Engine-Codes.com
Engine-Codes – Mercury – P1506 Mercury

P1506 Mercury Code - Idle Air Control Overspeed Error

Quick Answer

The P1506 diagnostic trouble code (DTC) for Mercury vehicles indicates an Idle Air Control (IAC) overspeed error. Common causes include Dirty or clogged IAC valve, Faulty IAC valve, Vacuum leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1506 Mercury indicates Idle Air Control Overspeed Error.
Common causes
Common causes include Dirty or clogged IAC valve, Faulty IAC valve, Vacuum leaks.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 25, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1506 Mercury Description

The P1506 diagnostic trouble code (DTC) for Mercury vehicles indicates an Idle Air Control (IAC) overspeed error. The IAC valve controls the amount of air entering the engine while the vehicle is idling. When the engine is idling, the IAC valve helps maintain a consistent idle speed by adjusting the amount of air flowing into the engine. If the IAC valve is operating outside of its normal parameters and causing the engine to idle at a higher speed than intended, the P1506 code is triggered. This can lead to erratic idling, stalling, and poor engine performance.

OBDII Code P1506 Mercury - Idle Air Control Overspeed Error
P1506 Mercury Code - Idle Air Control Overspeed Error

Common Causes of P1506 Mercury

  1. Dirty or clogged IAC valve
  2. Faulty IAC valve
  3. Vacuum leaks
  4. Carbon buildup in the throttle body
  5. Wiring or electrical issues related to the IAC valve

Symptoms of P1506 Mercury

  1. Fluctuating idle speed
  2. Engine stalling at idle
  3. Rough idling
  4. Poor fuel efficiency
  5. Check engine light illuminated

How to Fix P1506 Mercury

  1. Diagnose the issue by using an OBD-II scanner to confirm the P1506 code.
  2. Inspect the IAC valve and clean or replace it if necessary.
  3. Check for vacuum leaks and repair or replace any damaged hoses.
  4. Clean the throttle body to remove any carbon buildup.
  5. Test the vehicle to ensure the issue is resolved and clear the DTC.

Cost to Fix P1506 Mercury

The cost to repair a P1506 code on a Mercury vehicle can vary depending on the specific cause of the issue. In general, the cost of replacing an IAC valve can range from $100 to $300, including parts and labor. If additional repairs or diagnostics are required, the total cost could be higher. It's recommended to consult with a qualified mechanic or dealership to obtain a more accurate estimate based on your vehicle's make and model. Keep in mind that labor rates and part prices can vary based on location and other factors.

What does this mean?

Tech Notes for P1506 Mercury

The P1506 code means that the engine idle is out of factory specification. Sometimes the Idle Air Control (IAC) may have carbon built up. Disconnect the car battery, remove the valve, clean, re-install valve, and drive the vehicle for about 5 minutes with the headlights and A/C ON to get the idle relearned.
Also, check for intake leaks or stuck PCV Valve.
If the problem persistss, the IAC valve may need to be replaced.

When is the Code Detected?

The P1506 code sets when the Powertrain Control Module (PCM) detects an engine idle speed that is greater than the desired RPM.

Need more information about the P1506 Mercury code?

Need more information on how to fix the P1506 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1506 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1506 Mercury Code

No Frequently Asked Questions about P1506 Mercury Code found.

Discuss the causes and fixes for P1506 Mercury OBDII Code

Submit a New Comment

Code P1506 Mercury comments

No comments found for this page.