Engine-CodesFord – P1507 2011 Ford Fusion

P1507 2011 Ford Fusion Code - Idle Air Control Under Speed Error

Quick Answer

The P1507 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates an Idle Air Control (IAC) under speed error. Common causes include Faulty Idle Air Control (IAC) valve, Vacuum leaks in the intake system, Dirty or clogged throttle body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1507 2011 Ford Fusion indicates Idle Air Control Under Speed Error.
Common causes
Common causes include Faulty Idle Air Control (IAC) valve, Vacuum leaks in the intake system, Dirty or clogged throttle body.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1507 2011 Ford Fusion Description

The P1507 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates an Idle Air Control (IAC) under speed error. The IAC valve is responsible for regulating the amount of air that enters the engine at idle, allowing the engine to maintain a steady idle speed. When the engine control module (ECM) detects that the actual idle speed is lower than the desired idle speed, it triggers the P1507 code.

OBDII Code P1507 2011 Ford Fusion - Idle Air Control Under Speed Error
P1507 2011 Ford Fusion Code - Idle Air Control Under Speed Error

Common Causes of P1507 2011 Ford Fusion

  1. Faulty Idle Air Control (IAC) valve
  2. Vacuum leaks in the intake system
  3. Dirty or clogged throttle body
  4. Issues with the Engine Control Module (ECM)
  5. Wiring or electrical issues

Symptoms of P1507 2011 Ford Fusion

  1. Fluctuating idle speed
  2. Rough idling
  3. Stalling at idle
  4. Engine hesitation
  5. Check Engine Light illuminated

How to Fix P1507 2011 Ford Fusion

  1. Begin by diagnosing the root cause of the issue using a scan tool to confirm the P1507 code.
  2. Inspect the Idle Air Control (IAC) valve for any signs of damage or malfunction. Replace if necessary.
  3. Check for vacuum leaks in the intake system and repair as needed.
  4. Clean the throttle body to remove any carbon buildup that may be affecting airflow.
  5. If the issue persists, further diagnostics may be required to identify any wiring or ECM issues.

Cost to Fix P1507 2011 Ford Fusion

The cost of repairing a P1507 code on a 2011 Ford Fusion can vary depending on the specific cause of the issue. In general, replacing an Idle Air Control (IAC) valve can cost between $100 and $300, including parts and labor. Cleaning the throttle body may cost around $50 to $100. Additional diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. It's recommended to consult with a professional mechanic to get an accurate estimate based on your specific vehicle and location.

Tech Notes for P1507 2011 Ford Fusion

The P1507 code means that the engine idle is out of factory specification. Sometimes the Idle Air Control (IAC) may have carbon built up. Disconnect the car battery, remove the valve, clean, re-install valve, and drive the vehicle for about 5 minutes with the headlights and A/C ON to get the idle relearned.

If the problem persistss, the IAC valve may need to be replaced.

When is the Code Detected?

The P1507 code sets when the Powertrain Control Module (PCM) detects an engine idle speed that is less than the desired RPM.

Need more information about the P1507 2011 Ford Fusion code?

Need more information on how to fix the P1507 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1507 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1507 2011 Ford Fusion Code

1. What does the OBDII code P1507 mean on a 2011 Ford Fusion?

The P1507 code indicates an "Idle Air Control (IAC) Under Speed Error," meaning the engine's idle speed is lower than expected.

2. What are the common symptoms of code P1507 in a 2011 Ford Fusion?

Symptoms may include a rough or low idle, engine stalling, difficulty starting, and an illuminated check engine light.

3. What causes the P1507 code in a 2011 Ford Fusion?

Common causes include a malfunctioning idle air control valve, vacuum leaks, clogged throttle body, or issues with the Powertrain Control Module (PCM).

4. Can a dirty throttle body cause code P1507?

Yes, a clogged or dirty throttle body can restrict airflow and lead to an idle speed error, triggering the P1507 code.

5. How do I fix the P1507 code on a 2011 Ford Fusion?

Check for vacuum leaks, clean the throttle body, inspect and possibly replace the idle air control valve, and ensure the PCM is functioning properly.

6. Can a bad idle air control valve cause the engine to stall?

Yes, a faulty idle air control valve can disrupt airflow at idle, causing stalling or rough idling.

7. Is it safe to drive with the P1507 code on a 2011 Ford Fusion?

While it may be drivable, the engine could stall unexpectedly, posing a safety risk, so it's best to address the issue promptly.

8. How can I diagnose the P1507 code in a 2011 Ford Fusion?

Use an OBDII scanner to confirm the code, then inspect the idle air control valve, throttle body, and vacuum lines for faults or obstructions.

9. Can a vacuum leak trigger the P1507 code?

Yes, a vacuum leak can disrupt engine airflow and cause the idle speed to drop, triggering the P1507 code.

10. How much does it cost to repair the P1507 code on a 2011 Ford Fusion?

Repair costs vary but typically range between $100 and $300, depending on whether cleaning, part replacement, or additional diagnostics are needed.

Discuss the causes and fixes for P1507 2011 Ford Fusion OBDII Code

Code P1507 2011 Ford Fusion comments

No comments found for this page.