Engine-Codes - Honda - P1683 2009 HONDA ACCORD

P1683 2009 HONDA ACCORD Code - Throttle Valve Default Position Spring Performance Problem

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What is this?
Table of contents

|P1683 2009 HONDA ACCORD code possible causes

  • Dirty throttle body
  • Throttle body harness is open or shorted
  • Throttle body circuit poor electrical connection
  • Faulty throttle body

|How is the P1683 2009 HONDA ACCORD code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P1683 2009 HONDA ACCORD code

Labor: 1.0

The cost to diagnose the P1683 2009 HONDA ACCORD code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P1683 2009 HONDA ACCORD code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What is P1683 2009 HONDA ACCORD code meaning?

The electronic throttle control system controls the throttle valve opening. The system is composed of the throttle actuator, the throttle valve, throttle position (TP) sensors A and B, the throttle actuator control module, the throttle actuator control module relay, the accelerator pedal position (APP) sensor, and the Engine Control Module (ECM).
The APP sensor is operated via the throttle cable to determine the accelerator opening value when the driver presses the accelerator pedal. The accelerator pedal opening value is converted to a signal in the APP sensor and transmitted to the ECM to compute the target position. The target position signal is then transmitted to the throttle actuator control module.
The throttle actuator control module determines the throttle valve target position according to the signal received and operates the throttle actuator to move the throttle valve to the target position. The actual throttle valve position is determined by TP sensor A installed in the throttle body.
The throttle actuator control module compares the throttle valve target opening angle and the actual throttle valve opening angle from TP sensor A, and when the difference exceeds the specification, the throttle actuator control module transmits the malfunction data to the ECM. When the ECM receives the malfunction data from the throttle actuator control module,the ECM detects the malfunction of the throttle actuator system and a DTC is stored.

|Need more information with the P1683 2009 HONDA ACCORD code?

Need more information on how to fix the P1683 2009 HONDA ACCORD code?
Get Access to Factory Service Manuals

|Need help with a P1683 2009 HONDA ACCORD code?

Get the P1683 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area