P1687 Buick Code - Fuel Injector Control Module Driver Stuck On
Quick Answer
The P1687 Buick code indicates that the Fuel Injector Control Module (FICM) driver is stuck on, meaning that the control module responsible for managing fuel injection is continuously sending signals to the fuel injectors, even when they should be off. Common causes include Faulty Fuel Injector Control Module (FICM): The FICM may be malfunctioning due to internal issues or electrical faults, Wiring issues: There could be wiring harness problems, such as shorts or open circuits, affecting the FICM, Corrosion: Corrosion on the FICM connectors or terminals can disrupt the signals being sent to the fuel injectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1687 Buick indicates Fuel Injector Control Module Driver Stuck On.
- Common causes
- Common causes include Faulty Fuel Injector Control Module (FICM): The FICM may be malfunctioning due to internal issues or electrical faults, Wiring issues: There could be wiring harness problems, such as shorts or open circuits, affecting the FICM, Corrosion: Corrosion on the FICM connectors or terminals can disrupt the signals being sent to the fuel injectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1687 Buick Description
The P1687 Buick code indicates that the Fuel Injector Control Module (FICM) driver is stuck on, meaning that the control module responsible for managing fuel injection is continuously sending signals to the fuel injectors, even when they should be off. This can lead to a variety of performance issues and potential damage to the vehicle if not addressed promptly. The FICM is a crucial component in the fuel injection system, as it controls the timing and amount of fuel being injected into the engine cylinders. When the driver is stuck on, it can result in an incorrect fuel mixture, poor fuel economy, rough idling, and overall reduced engine performance.
Common Causes of P1687 Buick
- Faulty Fuel Injector Control Module (FICM): The FICM may be malfunctioning due to internal issues or electrical faults.
- Wiring issues: There could be wiring harness problems, such as shorts or open circuits, affecting the FICM.
- Corrosion: Corrosion on the FICM connectors or terminals can disrupt the signals being sent to the fuel injectors.
- Software issues: Software glitches or programming errors in the FICM can cause the driver to be stuck on.
- Environmental factors: Exposure to extreme temperatures or moisture can damage the FICM and lead to this issue.
Symptoms of P1687 Buick
- Rough idling: The engine may run unevenly or erratically at idle.
- Decreased fuel efficiency: The vehicle may experience a decrease in fuel economy.
- Engine misfires: The engine may misfire or run rough under acceleration.
- Check engine light: The check engine light may illuminate on the dashboard.
- Difficulty starting: The vehicle may have difficulty starting or may not start at all.
How to Fix P1687 Buick
- Diagnose the issue: Use a diagnostic scanner to retrieve the trouble codes and pinpoint the problem with the FICM.
- Inspect wiring and connectors: Check the wiring harness and connectors for any signs of damage, corrosion, or poor connections.
- Test the FICM: Test the Fuel Injector Control Module to determine if it is functioning correctly or needs to be replaced.
- Replace the FICM: If the FICM is found to be faulty, replace it with a new one and ensure proper programming and calibration.
- Clear codes and test drive: Clear the trouble codes, reset the engine control module, and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P1687 Buick
The cost of repairing a Fuel Injector Control Module driver stuck on issue can vary depending on the make and model of the vehicle, the severity of the problem, and the labor rates in your area. On average, the cost of replacing a Fuel Injector Control Module can range from $300 to $800, including parts and labor. Additional costs may apply if other components need to be replaced or if further diagnosis is required. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your specific situation.
Need more information about the P1687 Buick code?
Need more information on how to fix the P1687 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1687 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1687 Buick Code
No Frequently Asked Questions about P1687 Buick Code found.
Discuss the causes and fixes for P1687 Buick OBDII Code
Code P1687 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.