P1702 Subaru Code - Automatic Transmission Diagnosis Signal Voltage Low
Quick Answer
The P1702 code for Subaru vehicles indicates that there is a low voltage signal detected in the automatic transmission diagnosis system. Common causes include Faulty transmission control module, Wiring issues or damaged connectors, Low transmission fluid levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1702 Subaru indicates Automatic Transmission Diagnosis Signal Voltage Low.
- Common causes
- Common causes include Faulty transmission control module, Wiring issues or damaged connectors, Low transmission fluid levels.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1702 Subaru Description
The P1702 code for Subaru vehicles indicates that there is a low voltage signal detected in the automatic transmission diagnosis system. This can potentially lead to issues with the transmission's performance and overall functionality. The automatic transmission diagnosis signal is crucial for the proper operation of the transmission system, as it helps monitor various parameters and ensure smooth shifting and optimal performance. When the voltage of this signal is low, it can disrupt the communication between the transmission control module and other components, leading to potential transmission problems.
Common Causes of P1702 Subaru
- Faulty transmission control module
- Wiring issues or damaged connectors
- Low transmission fluid levels
- Malfunctioning sensors
- Electrical problems within the transmission system
Symptoms of P1702 Subaru
- Delayed or harsh shifting
- Transmission slipping
- Inability to shift gears
- Illumination of the Check Engine Light
- Reduced fuel efficiency
How to Fix P1702 Subaru
- Begin by conducting a thorough inspection of the transmission system to identify any visible damage or loose connections.
- Check the transmission fluid levels and quality, topping up or replacing as needed.
- Test and potentially replace any faulty sensors or components within the transmission system.
- Inspect the wiring harness for any signs of damage or corrosion, repairing or replacing as necessary.
- If the issue persists, consider seeking professional help to diagnose and repair any underlying transmission control module problems.
Cost to Fix P1702 Subaru
The cost of repairing a P1702 code on a Subaru vehicle can vary depending on the specific cause of the issue. In general, the repair costs for this type of problem can range from $200 to $800, including parts and labor. However, it's important to note that labor rates at auto repair shops can vary significantly, with hourly rates typically falling between $80 and $150. Additionally, the final cost may also be influenced by factors such as the location of the repair shop, the vehicle's make and model, and the extent of the repairs needed. It's recommended to obtain quotes from multiple repair shops to ensure a competitive price.
Need more information about the P1702 Subaru code?
Need more information on how to fix the P1702 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1702 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1702 Subaru Code
1. What are the common symptoms of OBDII code P1702 (Subaru) indicating Automatic Transmission Diagnosis Signal Voltage Low?
- Common symptoms include transmission shifting issues, engine stalling, and the transmission going into limp mode.
2. What are the possible causes of OBDII code P1702 (Subaru) related to Automatic Transmission Diagnosis Signal Voltage Low?
- Possible causes may include a faulty transmission control module (TCM), damaged wiring or connectors, low battery voltage, or a defective TCM power supply.
3. How can I diagnose OBDII code P1702 (Subaru) indicating Automatic Transmission Diagnosis Signal Voltage Low?
- Diagnose the code by checking the TCM for any visible damage, testing the voltage at the TCM, inspecting the wiring and connectors for corrosion or damage, and scanning for any additional trouble codes.
4. Are there any DIY repair tips for fixing OBDII code P1702 (Subaru) related to Automatic Transmission Diagnosis Signal Voltage Low?
- DIY repair tips may include checking and repairing any damaged wiring or connectors, ensuring the battery voltage is within the proper range, and resetting the TCM by disconnecting the battery for a few minutes.
5. Can a low battery voltage cause OBDII code P1702 (Subaru) to trigger for Automatic Transmission Diagnosis Signal Voltage Low?
- Yes, low battery voltage can be a common cause of this code as it may affect the TCM's ability to function properly and maintain the correct voltage levels.
6. What role does the transmission control module (TCM) play in triggering OBDII code P1702 (Subaru) for Automatic Transmission Diagnosis Signal Voltage Low?
- The TCM is responsible for monitoring and controlling the transmission's operation, and if it detects a low voltage signal, it can trigger the P1702 code to indicate a potential issue.
7. Is it safe to continue driving with OBDII code P1702 (Subaru) triggered for Automatic Transmission Diagnosis Signal Voltage Low?
- It is not recommended to continue driving with this code triggered, as it can lead to further transmission issues and potential safety hazards. It is best to address the underlying problem promptly.
8. Can resetting the OBDII system clear the P1702 code related to Automatic Transmission Diagnosis Signal Voltage Low in a Subaru?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the low voltage signal is not resolved, the code is likely to reappear.
9. How can a professional mechanic help in diagnosing and repairing OBDII code P1702 (Subaru) for Automatic Transmission Diagnosis Signal Voltage Low?
- A professional mechanic can use specialized diagnostic tools to pinpoint the exact cause of the code, perform thorough inspections, and make accurate repairs to ensure the issue is resolved effectively.
10. Are there any recalls or service bulletins related to OBDII code P1702 (Subaru) and Automatic Transmission Diagnosis Signal Voltage Low?
- It is recommended to check with Subaru dealerships or online resources for any recalls or service bulletins specific to this code to see if there are known issues or solutions provided by the manufacturer.
Discuss the causes and fixes for P1702 Subaru OBDII Code
Code P1702 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.