P167F 2018 GMC Sierra Code - Battery Voltage Signal Message Counter Incorrect
Quick Answer
The P167F diagnostic trouble code for a 2018 GMC Sierra indicates that the Battery Voltage Signal Message Counter is incorrect. Common causes include Faulty battery, Loose or corroded battery terminals, Wiring or connection issues in the battery system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P167F 2018 GMC Sierra indicates Battery Voltage Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty battery, Loose or corroded battery terminals, Wiring or connection issues in the battery system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P167F 2018 GMC Sierra Description
The P167F diagnostic trouble code for a 2018 GMC Sierra indicates that the Battery Voltage Signal Message Counter is incorrect. This means that the Engine Control Module (ECM) has detected a discrepancy in the number of voltage signal messages being received from the battery system. The ECM continuously monitors the voltage levels in the vehicle's electrical system to ensure proper functioning and prevent any potential damage.
Common Causes of P167F 2018 GMC Sierra
- Faulty battery
- Loose or corroded battery terminals
- Wiring or connection issues in the battery system
- Defective ECM
- Software malfunction in the ECM
Symptoms of P167F 2018 GMC Sierra
- Engine misfires
- Rough idle
- Reduced fuel efficiency
- Difficulty starting the vehicle
- Illumination of the Check Engine Light
How to Fix P167F 2018 GMC Sierra
- Begin by checking the battery voltage using a multimeter to ensure it is within the manufacturer's specifications.
- Inspect the battery terminals for corrosion or looseness and clean/tighten them as needed.
- Check the wiring and connections in the battery system for any damage or looseness, repairing or replacing as necessary.
- If the issue persists, consider reprogramming or replacing the ECM to address any software or hardware malfunctions.
Cost to Fix P167F 2018 GMC Sierra
The typical repair costs for addressing the P167F code in a 2018 GMC Sierra can vary depending on the specific cause of the issue. On average, the cost of parts such as a new battery or ECM can range from $100 to $500, while labor costs can be between $100 and $300. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is advisable to check with local shops for a more accurate estimate.
Need more information about the P167F 2018 GMC Sierra code?
Need more information on how to fix the P167F 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P167F 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P167F 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P167F in a 2018 GMC Sierra?
- Common symptoms include issues with starting the vehicle, dimming lights, and potential battery charging problems.
2. What can cause the OBDII code P167F to appear in a 2018 GMC Sierra?
- The code may be triggered by a faulty battery, alternator issues, poor electrical connections, or a malfunctioning voltage regulator.
3. How can I diagnose the OBDII code P167F in my 2018 GMC Sierra?
- Diagnosing the code involves checking the battery voltage levels, inspecting the alternator, testing the voltage regulator, and examining electrical connections for any issues.
4. What steps can I take to repair the OBDII code P167F in my 2018 GMC Sierra?
- Repair steps may include replacing the battery if it's faulty, repairing or replacing the alternator, fixing any loose or corroded electrical connections, and ensuring the voltage regulator is functioning properly.
5. Can I still drive my 2018 GMC Sierra with the OBDII code P167F present?
- It is not recommended to drive the vehicle with this code present, as it can lead to potential electrical system failures and cause further damage to components.
6. How serious is the OBDII code P167F in a 2018 GMC Sierra?
- The code should be addressed promptly as it indicates a problem with the battery voltage signal message counter, which can affect the vehicle's overall performance and reliability.
7. Will resetting the OBDII code P167F in my 2018 GMC Sierra make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue is not addressed, the code is likely to reappear.
8. Can a DIY enthusiast fix the OBDII code P167F in a 2018 GMC Sierra?
- Depending on their skill level, a DIY enthusiast may be able to address this issue by following repair guides and using the necessary tools.
9. Is it necessary to take my 2018 GMC Sierra to a dealership for the OBDII code P167F repair?
- While a dealership may have specialized equipment and expertise, a trusted mechanic or auto repair shop can also effectively diagnose and repair the issue.
10. How much can I expect to pay to fix the OBDII code P167F in my 2018 GMC Sierra?
- The cost of repair can vary depending on the underlying cause of the code, but it may involve expenses for parts and labor, with an average cost ranging from $200 to $500.
Discuss the causes and fixes for P167F 2018 GMC Sierra OBDII Code
Code P167F 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.