often related to the 4C pressure switch or its circuit, which can usually be repaired without replacing the entire transmission.
8. Can low transmission fluid cause the P1733 code?
Yes, low or contaminated transmission fluid can affect hydraulic pressure and trigger this code. Always check and maintain proper fluid levels.
9. How much does it cost to fix the P1733 code in a Chrysler?
The repair cost varies based on the root cause but can range from $100 for minor wiring repairs to $500 or more for a pressure switch or TCM replacement.
10. Can a faulty TCM cause the P1733 code?
Yes, a malfunctioning Transmission Control Module (TCM) can incorrectly interpret pressure switch signals and trigger the P1733 code.
Discuss the causes and fixes for P1733 Chrysler OBDII Code
Code P1733 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.