P1655 Buick Code - EVAP Purge Solenoid Control Circuit
Quick Answer
The P1655 Buick code indicates a problem with the EVAP (Evaporative Emission Control System) purge solenoid control circuit. Common causes include Faulty Purge Solenoid: The purge solenoid itself may be defective or stuck in the open or closed position, Wiring Issues: Damaged or corroded wiring connections to the purge solenoid can disrupt the circuit, Vacuum Leaks: Any leaks in the vacuum lines connected to the EVAP system can cause the purge solenoid control circuit to malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1655 Buick indicates EVAP Purge Solenoid Control Circuit.
- Common causes
- Common causes include Faulty Purge Solenoid: The purge solenoid itself may be defective or stuck in the open or closed position, Wiring Issues: Damaged or corroded wiring connections to the purge solenoid can disrupt the circuit, Vacuum Leaks: Any leaks in the vacuum lines connected to the EVAP system can cause the purge solenoid control circuit to malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1655 Buick Description
The P1655 Buick code indicates a problem with the EVAP (Evaporative Emission Control System) purge solenoid control circuit. The EVAP system controls the release of fuel vapors from the fuel tank into the engine intake for combustion, preventing them from escaping into the atmosphere. The purge solenoid is responsible for controlling the flow of vapors from the charcoal canister to the engine. When this circuit malfunctions, it can lead to issues with fuel efficiency, emissions, and overall engine performance.
Common Causes of P1655 Buick
- Faulty Purge Solenoid: The purge solenoid itself may be defective or stuck in the open or closed position.
- Wiring Issues: Damaged or corroded wiring connections to the purge solenoid can disrupt the circuit.
- Vacuum Leaks: Any leaks in the vacuum lines connected to the EVAP system can cause the purge solenoid control circuit to malfunction.
- Charcoal Canister Contamination: If the charcoal canister is contaminated with debris or fuel, it can affect the operation of the system.
- ECM (Engine Control Module) Failure: A malfunctioning ECM can also trigger the P1655 code by not sending the correct signals to the purge solenoid.
Symptoms of P1655 Buick
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Rough Idle: A malfunctioning EVAP purge solenoid control circuit can cause the engine to idle roughly or inconsistently.
- Poor Fuel Economy: The vehicle may experience a decrease in fuel efficiency due to improper fuel vapor management.
- Gasoline Smell: A strong gasoline smell inside or outside the vehicle can indicate a leak in the EVAP system.
- Failed Emissions Test: If the EVAP system is not functioning properly, the vehicle may fail an emissions test due to increased emissions.
How to Fix P1655 Buick
- Diagnose the Issue: Use a scan tool to retrieve the specific code and then inspect the purge solenoid, wiring, and vacuum lines for any visible damage.
- Replace Purge Solenoid: If the solenoid is faulty, replace it with a new one and ensure it is properly connected.
- Repair Wiring: Repair or replace any damaged wiring connections related to the EVAP purge solenoid control circuit.
- Inspect Vacuum Lines: Check for any leaks in the vacuum lines and repair or replace them as needed.
- Clear Codes: Clear the diagnostic trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1655 Buick
The cost of repairing a P1655 Buick code can vary depending on the specific cause of the issue and the labor rates of the repair shop. On average, the replacement of a purge solenoid can cost between $100 and $200, while labor costs can range from $50 to $100 per hour. Additional costs for diagnostic testing, parts, and any necessary repairs may also apply. It's recommended to consult with a qualified mechanic or auto repair shop for an accurate estimate based on the individual circumstances of the vehicle.
Need more information about the P1655 Buick code?
Need more information on how to fix the P1655 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1655 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1655 Buick Code
No Frequently Asked Questions about P1655 Buick Code found.
Discuss the causes and fixes for P1655 Buick OBDII Code
Code P1655 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.