P1628 Dodge Code - Sensor Reference Voltage 2 Circuit Erratic
Quick Answer
The P1628 diagnostic trouble code (DTC) for Dodge vehicles indicates an issue with the sensor reference voltage 2 circuit being erratic. Common causes include Faulty sensor, Loose or corroded wiring connections, Poor electrical grounds. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1628 Dodge indicates Sensor Reference Voltage 2 Circuit Erratic.
- Common causes
- Common causes include Faulty sensor, Loose or corroded wiring connections, Poor electrical grounds.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1628 Dodge Description
The P1628 diagnostic trouble code (DTC) for Dodge vehicles indicates an issue with the sensor reference voltage 2 circuit being erratic. This means that the power supply to the sensor connected to this circuit is experiencing fluctuations or inconsistencies, which can lead to incorrect sensor readings and potential performance issues in the vehicle. The sensor reference voltage is crucial for providing accurate data to the engine control module (ECM) to ensure proper fuel delivery, ignition timing, and emissions control.
Common Causes of P1628 Dodge
- Faulty sensor
- Loose or corroded wiring connections
- Poor electrical grounds
- Malfunctioning ECM
- Short circuits in the sensor reference voltage circuit
Symptoms of P1628 Dodge
- Engine misfires
- Rough idling
- Stalling
- Decreased fuel efficiency
- Poor acceleration
How to Fix P1628 Dodge
- Perform a thorough inspection of the sensor reference voltage 2 circuit and associated components.
- Test the sensor's functionality and replace if necessary.
- Check and repair any loose or corroded wiring connections.
- Verify proper electrical grounds and repair any issues.
- Clear the DTC and reset the ECM to see if the issue persists after repairs.
Cost to Fix P1628 Dodge
The typical repair costs for addressing a P1628 DTC can range from $100 to $300, including parts and labor. However, actual costs may vary depending on the specific diagnosis time and labor rates at auto repair shops, as well as the location, vehicle make and model, and engine type. It's advisable to consult local rates to get a more accurate estimate for resolving this issue.
Need more information about the P1628 Dodge code?
Need more information on how to fix the P1628 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1628 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1628 Dodge Code
1. What are the common symptoms of OBDII code P1628 (Dodge) related to Sensor Reference Voltage 2 Circuit Erratic?
Symptoms may include rough idle, stalling, poor engine performance, and illuminated check engine light.
2. What are the possible causes of OBDII code P1628 (Dodge) indicating Sensor Reference Voltage 2 Circuit Erratic?
Potential causes include a faulty sensor, damaged wiring or connectors, issues with the powertrain control module (PCM), or a low battery voltage.
3. How can I diagnose the Sensor Reference Voltage 2 Circuit Erratic issue causing OBDII code P1628 (Dodge)?
Perform a thorough inspection of the sensor and its wiring, check for loose connections, test the sensor voltage, and scan the PCM for any related trouble codes.
4. Can driving with OBDII code P1628 (Dodge) present cause further damage to the vehicle?
Continued driving with this code may lead to decreased fuel efficiency, engine misfires, and potential damage to other components, so it's best to address the issue promptly.
5. Are there any DIY repair tips for fixing OBDII code P1628 (Dodge) associated with Sensor Reference Voltage 2 Circuit Erratic?
DIY enthusiasts can try checking and cleaning the sensor connectors, inspecting the wiring for damage, and resetting the PCM to see if the code clears.
6. Is it safe to reset the OBDII code P1628 (Dodge) related to Sensor Reference Voltage 2 Circuit Erratic without fixing the underlying issue?
While clearing the code may temporarily turn off the check engine light, the underlying problem will persist, potentially leading to more severe issues down the road.
7. How much does it typically cost to repair OBDII code P1628 (Dodge) caused by Sensor Reference Voltage 2 Circuit Erratic?
The cost of repairs can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor at a mechanic's shop.
8. Can extreme weather conditions affect the occurrence of OBDII code P1628 (Dodge) linked to Sensor Reference Voltage 2 Circuit Erratic?
Yes, extreme temperatures or humidity levels can impact sensor performance and exacerbate issues related to erratic sensor reference voltage.
9. What is the role of Sensor Reference Voltage 2 in the vehicle's system, and why is it crucial to address issues with this circuit promptly?
Sensor Reference Voltage 2 provides a stable voltage supply to critical sensors for accurate data readings, so any irregularities can lead to incorrect engine performance data and potential drivability issues.
10. Are there any recalls or technical service bulletins (TSBs) related to OBDII code P1628 (Dodge) concerning Sensor Reference Voltage 2 Circuit Erratic?
It's recommended to check with the manufacturer or a trusted dealership to inquire about any relevant recalls or TSBs that address this specific OBDII trouble code and its associated concerns.
Discuss the causes and fixes for P1628 Dodge OBDII Code
Code P1628 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.