P1633 2006 Ford Fusion Code - Keep Alive Power Voltage Too Low
Quick Answer
The P1633 diagnostic trouble code (DTC) for a 2006 Ford Fusion indicates that the Keep Alive Power (KAP) voltage is too low. Common causes include Faulty battery or alternator, Loose or corroded electrical connections, Failed Keep Alive Power relay. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1633 2006 Ford Fusion indicates Keep Alive Power Voltage Too Low .
- Common causes
- Common causes include Faulty battery or alternator, Loose or corroded electrical connections, Failed Keep Alive Power relay.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1633 2006 Ford Fusion Description
The P1633 diagnostic trouble code (DTC) for a 2006 Ford Fusion indicates that the Keep Alive Power (KAP) voltage is too low. The Keep Alive Power is a critical component of the vehicle's onboard computer system, as it maintains power to the computer's memory even when the vehicle is turned off. This code typically points to an issue with the voltage supply to the computer system, which can lead to various performance issues and potentially cause long-term damage if not addressed promptly.
Common Causes of P1633 2006 Ford Fusion
- Faulty battery or alternator
- Loose or corroded electrical connections
- Failed Keep Alive Power relay
- Wiring issues or shorts in the electrical system
- Faulty PCM (Powertrain Control Module)
Symptoms of P1633 2006 Ford Fusion
- Rough idling or engine misfires
- Poor fuel efficiency
- Difficulty starting the vehicle
- Stalling or hesitation while driving
- Check Engine Light illuminated on the dashboard
How to Fix P1633 2006 Ford Fusion
- Begin by checking the battery and alternator to ensure they are functioning properly and providing sufficient voltage to the vehicle's electrical system.
- Inspect all electrical connections related to the Keep Alive Power circuit for any signs of corrosion or looseness. Clean and tighten connections as needed.
- Test the Keep Alive Power relay to determine if it is functioning correctly. Replace the relay if necessary.
- Check the wiring harness for any signs of damage or shorts. Repair or replace any damaged wiring.
- If the issue persists, consider having the PCM tested or replaced by a qualified mechanic.
Cost to Fix P1633 2006 Ford Fusion
The cost of repairing a P1633 code on a 2006 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of parts for this repair can range from $50 to $200, with labor costs adding an additional $100 to $300. Keep in mind that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P1633 2006 Ford Fusion code?
Need more information on how to fix the P1633 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1633 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1633 2006 Ford Fusion Code
1. What does the OBDII code P1633 mean on a 2006 Ford Fusion?
P1633 indicates that the Keep Alive Power (KAP) voltage is too low, meaning the PCM (Powertrain Control Module) is not receiving constant battery power to retain memory when the ignition is off.
2. What are common symptoms of code P1633 in a 2006 Ford Fusion?
Symptoms include the check engine light turning on, loss of stored settings such as idle or fuel trim data, and potentially poor engine performance or stalling.
3. What causes the P1633 code to appear?
The most common causes are a disconnected or faulty Keep Alive Power (KAP) circuit, a weak or dead battery, corroded battery terminals, or a blown fuse.
4. Can a weak battery trigger the P1633 code?
Yes, a weak or failing battery can cause insufficient voltage to the PCM, triggering the P1633 code.
5. How do I fix the P1633 code on a 2006 Ford Fusion?
Check the battery voltage, inspect and clean battery connections, ensure the KAP fuse is intact, and verify the wiring and connections to the PCM are secure.
6. Where is the Keep Alive Power circuit located on a 2006 Ford Fusion?
The KAP circuit typically runs from the battery to the PCM via a dedicated fuse in the fuse box. Consult the vehicle’s wiring diagram for exact details.
7. Can driving with the P1633 code cause damage to my car?
Driving with this code may not cause immediate damage, but it can lead to poor engine performance and other issues as the PCM loses critical data each time the car is turned off.
8. Does the P1633 code affect engine performance?
Yes, if the PCM cannot retain memory, it may result in poor fuel efficiency, rough idle, or hesitation due to a lack of adaptive learning.
9. Can a blown fuse cause the P1633 code?
Yes, a blown KAP fuse can interrupt the power supply to the PCM, triggering the P1633 code.
10. Do I need to replace the PCM if I get a P1633 code?
PCM replacement is rarely necessary for this code. Start by checking the battery, wiring, and fuses before considering PCM issues.
Discuss the causes and fixes for P1633 2006 Ford Fusion OBDII Code
Code P1633 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.