P16A2 2016 GMC Sierra Code - Throttle Position Sensor Communication Circuit Performance
Quick Answer
The P16A2 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates an issue with the Throttle Position Sensor (TPS) communication circuit performance. Common causes include Faulty Throttle Position Sensor, Wiring or connector issues in the TPS circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16A2 2016 GMC Sierra indicates Throttle Position Sensor Communication Circuit Performance.
- Common causes
- Common causes include Faulty Throttle Position Sensor, Wiring or connector issues in the TPS circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P16A2 2016 GMC Sierra Description
The P16A2 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates an issue with the Throttle Position Sensor (TPS) communication circuit performance. The TPS is a crucial component of the vehicle's electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). The ECM uses this data to adjust the air-fuel mixture and control the engine's performance.
Common Causes of P16A2 2016 GMC Sierra
- Faulty Throttle Position Sensor
- Wiring or connector issues in the TPS circuit
- ECM malfunction
- Corrosion or contamination in the TPS circuit
- Poor electrical connections
Symptoms of P16A2 2016 GMC Sierra
- Erratic throttle response
- Engine stalling or hesitation
- Rough idling or surging
- Decreased fuel efficiency
- Engine misfires
How to Fix P16A2 2016 GMC Sierra
- Begin by conducting a thorough inspection of the TPS wiring and connectors to check for any visible damage or corrosion. Repair or replace any damaged components.
- Test the Throttle Position Sensor using a multimeter to ensure it is functioning within the manufacturer's specified parameters. Replace the TPS if necessary.
- Clear the DTC from the ECM using a diagnostic scan tool and perform a throttle relearn procedure to recalibrate the TPS.
- Test drive the vehicle to verify that the symptoms associated with the P16A2 code have been resolved. Monitor the TPS readings to ensure they are accurate and stable.
Cost to Fix P16A2 2016 GMC Sierra
The typical repair costs for addressing a Throttle Position Sensor communication circuit performance issue can vary depending on the extent of the problem and the specific components that require replacement. In general, the cost of replacing a faulty TPS and addressing related wiring or connector issues can range from $150 to $300 for parts. Labor costs can add an additional $100 to $200, with total repair costs falling between $250 and $500. It is important to note that diagnostic time and labor rates at auto repair shops can vary, so it is advisable to obtain quotes from multiple sources to ensure an accurate estimate.
Need more information about the P16A2 2016 GMC Sierra code?
Need more information on how to fix the P16A2 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16A2 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16A2 2016 GMC Sierra Code
1. What does the OBDII code P16A2 mean on a 2016 GMC Sierra?
P16A2 indicates a problem with the Throttle Position Sensor (TPS) communication circuit, specifically related to its performance.
2. What are the common symptoms of code P16A2?
Symptoms may include reduced engine performance, poor throttle response, the Check Engine Light turning on, and the vehicle entering limp mode.
3. What causes code P16A2 on a 2016 GMC Sierra?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the TPS circuit, or a malfunctioning engine control module (ECM).
4. Can I drive my 2016 GMC Sierra with the P16A2 code?
Driving is possible but not recommended, as reduced engine performance or throttle response can lead to unsafe driving conditions.
5. How do I diagnose code P16A2?
Start by inspecting the TPS wiring and connectors for damage, checking for loose connections, and testing the sensor with a multimeter. Use a scan tool to monitor TPS signal data.
6. How do I fix code P16A2 on a GMC Sierra?
Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to repair code P16A2?
Repair costs can vary, but replacing a TPS typically ranges from $100 to $300, including parts and labor. ECM replacement may cost significantly more.
8. Can a dirty throttle body cause code P16A2?
While unlikely, a dirty throttle body can cause similar symptoms. Cleaning it may help but is not a definitive fix for P16A2.
9. Is code P16A2 related to other throttle-related codes?
Yes, it may appear alongside other TPS or throttle body codes, as they all involve the same system.
10. Do I need to clear the code after repairs?
Yes, after completing repairs, clear the code with an OBDII scanner and test drive the vehicle to ensure the issue is resolved.
Discuss the causes and fixes for P16A2 2016 GMC Sierra OBDII Code
Code P16A2 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.