Engine-Codes - Ford - P1703 2003 FORD F150

P1703 2003 FORD F150 Code - Brake Switch Out of Self-Test Range

- Code Popularity: 4,521 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 2/3
Table of contents

|What are the Possible Causes of the P1703 2003 FORD F150 Code?

  • Brake Pedal Position Switch harness is open or shorted
  • Brake Pedal Position Switch circuit poor electrical connection
  • Damage Brake Switch
  • Misadjusted Brake Switch

|How to Fix the P1703 2003 FORD F150 Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P1703 2003 FORD F150 code tech notes

Check for correct function of the stop lamps, if the stop lamps are not working change the brake switch.

|What is the cost to diagnose the P1703 2003 FORD F150 code?

Labor: 1.0

The cost to diagnose the P1703 2003 FORD F150 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P1703 2003 FORD F150 code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Cruise Control System Inoperative

|What Does the P1703 2003 FORD F150 Code Mean?

Indicates that during the Key On Engine Off (KOEO) self-test, the Brake Pedal Position (BPD) signal was high, or during the Key ON Engine Running (KOER) self-test, the BPP signal di not cycle high and low.

Brake Switch Out of Self-Test Range

|Need more information with the P1703 2003 FORD F150 code?

Need more information on how to fix the P1703 2003 FORD F150 code?
Get Access to Factory Service Manuals

|Need help with a P1703 2003 FORD F150 code?

Get the p1703 2003 ford f150 code diagnosed by a professional: Find a repair shop in your area