P1649 2014 GMC Sierra Code - Immobilizer Security Code Not Programmed
Quick Answer
The diagnostic trouble code P1649 for a 2014 GMC Sierra indicates that the Immobilizer Security Code is not programmed. Common causes include Faulty key fob or key, Issues with the immobilizer system, Battery drain causing memory loss in the immobilizer system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1649 2014 GMC Sierra indicates Immobilizer Security Code Not Programmed.
- Common causes
- Common causes include Faulty key fob or key, Issues with the immobilizer system, Battery drain causing memory loss in the immobilizer system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1649 2014 GMC Sierra Description
The diagnostic trouble code P1649 for a 2014 GMC Sierra indicates that the Immobilizer Security Code is not programmed. The immobilizer system is a security feature in modern vehicles that prevents the engine from starting unless the correct key is used. When the immobilizer security code is not programmed correctly or is missing, the vehicle's engine may not start, or it may start and then immediately shut off. This code can significantly impact the vehicle's performance and security.
Common Causes of P1649 2014 GMC Sierra
- Faulty key fob or key
- Issues with the immobilizer system
- Battery drain causing memory loss in the immobilizer system
- Aftermarket modifications interfering with the immobilizer system
- Electrical issues in the vehicle's wiring related to the immobilizer system
Symptoms of P1649 2014 GMC Sierra
- Engine cranks but does not start
- Engine starts but immediately shuts off
- Security light on the dashboard stays illuminated
- Reduced engine power
- Vehicle goes into security lockout mode
How to Fix P1649 2014 GMC Sierra
- Check the key fob and key for any damage or malfunctions.
- Use specialized equipment to access the immobilizer system and reprogram the security code.
- Verify that the immobilizer system is functioning correctly after reprogramming the security code.
- Test the vehicle to ensure that the engine starts and runs smoothly without any issues.
- Clear the diagnostic trouble code from the vehicle's ECM to reset the system.
Cost to Fix P1649 2014 GMC Sierra
The cost of repairing the immobilizer security code not programmed issue can vary depending on the labor rates and parts needed. On average, this repair can cost between $200 and $500, including the cost of reprogramming the security code and any necessary diagnostics. It's important to note that labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.
Need more information about the P1649 2014 GMC Sierra code?
Need more information on how to fix the P1649 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1649 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1649 2014 GMC Sierra Code
1. What does the OBDII code P1649 mean on a 2014 GMC Sierra?
P1649 indicates that the immobilizer security code is not programmed or is not recognized by the vehicle's anti-theft system.
2. What are the symptoms of the P1649 code on a 2014 GMC Sierra?
Common symptoms include the engine not starting, the security light illuminating on the dashboard, and possible trouble with the key fob or ignition system.
3. What causes the P1649 code on a 2014 GMC Sierra?
The primary causes include a key that hasn’t been programmed to the vehicle, a malfunctioning immobilizer, or an issue with the vehicle's anti-theft system.
4. How can I fix the P1649 code on my 2014 GMC Sierra?
You may need to reprogram the key using a professional scan tool or visit a dealership to ensure the immobilizer system is synced with the vehicle's ECU.
5. Can a dead or weak key fob battery trigger the P1649 code?
No, a weak key fob battery typically won’t cause this code, but it may prevent the key from being recognized, which could be mistaken for an immobilizer issue.
6. Do I need a new key to fix the P1649 code on my GMC Sierra?
Not necessarily. If the key is undamaged, it may just need to be reprogrammed to the immobilizer system.
7. Can replacing the battery in my 2014 GMC Sierra cause the P1649 code to appear?
Yes, disconnecting the battery can sometimes reset the immobilizer system, requiring the key to be reprogrammed.
8. Is clearing the P1649 code with an OBDII scanner enough to fix the issue?
No, simply clearing the code will not resolve the underlying issue. The immobilizer system must be properly programmed or repaired.
9. How much does it cost to fix the P1649 code on a 2014 GMC Sierra?
The cost can vary, but key reprogramming at a dealership typically ranges from $50 to $150. If more extensive repairs are needed, costs can increase.
10. Can I program the key for my 2014 GMC Sierra myself to fix the P1649 code?
Some vehicles allow for self-programming of keys with specific steps outlined in the owner’s manual, but many require specialized tools or dealership assistance.
Discuss the causes and fixes for P1649 2014 GMC Sierra OBDII Code
Code P1649 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.