P1670 GMC Code - Quad Driver Module 'C' Fault Detected Conditions
Quick Answer
The P1670 GMC code indicates that there is a fault detected in the Quad Driver Module 'C'. Common causes include Wiring issues or short circuits in the Quad Driver Module circuit, A faulty Quad Driver Module 'C', Malfunctioning component controlled by the module (e.g., fuel injector). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1670 GMC indicates Quad Driver Module 'C' Fault Detected Conditions.
- Common causes
- Common causes include Wiring issues or short circuits in the Quad Driver Module circuit, A faulty Quad Driver Module 'C', Malfunctioning component controlled by the module (e.g., fuel injector).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1670 GMC Description
The P1670 GMC code indicates that there is a fault detected in the Quad Driver Module 'C'. The Quad Driver Module is an integral part of the engine control module (ECM) that controls various components of the vehicle, such as fuel injectors, ignition coils, and other actuators. In this case, 'C' refers to a specific driver within the module that is responsible for controlling a particular component.
Common Causes of P1670 GMC
- Wiring issues or short circuits in the Quad Driver Module circuit
- A faulty Quad Driver Module 'C'
- Malfunctioning component controlled by the module (e.g., fuel injector)
- ECM software or hardware issues
- Environmental factors such as moisture or corrosion affecting the connections
Symptoms of P1670 GMC
- Rough idling or engine misfires
- Engine stalling or hesitation during acceleration
- Illumination of the Check Engine Light
- Reduced fuel efficiency
- Difficulty starting the vehicle
How to Fix P1670 GMC
- Diagnose the specific cause of the fault code using a diagnostic scanner to pinpoint the issue.
- Inspect the wiring and connections related to the Quad Driver Module 'C' for any signs of damage, corrosion, or loose connections.
- Test the functionality of the Quad Driver Module 'C' and the component it controls to determine if either needs replacement.
- Replace the faulty Quad Driver Module or component as needed, ensuring proper installation and connection.
- Clear the fault code from the ECM memory and perform a test drive to verify that the issue has been resolved.
Cost to Fix P1670 GMC
The cost of repairing a Quad Driver Module 'C' fault can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the repair cost for this type of issue can range from $200 to $500, including parts and labor. However, it's important to note that labor rates at auto repair shops can vary significantly, so it's advisable to check with local shops for a more accurate estimate. Additional costs may apply if other components need to be replaced or if further diagnosis is required.
Need more information about the P1670 GMC code?
Need more information on how to fix the P1670 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1670 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1670 GMC Code
1. What does the OBDII code P1670 mean for GMC vehicles?
P1670 indicates a fault in the Quad Driver Module 'C,' which is responsible for controlling certain circuits in the vehicle’s electronic system.
2. What are common symptoms of the P1670 code in GMC vehicles?
Symptoms may include the check engine light turning on, erratic or failed operation of components like relays or solenoids, or noticeable drivability issues.
3. What causes the P1670 code to appear on a GMC vehicle?
Common causes include a short circuit, open circuit, faulty Quad Driver Module, or an issue with the wiring or connectors related to the module.
4. Can the P1670 code affect vehicle performance?
Yes, depending on the circuits controlled by the Quad Driver Module, this code can lead to issues like engine performance problems or malfunctions in auxiliary systems.
5. How can I diagnose the P1670 code on a GMC vehicle?
Use a scan tool to identify the affected circuits, visually inspect wiring and connectors for damage, and test the Quad Driver Module for proper function.
6. Is the P1670 code specific to certain GMC models?
No, this code can appear on various GMC models equipped with OBDII systems, though the affected circuits may vary between vehicles.
7. Can a faulty Quad Driver Module cause other OBDII codes?
Yes, if the module controls multiple circuits, its failure might trigger additional codes related to those circuits.
8. What repairs are typically needed for the P1670 code?
Repairs may involve replacing damaged wiring, connectors, or the Quad Driver Module itself, depending on the specific fault.
9. How much does it cost to fix the P1670 code on a GMC vehicle?
Costs vary based on the complexity of the repair, but replacing a Quad Driver Module can range from $100 to $500, excluding labor.
10. Can I clear the P1670 code without fixing the underlying issue?
Clearing the code without addressing the problem may temporarily remove the check engine light, but the issue will likely return and may worsen over time.
Discuss the causes and fixes for P1670 GMC OBDII Code
Code P1670 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.