P1647 GMC Code - Driver 1 Line 7
Quick Answer
The P1647 GMC code specifically refers to "Driver 1 Line 7," which indicates a problem with the communication circuit between the engine control module (ECM) and the driver 1 input circuit. Common causes include Damaged wiring or connectors in the communication circuit, Faulty ECM, Malfunctioning driver 1 input circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1647 GMC indicates Driver 1 Line 7.
- Common causes
- Common causes include Damaged wiring or connectors in the communication circuit, Faulty ECM, Malfunctioning driver 1 input circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1647 GMC Description
The P1647 GMC code specifically refers to "Driver 1 Line 7," which indicates a problem with the communication circuit between the engine control module (ECM) and the driver 1 input circuit. In modern vehicles, there are multiple lines of communication between various components of the vehicle, allowing for data exchange and control signals. When this particular line, line 7, fails to function properly, it can lead to issues with engine performance, fuel efficiency, and overall drivability.
Common Causes of P1647 GMC
- Damaged wiring or connectors in the communication circuit
- Faulty ECM
- Malfunctioning driver 1 input circuit
- Sensor issues sending incorrect signals to the ECM
- Electrical interference or short circuits
Symptoms of P1647 GMC
- Engine misfires or rough idling
- Decreased fuel efficiency
- Check Engine Light illuminated
- Loss of power or acceleration
- Vehicle stalling or difficulty starting
How to Fix P1647 GMC
- Conduct a thorough inspection of the communication circuit, including wiring and connectors, to identify any damage or corrosion.
- Test the ECM and driver 1 input circuit for proper functionality using a diagnostic scanner to pinpoint the source of the issue.
- Replace any damaged wiring or connectors and repair any faulty components identified during testing.
- Clear the diagnostic trouble codes from the ECM memory and perform a test drive to ensure the issue has been resolved.
- If the problem persists, consult with a professional technician for further diagnostics and potential component replacement.
Cost to Fix P1647 GMC
The typical repair costs for addressing the P1647 GMC code can vary depending on the exact cause of the issue and the specific components that require replacement. On average, the repair costs for this issue can range from $200 to $500, including parts and labor. It's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate before proceeding with the repair.
Need more information about the P1647 GMC code?
Need more information on how to fix the P1647 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1647 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1647 GMC Code
1. What does the GMC OBDII code P1647 mean?
P1647 on a GMC vehicle indicates an issue with the Driver 1 Line 7 circuit, typically relating to the communication or control between the engine control module (ECM) and a specific driver circuit.
2. What are the common symptoms of code P1647 in a GMC?
Symptoms may include an illuminated check engine light, poor engine performance, misfires, or communication issues with specific sensors or actuators.
3. What causes the P1647 code to appear on a GMC?
Possible causes include a faulty ECM, damaged or corroded wiring, a malfunctioning driver circuit component, or poor electrical connections.
4. Can I keep driving my GMC with a P1647 code?
Driving with a P1647 code may not immediately damage your vehicle, but it can affect performance and fuel efficiency. It's best to diagnose and repair the issue promptly.
5. How is the P1647 code diagnosed in a GMC?
A technician will use a scan tool to read live data, inspect the wiring and connectors in the affected circuit, and test the operation of related components.
6. What repairs can fix the P1647 code on a GMC?
Repairs may include replacing damaged wiring, repairing or replacing connectors, updating or reprogramming the ECM, or replacing a failed driver circuit component.
7. How much does it cost to fix the P1647 code on a GMC?
The repair cost varies depending on the root cause but typically ranges from $100 for minor wiring repairs to $1,000 or more if the ECM needs replacement.
8. Can a faulty ECM cause the P1647 code on a GMC?
Yes, a malfunctioning ECM can cause the P1647 code by failing to properly control the Driver 1 Line 7 circuit.
9. Will clearing the P1647 code solve the problem on my GMC?
Clearing the code may turn off the check engine light temporarily, but if the underlying issue is not resolved, the code will return.
10. What tools are required to troubleshoot the P1647 code on a GMC?
Essential tools include an OBDII scan tool, a multimeter for testing electrical circuits, and a wiring diagram for the vehicle.
Discuss the causes and fixes for P1647 GMC OBDII Code
Code P1647 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.