P16E4 2014 GMC Sierra Code - Sensor Communication Circuit 3 Low Voltage
Quick Answer
The P16E4 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the Sensor Communication Circuit 3, specifically low voltage. Common causes include Faulty sensor, Damaged wiring or connectors, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16E4 2014 GMC Sierra indicates Sensor Communication Circuit 3 Low Voltage.
- Common causes
- Common causes include Faulty sensor, Damaged wiring or connectors, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P16E4 2014 GMC Sierra Description
The P16E4 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the Sensor Communication Circuit 3, specifically low voltage. This code typically points to a problem with the communication between a sensor and the vehicle's electronic control module (ECM). In this case, Circuit 3 refers to a specific sensor or group of sensors in the vehicle's system. When the voltage level is below the expected range, it can lead to various performance issues and potentially affect the overall functionality of the vehicle.
Common Causes of P16E4 2014 GMC Sierra
- Faulty sensor
- Damaged wiring or connectors
- Malfunctioning ECM
- Power supply issues to the sensor
Symptoms of P16E4 2014 GMC Sierra
- Reduced fuel efficiency
- Rough idling or engine misfires
- Hesitation or lack of power during acceleration
- Stalling or difficulty starting the vehicle
How to Fix P16E4 2014 GMC Sierra
- Begin by conducting a thorough inspection of the sensor communication circuit, including the sensor, wiring, connectors, and ECM.
- Test the voltage levels at the sensor to determine if it falls below the specified range.
- Replace the sensor if it is found to be faulty, ensuring proper installation and connection.
- Check for any damaged wiring or connectors and repair or replace them as needed.
- Clear the DTC from the vehicle's memory using a diagnostic scan tool and perform a test drive to confirm that the issue has been resolved.
Cost to Fix P16E4 2014 GMC Sierra
The typical repair costs for addressing a Sensor Communication Circuit 3 Low Voltage issue can vary depending on the specific cause of the problem and the parts and labor required for the repair. In general, the cost of replacing a sensor and addressing related wiring or connector issues can range from $200 to $500 or more. Labor rates at auto repair shops typically range from $80 to $150 per hour, but rates may vary based on location, vehicle make and model, and the complexity of the repair. It's recommended to obtain a detailed estimate from a qualified mechanic or repair shop to determine the precise cost for resolving the P16E4 DTC on a 2014 GMC Sierra.
Need more information about the P16E4 2014 GMC Sierra code?
Need more information on how to fix the P16E4 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16E4 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16E4 2014 GMC Sierra Code
1. What does the OBDII code P16E4 mean on a 2014 GMC Sierra?
The code P16E4 indicates a "Sensor Communication Circuit 3 Low Voltage" issue, meaning the circuit is not receiving the expected voltage from a specific sensor.
2. What are the symptoms of code P16E4 on a 2014 GMC Sierra?
Common symptoms include a check engine light, reduced engine performance, erratic transmission behavior, or difficulty starting the vehicle.
3. What causes the P16E4 code on a 2014 GMC Sierra?
Possible causes include a faulty sensor, damaged wiring, a poor electrical connection, or a malfunctioning engine control module (ECM).
4. How do I diagnose the P16E4 code on my GMC Sierra?
Start by using a scan tool to confirm the code, then inspect the wiring and connectors for damage or corrosion. Test the sensor for proper operation and check for voltage at the circuit.
5. Can I drive my 2014 GMC Sierra with the P16E4 code?
Driving with this code is not recommended, as it may lead to reduced performance or further damage to the vehicle's systems.
6. How do I fix the P16E4 code on a GMC Sierra?
Repairs may include replacing the faulty sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the ECM if necessary.
7. What sensor is typically associated with the P16E4 code on a 2014 GMC Sierra?
The specific sensor depends on the vehicle configuration but may include components like a throttle position sensor or a transmission sensor.
8. What tools are needed to repair the P16E4 code?
You’ll typically need a scan tool, multimeter, wiring diagrams, and basic hand tools for inspection and repairs.
9. Is the P16E4 code covered under warranty for a 2014 GMC Sierra?
It depends on the vehicle's warranty status and terms. Check with your dealership or refer to your warranty documentation.
10. Can a loose connector cause the P16E4 code on my GMC Sierra?
Yes, a loose or corroded connector can disrupt voltage flow and trigger the P16E4 code. Inspect all connections in the affected circuit.
Discuss the causes and fixes for P16E4 2014 GMC Sierra OBDII Code
Code P16E4 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.