P1574 2010 Nissan Altima Sedan Code - ASCD Vehicle Speed Sensor
Quick Answer
The P1574 diagnostic trouble code (DTC) in a 2010 Nissan Altima Sedan refers to an issue with the ASCD (Automatic Speed Control Device) vehicle speed sensor. Common causes include Faulty ASCD vehicle speed sensor: The sensor itself may be defective or damaged, leading to inaccurate speed readings and triggering the P1574 code, Wiring issues: Corrosion, breaks, or shorts in the wiring harness connecting the ASCD sensor to the ECM can disrupt the signal and cause the code to appear, ECM malfunction: A problem with the engine control module that prevents it from receiving or interpreting the speed sensor data correctly can also be a cause of the P1574 code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1574 2010 Nissan Altima Sedan indicates ASCD Vehicle Speed Sensor.
- Common causes
- Common causes include Faulty ASCD vehicle speed sensor: The sensor itself may be defective or damaged, leading to inaccurate speed readings and triggering the P1574 code, Wiring issues: Corrosion, breaks, or shorts in the wiring harness connecting the ASCD sensor to the ECM can disrupt the signal and cause the code to appear, ECM malfunction: A problem with the engine control module that prevents it from receiving or interpreting the speed sensor data correctly can also be a cause of the P1574 code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1574 2010 Nissan Altima Sedan Description
The P1574 diagnostic trouble code (DTC) in a 2010 Nissan Altima Sedan refers to an issue with the ASCD (Automatic Speed Control Device) vehicle speed sensor. The ASCD system, also known as cruise control, relies on the vehicle speed sensor to accurately maintain a set speed while driving. When this sensor malfunctions or fails to provide the necessary data to the engine control module (ECM), it can trigger the P1574 code.
Common Causes of P1574 2010 Nissan Altima Sedan
- Faulty ASCD vehicle speed sensor: The sensor itself may be defective or damaged, leading to inaccurate speed readings and triggering the P1574 code.
- Wiring issues: Corrosion, breaks, or shorts in the wiring harness connecting the ASCD sensor to the ECM can disrupt the signal and cause the code to appear.
- ECM malfunction: A problem with the engine control module that prevents it from receiving or interpreting the speed sensor data correctly can also be a cause of the P1574 code.
- Mechanical issues: Any physical damage to the toothed wheel on the transmission output shaft or other components related to the ASCD system can impact sensor performance and trigger the code.
- Software glitches: Occasionally, software issues within the ECM or ASCD system programming can lead to communication errors with the speed sensor, resulting in the P1574 code.
Symptoms of P1574 2010 Nissan Altima Sedan
- Inoperative cruise control: The most common symptom associated with the P1574 code is the inability to engage or maintain cruise control while driving.
- Erratic speed control: The vehicle may experience sudden changes in speed or struggle to maintain a consistent speed when cruise control is activated.
- Check Engine Light: The illumination of the Check Engine Light on the dashboard is a common indicator of a problem with the ASCD vehicle speed sensor.
- Harsh shifting: If the ASCD sensor issue affects the transmission control module, the vehicle may exhibit harsh or delayed shifting while driving.
How to Fix P1574 2010 Nissan Altima Sedan
- Diagnose the issue: Begin by using a diagnostic scanner to retrieve the specific trouble code (P1574) and perform a thorough inspection of the ASCD vehicle speed sensor, wiring, and related components.
- Replace the ASCD vehicle speed sensor: If the sensor is found to be faulty, it will need to be replaced with a new, OEM-quality sensor to restore proper functionality to the cruise control system.
- Repair wiring issues: Address any wiring problems by repairing or replacing damaged wires, connectors, or terminals to ensure a secure connection between the sensor and ECM.
- Check and reset ECM: Verify that the engine control module is functioning correctly and clear the stored trouble code after completing repairs to prevent the code from reappearing.
- Test drive and verify repair: After completing the repair process, take the vehicle for a test drive to confirm that the cruise control system is operating as expected and that the P1574 code does not return.
Cost to Fix P1574 2010 Nissan Altima Sedan
The cost of repairing the ASCD vehicle speed sensor issue in a 2010 Nissan Altima Sedan can vary depending on the specific cause of the problem and the labor rates at the repair facility. In general, replacing the ASCD sensor itself can range from $100 to $200, while addressing wiring issues or ECM malfunctions may increase the total cost. Including parts and labor, the total repair cost for this issue could range from $200 to $500 or more, depending on the extent of the repairs needed.
When is the Code Detected?
Need more information about the P1574 2010 Nissan Altima Sedan code?
Need more information on how to fix the P1574 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1574 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1574 2010 Nissan Altima Sedan Code
1. What does the OBDII code P1574 mean in a 2010 Nissan Altima Sedan?
P1574 indicates an issue with the ASCD (Automatic Speed Control Device) Vehicle Speed Sensor, meaning the ECM is not receiving a proper signal for cruise control operation.
2. What are the common symptoms of code P1574 in a 2010 Nissan Altima?
Symptoms may include the cruise control not working, an illuminated check engine light, or erratic speedometer readings.
3. What causes the P1574 code to appear in a Nissan Altima?
Common causes include a faulty vehicle speed sensor, damaged wiring or connectors, issues with the cruise control system, or a malfunctioning ECM.
4. Can I still drive my 2010 Nissan Altima with a P1574 code?
Yes, the car is generally drivable, but cruise control may not function, and there could be minor drivability issues depending on the severity of the problem.
5. How do I diagnose the P1574 code in my 2010 Nissan Altima?
Start by scanning the vehicle with an OBDII tool, inspecting the vehicle speed sensor and its wiring for damage, and testing the sensor's output with a multimeter.
6. How do I fix the P1574 code on a 2010 Nissan Altima?
Repairs may include replacing the vehicle speed sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to repair the P1574 code on a 2010 Nissan Altima?
Costs vary but typically range from $100 to $300 for parts and labor, depending on whether the issue is a sensor replacement or wiring repair.
8. Can a bad speed sensor cause other problems in my 2010 Nissan Altima?
Yes, a faulty speed sensor can cause inaccurate speedometer readings, poor fuel economy, and transmission shifting issues.
9. Does the P1574 code always mean the speed sensor is faulty?
Not always. The code could also be triggered by wiring problems, a faulty ECM, or a malfunction in the cruise control system.
10. Can I reset the P1574 code without fixing the issue?
You can clear the code with an OBDII scanner, but it will likely return if the underlying problem is not resolved.
Discuss the causes and fixes for P1574 2010 Nissan Altima Sedan OBDII Code
-
I just replaced the CVT transmission of my Altima 2010 4 cylinder, and then this error showed up during check up ( P1574- ASCD VHL SPD SEN ) , and the cruise control is set only until 110 km around 65 miles then it set lamb starts to blinks and it doesn't work
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.