P1629 Pontiac Code - Theft Deterrent Start Enable Signal Not Received
Quick Answer
The P1629 code for Pontiac vehicles indicates that the Theft Deterrent Start Enable Signal was not received by the Engine Control Module (ECM). Common causes include Faulty ignition lock cylinder, Malfunctioning Passlock sensor, Wiring or connection issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1629 Pontiac indicates Theft Deterrent Start Enable Signal Not Received.
- Common causes
- Common causes include Faulty ignition lock cylinder, Malfunctioning Passlock sensor, Wiring or connection issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1629 Pontiac Description
The P1629 code for Pontiac vehicles indicates that the Theft Deterrent Start Enable Signal was not received by the Engine Control Module (ECM). In simpler terms, the vehicle's security system has not communicated properly with the engine's control unit, preventing the engine from starting. This code is commonly seen in GM vehicles, including Pontiac models, equipped with a Passlock system, a type of anti-theft system that requires the correct key to start the engine.
Common Causes of P1629 Pontiac
- Faulty ignition lock cylinder
- Malfunctioning Passlock sensor
- Wiring or connection issues
- Faulty Body Control Module (BCM)
- Issues with the ECM communication
Symptoms of P1629 Pontiac
- Engine cranks but does not start
- Engine starts but stalls immediately
- Security light illuminated on the dashboard
- Inability to start the vehicle
How to Fix P1629 Pontiac
- Perform a diagnostic scan to confirm the P1629 code and identify the specific cause.
- Inspect the ignition lock cylinder and Passlock sensor for any signs of damage or malfunction.
- Check the wiring and connections related to the Passlock system for any faults or loose connections.
- Replace any faulty components, such as the ignition lock cylinder, Passlock sensor, or BCM, as needed.
- Reset the security system and perform a relearn procedure to ensure proper communication between the systems.
Cost to Fix P1629 Pontiac
The cost of repairing a P1629 code can vary depending on the specific cause of the issue and the labor rates of the repair shop. On average, the parts required for this repair could range from $100 to $300, depending on the components that need replacement. Labor costs could add an additional $100 to $300, bringing the total estimated repair cost to around $200 to $600. However, it's important to note that these are rough estimates, and actual costs may vary based on individual circumstances and location. It's recommended to consult with a trusted mechanic or repair shop for a more accurate cost estimate.
Need more information about the P1629 Pontiac code?
Need more information on how to fix the P1629 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1629 Pontiac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1629 Pontiac Code
What does the OBDII code P1629 mean on a Pontiac?
The P1629 code indicates that the Theft Deterrent Start Enable Signal was not received, preventing the engine from starting due to an issue with the vehicle's security system.
What are the common symptoms of the P1629 code in a Pontiac?
Symptoms include the engine not starting, security light staying on or flashing, and possible intermittent starting issues.
What causes the P1629 code to appear in a Pontiac?
The code can be triggered by a faulty ignition switch, a malfunctioning passlock sensor, damaged wiring in the security system, or a problem with the body control module (BCM).
Can I drive my Pontiac with the P1629 code?
No, the vehicle may not start or could experience intermittent starting issues, making it unreliable to drive until the problem is resolved.
How do I diagnose the P1629 code on a Pontiac?
Start by checking for related codes, inspecting the ignition switch and wiring, testing the passlock sensor, and verifying the communication between the BCM and the engine control module (ECM).
How do I fix the P1629 code on a Pontiac?
Repairs may include replacing the ignition switch, repairing or replacing damaged wiring, reprogramming the passlock system, or replacing the body control module (BCM).
What tools are needed to troubleshoot the P1629 code?
You’ll need an OBDII scanner, a multimeter to test electrical connections, and possibly specialized tools for reprogramming the security system.
Does the P1629 code require reprogramming after repairs?
Yes, if components like the ignition switch or BCM are replaced, the passlock security system may need to be reprogrammed to sync with the new parts.
Can a dead battery cause the P1629 code in a Pontiac?
A dead or weak battery can sometimes disrupt the communication between security system components, potentially triggering the P1629 code.
How much does it cost to fix the P1629 code on a Pontiac?
Repair costs vary but may range from $100 to $500, depending on whether components like the ignition switch or BCM need replacement and if reprogramming is required.
Discuss the causes and fixes for P1629 Pontiac OBDII Code
Code P1629 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.