P1671 Code - Quad Driver Module 'C' Fault Detected Conditions
Quick Answer
The P1671 diagnostic trouble code (DTC) indicates that the Engine Control Module (ECM) has detected a fault in the Quad Driver Module 'C'. Common causes include Faulty Quad Driver Module 'C', Wiring or connector issues related to the module, Corrosion or poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1671 indicates Quad Driver Module 'C' Fault Detected Conditions.
- Common causes
- Common causes include Faulty Quad Driver Module 'C', Wiring or connector issues related to the module, Corrosion or poor electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1671 Description
The P1671 diagnostic trouble code (DTC) indicates that the Engine Control Module (ECM) has detected a fault in the Quad Driver Module 'C'. The Quad Driver Module is an electronic component responsible for controlling multiple circuits in the vehicle's engine management system. In this case, the 'C' module is specifically experiencing an issue, which can lead to various performance problems.
Common Causes of P1671
- Faulty Quad Driver Module 'C'
- Wiring or connector issues related to the module
- Corrosion or poor electrical connections
- Overloading of the module due to excessive current draw
- ECM software or programming issues
Symptoms of P1671
- Engine misfires or rough idling
- Loss of power or acceleration
- Stalling or difficulty starting the engine
- Illumination of the Check Engine Light
- Decreased fuel efficiency
How to Fix P1671
- Diagnose the specific cause of the fault by using a scan tool to retrieve the trouble codes and perform a thorough inspection of the Quad Driver Module 'C' and related components.
- Check the wiring harness and connectors for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the Quad Driver Module 'C' for proper functionality and replace it if it is determined to be faulty.
- Clear the DTCs from the ECM memory and perform a test drive to verify that the issue has been resolved.
- If the problem persists, further diagnostics may be required to pinpoint the root cause and address it accordingly.
Cost to Fix P1671
The cost of repairing a Quad Driver Module 'C' fault can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. Generally, replacing the module itself can range from $150 to $300, while diagnostic fees and labor costs can add an additional $100 to $200. Overall, the total repair cost may fall between $250 and $500. However, it's essential to consult with a professional technician to get an accurate estimate based on your vehicle's make and model, as well as the extent of the required repairs. Labor rates typically range from $80 to $150 per hour, but prices can fluctuate based on location and shop reputation.
Need more information about the P1671 code?
Need more information on how to fix the P1671 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1671 code diagnosed by a professional: Find a repair shop in your area
Code P1671 Information for Specific Makes
- P1671 Acura — Automatic Transmission To Engine Control Module No Signal
- P1671 Buick — Quad Driver Module 'C' Fault Detected Conditions
- P1671 Cadillac — Quad Driver Module 'C' Fault Detected Conditions
- P1671 Chevrolet — Quad Driver Module 'C' Fault Detected Conditions
- P1671 GMC — Quad Driver Module 'C' Fault Detected Conditions
- P1671 Land Rover — Engine Control Module Cooling Fan Circuit High
- P1671 Saab — Throttle Actuator Limp Home Relay Short To Positive
- P1671 Volvo — CMP Actuator Performance Problem Or Signal Out Of Range
Frequently Asked Questions about P1671 Code
1. What are the common symptoms of OBDII code P1671 (Quad Driver Module 'C' Fault Detected Conditions)?
- Common symptoms include engine misfires, rough idling, poor acceleration, and illuminated Check Engine Light.
2. What can cause the OBDII code P1671 to be triggered?
- The code P1671 is typically triggered by a malfunction in the Quad Driver Module 'C', which controls various electronic components in the vehicle.
3. How serious is the OBDII code P1671 (Quad Driver Module 'C' Fault Detected Conditions)?
- While the vehicle may still be drivable with this code, it is important to address it promptly to prevent potential damage to other engine components.
4. How can I diagnose the OBDII code P1671?
- Diagnosing the code P1671 usually involves using a diagnostic scanner to retrieve the specific trouble codes, followed by testing the Quad Driver Module 'C' and related circuits for faults.
5. What are some DIY repair tips for fixing the OBDII code P1671?
- DIY repair tips may include checking and repairing any damaged wiring or connectors related to the Quad Driver Module 'C', or replacing the module itself if necessary.
6. Can I continue driving with the OBDII code P1671 present?
- It is not recommended to ignore the OBDII code P1671 and continue driving, as it can lead to further issues and potentially affect the vehicle's performance.
7. How much does it typically cost to repair the OBDII code P1671?
- The cost of repairing the OBDII code P1671 can vary depending on the underlying cause and the extent of the repair needed. It is advisable to consult a professional mechanic for an accurate estimate.
8. Are there any preventive measures to avoid the OBDII code P1671 in the future?
- Regular maintenance, such as checking and replacing worn-out components, can help prevent issues that may trigger the OBDII code P1671.
9. Can a faulty Quad Driver Module 'C' affect other systems in the vehicle?
- Yes, a faulty Quad Driver Module 'C' can potentially affect other electronic systems in the vehicle, leading to various performance issues.
10. Is it necessary to reset the Check Engine Light after repairing the OBDII code P1671?
- Yes, it is recommended to reset the Check Engine Light after repairing the OBDII code P1671 to ensure that the issue has been resolved and to monitor for any new problems.
Discuss the causes and fixes for P1671 OBDII Code
Code P1671 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.