P153D 2018 GMC Sierra Code - Driver Torque Request Signal Message Counter Incorrect
Quick Answer
The P153D diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates that the Driver Torque Request Signal Message Counter is incorrect. Common causes include Faulty accelerator pedal position sensor, Wiring or connection issues between the sensor and ECM, ECM software or hardware malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P153D 2018 GMC Sierra indicates Driver Torque Request Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Wiring or connection issues between the sensor and ECM, ECM software or hardware malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P153D 2018 GMC Sierra Description
The P153D diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates that the Driver Torque Request Signal Message Counter is incorrect. This code is typically associated with the vehicle's engine control module (ECM) and is related to the communication between the ECM and the torque request signal. The torque request signal is a crucial input that informs the ECM of the driver's demand for engine torque, which in turn affects various engine functions such as fuel delivery, ignition timing, and throttle response.
Common Causes of P153D 2018 GMC Sierra
- Faulty accelerator pedal position sensor
- Wiring or connection issues between the sensor and ECM
- ECM software or hardware malfunction
- Electrical interference or signal disruption
- Mechanical issues affecting the throttle body or related components
Symptoms of P153D 2018 GMC Sierra
- Reduced engine power or acceleration
- Rough idling or stalling
- Poor fuel efficiency
- Illumination of the check engine light
- Difficulty shifting gears (for automatic transmissions)
How to Fix P153D 2018 GMC Sierra
- Perform a thorough inspection of the accelerator pedal position sensor and associated wiring for any signs of damage or wear.
- Check the connections between the sensor and ECM to ensure they are secure and free of corrosion.
- Use a diagnostic scan tool to reset the ECM and clear the code, then monitor the torque request signal for proper operation.
- Test drive the vehicle to verify that the symptoms have been resolved and that the code does not reappear.
- If the issue persists, consider replacing the accelerator pedal position sensor or seeking professional assistance for further diagnosis and repair.
Cost to Fix P153D 2018 GMC Sierra
The typical repair costs for addressing the P153D code on a 2018 GMC Sierra can vary depending on the specific cause of the issue. In general, replacing a faulty accelerator pedal position sensor can cost between $100 and $200 for the part, with additional labor costs ranging from $100 to $200. However, if the issue is related to wiring or ECM malfunction, the repair costs may be higher. It is advisable to consult with a qualified mechanic or dealership for a more accurate estimate based on the specific diagnosis and repair required. Keep in mind that labor rates at auto repair shops can vary, so it's recommended to inquire about rates in your local area for a more precise cost estimate.
Need more information about the P153D 2018 GMC Sierra code?
Need more information on how to fix the P153D 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P153D 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P153D 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P153D in a 2018 GMC Sierra?
- Common symptoms include engine performance issues, reduced power, and the illumination of the Check Engine Light.
2. What does the OBDII code P153D indicating "Driver Torque Request Signal Message Counter Incorrect" mean for a 2018 GMC Sierra?
- This code suggests that there is a discrepancy between the driver's requested torque and the actual torque being delivered by the vehicle.
3. What are the possible causes of OBDII code P153D in a 2018 GMC Sierra?
- Potential causes include a faulty torque request signal sensor, wiring issues, software glitches, or a malfunctioning powertrain control module.
4. How can I diagnose the OBDII code P153D in my 2018 GMC Sierra?
- To diagnose this code, you may need to use a scan tool to read the code, check the sensor and wiring connections, and perform a thorough inspection of the torque request system.
5. Can I continue driving my 2018 GMC Sierra with OBDII code P153D active?
- It is not recommended to drive the vehicle with this code active, as it can lead to further damage and potential safety hazards. It is best to address the issue promptly.
6. How serious is OBDII code P153D in a 2018 GMC Sierra?
- While the severity of the issue may vary, it is important to address this code promptly to prevent potential drivability issues and further damage to the vehicle.
7. Are there any DIY repair tips for addressing OBDII code P153D in a 2018 GMC Sierra?
- DIY repair tips may include checking and cleaning the sensor connections, inspecting the wiring for any damage, and resetting the code to see if it reoccurs.
8. Is it necessary to take my 2018 GMC Sierra to a mechanic for OBDII code P153D repairs?
- Depending on your experience and comfort level with automotive repairs, it may be advisable to consult a mechanic, especially if the issue involves complex sensor diagnostics or module reprogramming.
9. How much can I expect to pay for repairs related to OBDII code P153D in a 2018 GMC Sierra?
- The cost of repairs can vary based on the specific cause of the code, but it may involve sensor replacement, wiring repairs, or software updates, which can range from a few hundred to over a thousand dollars.
10. Can resetting the OBDII code P153D in my 2018 GMC Sierra make it go away permanently?
- Resetting the code may temporarily turn off the Check Engine Light, but if the underlying issue causing the code is not addressed, it is likely to reoccur. It is essential to diagnose and fix the root cause of the problem.
Discuss the causes and fixes for P153D 2018 GMC Sierra OBDII Code
Code P153D 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.