Engine-Codes.com
Engine-Codes – Nissan – P1572 2011 Nissan Rogue

P1572 2011 Nissan Rogue Code - Brake Pedal Switch Circuit Malfunction

Quick Answer

The P1572 code for a 2011 Nissan Rogue indicates a Brake Pedal Switch Circuit Malfunction. Common causes include Faulty brake pedal switch, Wiring issues in the brake pedal switch circuit, Corrosion or damage to the electrical connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1572 2011 Nissan Rogue indicates Brake Pedal Switch Circuit Malfunction.
Common causes
Common causes include Faulty brake pedal switch, Wiring issues in the brake pedal switch circuit, Corrosion or damage to the electrical connectors.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1572 2011 Nissan Rogue Description

The P1572 code for a 2011 Nissan Rogue indicates a Brake Pedal Switch Circuit Malfunction. This means that there is an issue with the brake pedal switch, which is an essential component for the proper functioning of the vehicle's braking system. The brake pedal switch is responsible for sending a signal to the vehicle's electronic control unit (ECU) when the brake pedal is pressed, allowing the ECU to engage the brakes and control various safety systems.

OBDII Code P1572 2011 Nissan Rogue - Brake Pedal Switch Circuit Malfunction
P1572 2011 Nissan Rogue Code - Brake Pedal Switch Circuit Malfunction

Common Causes of P1572 2011 Nissan Rogue

  1. Faulty brake pedal switch.
  2. Wiring issues in the brake pedal switch circuit.
  3. Corrosion or damage to the electrical connectors.
  4. Issues with the ECU receiving the signal from the brake pedal switch.
  5. Mechanical issues with the brake pedal itself.

Symptoms of P1572 2011 Nissan Rogue

  1. Illumination of the ABS or traction control warning lights on the dashboard.
  2. Delayed response when applying the brakes.
  3. Inability to disengage cruise control when braking.
  4. Complete failure of the brakes.

How to Fix P1572 2011 Nissan Rogue

  1. Begin by diagnosing the specific cause of the Brake Pedal Switch Circuit Malfunction using a diagnostic scanner to read the fault codes and pinpoint the issue.
  2. Inspect the brake pedal switch for any visible damage or signs of wear. Replace the switch if necessary.
  3. Check the wiring and electrical connectors in the circuit for any corrosion, damage, or loose connections. Repair or replace as needed.
  4. Test the brake pedal switch circuit to ensure that the ECU is receiving the signal properly when the brake pedal is pressed.
  5. Clear the fault codes from the ECU and test drive the vehicle to confirm that the issue has been resolved.

Cost to Fix P1572 2011 Nissan Rogue

The typical repair costs for a Brake Pedal Switch Circuit Malfunction can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, the cost of replacing a faulty brake pedal switch and addressing any wiring or connector issues can range from $150 to $300. However, additional costs may apply if there are more complex underlying problems that need to be addressed. It is advisable to check with local auto repair shops for a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates can vary widely, with rates typically ranging between $80 and $150 per hour.

When is the Code Detected?

When the vehicle speed is above 30 km/h (19 MPH), ON signals from the stop lamp switch and the Automatic Speed Control Device (ASCD) brake switch are sent to the The Engine Control Modulee (ECM) at the same time.

Need more information about the P1572 2011 Nissan Rogue code?

Need more information on how to fix the P1572 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1572 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1572 2011 Nissan Rogue Code

1. What does the OBDII code P1572 mean for a 2011 Nissan Rogue?

P1572 indicates a Brake Pedal Switch Circuit Malfunction, meaning the vehicle's computer has detected an issue with the brake pedal switch or its circuit.

2. What are the common symptoms of the P1572 code?

Symptoms may include the brake lights not working, cruise control failing to engage, the inability to shift out of park, or the check engine light turning on.

3. What causes the P1572 code to appear?

Common causes include a faulty brake pedal switch, damaged wiring or connectors in the switch circuit, or an issue with the vehicle's ECM (engine control module).

4. Can a faulty brake pedal switch cause other problems?

Yes, a faulty brake pedal switch can prevent the vehicle from starting, shifting out of park, or disengaging the cruise control system.

5. How can I diagnose the P1572 code?

Start by checking the brake pedal switch for proper operation, inspect the wiring and connectors for damage or corrosion, and use a multimeter to test the circuit for continuity.

6. Is it safe to drive with the P1572 code?

Driving with this code is not recommended, as it can impact critical systems like the brake lights and cruise control, potentially compromising safety.

7. How do I fix the P1572 code on a 2011 Nissan Rogue?

Repair options include replacing the faulty brake pedal switch, repairing or replacing damaged wiring, and ensuring all connections are secure.

8. How much does it cost to fix the P1572 code?

The cost to fix this issue typically ranges from $50 to $200, depending on whether the brake pedal switch or wiring needs replacement.

9. Can I reset the P1572 code without fixing the issue?

You can clear the code with an OBDII scanner, but if the underlying issue isn’t resolved, the code will likely return.

10. How do I prevent the P1572 code from recurring?

Regularly inspect the brake pedal switch and its wiring for wear or damage, and address any electrical issues promptly to prevent recurrence.

Discuss the causes and fixes for P1572 2011 Nissan Rogue OBDII Code

Submit a New Comment

Code P1572 2011 Nissan Rogue comments

No comments found for this page.