P16E8 2016 GMC Sierra Code - Engine Controls Ignition Relay Signal Message Counter Incorrect
Quick Answer
The P16E8 diagnostic trouble code for a 2016 GMC Sierra indicates that the Engine Controls Ignition Relay Signal Message Counter is incorrect. Common causes include Faulty ignition relay, Wiring issues or poor connections, Malfunctioning engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16E8 2016 GMC Sierra indicates Engine Controls Ignition Relay Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty ignition relay, Wiring issues or poor connections, Malfunctioning engine control module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P16E8 2016 GMC Sierra Description
The P16E8 diagnostic trouble code for a 2016 GMC Sierra indicates that the Engine Controls Ignition Relay Signal Message Counter is incorrect. This code typically points to an issue with the communication between the engine control module (ECM) and the ignition relay. The ECM sends signals to the ignition relay to control the ignition system's operation, which is crucial for the engine to start and run efficiently.
Common Causes of P16E8 2016 GMC Sierra
- Faulty ignition relay
- Wiring issues or poor connections
- Malfunctioning engine control module (ECM)
- Electrical system problems
- Corrosion or damage to components
Symptoms of P16E8 2016 GMC Sierra
- Engine starting difficulties
- Rough idling or unstable engine operation
- Misfires or hesitation during acceleration
- Engine stalling
- Check Engine Light illuminated on the dashboard
How to Fix P16E8 2016 GMC Sierra
- Begin by conducting a thorough inspection of the ignition relay, wiring, and connections to identify any visible signs of damage or corrosion.
- Test the ignition relay using a multimeter to check for proper functionality. Replace the relay if it is found to be faulty.
- Inspect the wiring harness for any frayed wires or loose connections. Repair or replace damaged wiring as needed.
- Perform a diagnostic scan to reset the ECM and clear the trouble code. Monitor the system for any reoccurrence of the code.
- If the issue persists, consider seeking professional assistance from a certified mechanic or dealership for further diagnosis and potential ECM replacement if necessary.
Cost to Fix P16E8 2016 GMC Sierra
The typical repair costs for addressing the P16E8 code on a 2016 GMC Sierra can vary depending on the exact cause of the issue. In general, replacing a faulty ignition relay can cost anywhere from $50 to $200, while repairing or replacing damaged wiring may range from $100 to $300. If the ECM needs to be replaced, this can significantly increase the repair costs, potentially ranging from $500 to $1000 or more.
Need more information about the P16E8 2016 GMC Sierra code?
Need more information on how to fix the P16E8 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16E8 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16E8 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code P16E8 in a 2016 GMC Sierra?
- Common symptoms include rough idling, engine misfires, poor acceleration, and the check engine light being illuminated.
2. What does the OBDII code P16E8 "Engine Controls Ignition Relay Signal Message Counter Incorrect" mean in a 2016 GMC Sierra?
- This code indicates that the engine control module has detected an incorrect message counter from the ignition relay signal.
3. What are the possible causes of OBDII code P16E8 in a 2016 GMC Sierra?
- Possible causes include a faulty ignition relay, wiring issues, a malfunctioning engine control module, or software glitches.
4. How can I diagnose the OBDII code P16E8 in my 2016 GMC Sierra?
- Diagnosing this code typically involves checking the ignition relay, inspecting the wiring for any damage, and performing a thorough scan of the engine control module.
5. Can I drive my 2016 GMC Sierra with the OBDII code P16E8 present?
- It is not recommended to drive the vehicle with this code present, as it can lead to further engine problems and potential safety issues.
6. How can I repair OBDII code P16E8 in my 2016 GMC Sierra?
- Repairing this code may involve replacing the faulty ignition relay, repairing any damaged wiring, resetting the engine control module, or updating the software.
7. Is it possible to reset the OBDII code P16E8 in a 2016 GMC Sierra without repairs?
- While clearing the code may temporarily turn off the check engine light, it is important to address the underlying issue to prevent further problems.
8. How much does it cost to fix OBDII code P16E8 in a 2016 GMC Sierra?
- The cost of fixing this code can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars.
9. Can a DIY enthusiast repair OBDII code P16E8 in a 2016 GMC Sierra?
- Depending on the skill level and tools available, some DIY enthusiasts may be able to diagnose and repair this code, particularly if it involves simple tasks like replacing the ignition relay.
10. How long does it take to repair OBDII code P16E8 in a 2016 GMC Sierra?
- The repair time can vary based on the cause of the issue and the availability of parts, but it may take a few hours to a day to fully address the problem.
Discuss the causes and fixes for P16E8 2016 GMC Sierra OBDII Code
Code P16E8 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.