P16E5 2016 GMC Sierra Code - Sensor Communication Circuit 3 High Voltage
Quick Answer
The P16E5 diagnostic trouble code (DTC) indicates that there is a high voltage condition detected in sensor communication circuit 3 in a 2016 GMC Sierra. Common causes include Damaged wiring or connectors in the sensor communication circuit, Faulty sensor, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16E5 2016 GMC Sierra indicates Sensor Communication Circuit 3 High Voltage.
- Common causes
- Common causes include Damaged wiring or connectors in the sensor communication circuit, Faulty sensor, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P16E5 2016 GMC Sierra Description
The P16E5 diagnostic trouble code (DTC) indicates that there is a high voltage condition detected in sensor communication circuit 3 in a 2016 GMC Sierra. This code is typically related to an issue with the sensor communication circuit, which is responsible for transmitting data between various sensors and the vehicle's engine control module (ECM). The high voltage reading suggests that there is an electrical fault or malfunction in the circuit, causing the voltage to exceed the normal operating range.
Common Causes of P16E5 2016 GMC Sierra
- Damaged wiring or connectors in the sensor communication circuit
- Faulty sensor
- Malfunctioning ECM
- Software glitch in the vehicle's system
- Electrical interference or short circuits
Symptoms of P16E5 2016 GMC Sierra
- Rough idling
- Hesitation or lack of acceleration
- Stalling
- Decreased fuel efficiency
- Check engine light illuminated on the dashboard
How to Fix P16E5 2016 GMC Sierra
- Begin by conducting a visual inspection of the sensor communication circuit, looking for any visible damage to wiring or connectors.
- Use a multimeter to test the voltage levels in the circuit, comparing them to the manufacturer's specifications.
- Test each sensor connected to circuit 3 to determine if any are faulty and need replacement.
- Check the ECM for any signs of malfunction or software glitches, and perform any necessary reprogramming.
- Clear the DTC and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P16E5 2016 GMC Sierra
The typical repair costs for addressing a P16E5 DTC in a 2016 GMC Sierra can vary depending on the specific cause of the issue. In general, you can expect to pay anywhere from $100 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check with local shops for a more accurate estimate.
Need more information about the P16E5 2016 GMC Sierra code?
Need more information on how to fix the P16E5 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16E5 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16E5 2016 GMC Sierra Code
1. What does OBDII code P16E5 mean on a 2016 GMC Sierra?
P16E5 indicates a "Sensor Communication Circuit 3 High Voltage" issue, meaning there is an abnormal high voltage signal detected in a specific sensor communication circuit.
2. What are the common symptoms of code P16E5 on a 2016 GMC Sierra?
Symptoms may include a check engine light, poor engine performance, erratic behavior of related systems, or reduced fuel efficiency.
3. What causes the P16E5 code to appear on a GMC Sierra?
Common causes include faulty wiring, damaged connectors, a malfunctioning sensor, or an issue with the engine control module (ECM).
4. Can a loose connection cause the P16E5 code?
Yes, loose or corroded connectors in the sensor communication circuit can cause a high voltage reading and trigger the code.
5. How is the P16E5 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the wiring and connectors for damage or corrosion, and test the sensor and ECM for proper operation.
6. Can I drive my 2016 GMC Sierra with the P16E5 code?
Driving with this code is not recommended as it may lead to further damage or reduced performance, depending on the affected system.
7. How can the P16E5 code be fixed on a GMC Sierra?
Repairs may include replacing a faulty sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming the ECM.
8. Is the P16E5 code specific to one sensor or circuit?
The P16E5 code refers to "Sensor Communication Circuit 3," which means it is specific to a particular communication circuit or sensor in the system.
9. How much does it cost to fix the P16E5 code on a GMC Sierra?
Repair costs vary depending on the issue but typically range from $100 for minor wiring repairs to $500 or more for sensor or ECM replacement.
10. Can the P16E5 code be cleared without repairs?
Clearing the code without addressing the underlying issue may temporarily turn off the check engine light, but the code will likely return.
Discuss the causes and fixes for P16E5 2016 GMC Sierra OBDII Code
Code P16E5 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.